OWNER’S MANUAL Hybrid Digital Video Recorder Please read this manual carefully before operating your set and retain it for future reference. MODELS LE5016/LE5008 Series LE4016/LE4008 Series 1304 (V3.
Safety Information 1 Safety Information 1 Safety Information CAUTION This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: Do not install this equipment in a confined space such as a bookcase or similar unit. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Information Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
Safety Information Safety warnings and Cautions 1 Safety Information The following are warnings and cautions for the safety of the users and for the prevention of any property damage. Please read the following carefully. WARNING • Turn off the system before installation. Do not plug in several electric devices to the same outlet. -- • -• This may cause fire, over heating or electric shock.
Safety Information 5 CAUTION Please beware of the following precautions before installing the DVR. Avoid positioning the product in any place where the unit may come into contact with moisture, dust, or soot. • Avoid placing in direct sunlight or near heating appliances. • Keep the product away from electric sparks or magnetic substances. • Do not place any conductive material through the ventilation grills. • Keep the system turned off before installation.
Contents Contents 1 20 Main Monitor Screen 21 Selecting the Main Monitor screen mode 22 Selecting the Spot Monitor screen mode 22 PTZ Camera Control 23 Using the Digital Zoom function 24 Viewing System Information 24 Viewing the System Log List 25 Export the recorded data Safety Information 26 Configuration menu 27 System settings 3 27 Properties 27 TCP/IP v4 27 TCP/IP v6 28 Network Preparation 28 Network Streaming 29 Date/Time 8 29 NTP Controller IMPORTANT SAFETY
Contents 41 SNMP 67 Emergency Agent Program 41 Output 68 Export Viewer Program 42 Buzzer 69 Web Viewer Program 42 1 User settings 42 Group Authority 43 User 4 Operation 44 Instant Recording 44 Panic Recording 45 Instant Playback 45 Search and Playback 6 Troubleshooting Appendix 74 74 Recommended USB Memory list 74 Recommended External Device list 74 Recommended CD/DVD Media list 45 Event Search 75 Supported function list for device 46 Bookmark Search 75 Supported
Preparation 2 Preparation 2 Preparation Introduction Model LE5016D (16 Channel) is used for the description, operation and details provided in this operating guide. Features • Automatic backup by schedule. • Image authentication (Watermark). • Three USB 2.0 ports for backup interface. • Setup configuration export/import with USB memory stick. • Easy system S/W update with USB memory stick. • Clients S/W can manage max 300 DVR servers.
Preparation 9 Front Panel Front of the LE5016/LE4016 series a b c d e f g h i j k 2 Preparation l m n o p q o r s t Front of the LE5008/LE4008 series a b l a b c m d n e f o p g h i q o r j k s t 1 (Power): Turns DVR on or off. Press and hold for more than 2 seconds to turn on or off. Indicator • NET: Lights when the network is connected. • HDD: Blinks when the HDD is accessed. • ALARM: Lights when the alarm out is in progress.
Preparation • 2 Sub-functions Preparation Button number Function Description 3/4 FOCUS / FOCUS + 5 OSD Accesses or removes the System Control Bar (OSD). 6 INFO Displays or removes system information. 7/8 IRIS - / IRIS + 9 ALM.OFF 10/0 LOG Displays or removes the System Log List. 11 SET Registers the PTZ camera’s preset position. 12 CLEAR Deletes a memorized preset position. 13 COPY Copies the recording data to an external device.
Preparation 11 Rear Panel Rear of the LE5016/LE4016 series a b c 2 Preparation d e f g h i Rear of the LE5008/LE4008 series a d e f g h j kl b i j m n o p q n k p l m c o q a VIDEO INPUT: Connect the camera’s video output to these BNC connectors. b LOOP OUT: The signal from VIDEO INPUT connector is looped out to this connector. c Power Cord Inlet (AC IN): Connect the power plug. d RS-485 Terminals: Connect RS-485 compatible cameras.
Preparation Remote Control Button POWER (1) LOCK Description Turns DVR on or off. Displays the lock menu to change user type or disable system operation. 2 ID Preparation MAIN Displays or removes the screen setup menu for MAIN monitor. SPOT Displays or removes the screen setup menu for SPOT monitor. ALM.OFF OSD SETUP/ESC wsad Set the appropriate DVR system ID to operate via the IR Remote Controller when using the multiple DVR.
Installation 13 3 Installation Connections Precautions 3 Depending on the camera and other equipment there are various ways to connect the unit. Please refer to the camera manual or manuals for other devices as necessary for additional connection information. • Be sure to switch off the camera before installation and connection. Basic Connection Overview Connect the coaxial-type cameras Connect the Monitor, DVR, VCR, or others. Connect ATM/POS unit. For audio amplifier Connect power cord.
Installation Connecting Camera VGA Monitor connection Connect the video output of your camera to the unit, using a standard 75 Ω video coaxial cable with BNC connector. Connect the VGA jacks on the rear of the unit to the corresponding input jacks on the TV or monitor using the VGA cable. Camera connection VGA Monitor connection 3 Installation Connecting Display device This unit can be outputted simultaneously from the VGA and MAIN OUT jack.
Installation Connecting USB device USB device connection 15 Connecting E-SATA device You can use E-SATA storage for data back-up or recording. E-SATA device connection 3 Installation Connecting ATM/POS Connect the ATM/POS unit to the ATM/POS port. ATM/POS device connection USB Memory device Insert the memory device into the USB port. The system automatically recognizes the device. Using a USB memory device the system software can be easily upgraded.
Installation NOTE • The following device has been tested and compatibility is ensured. When you use the multiple ATM/POS device use the recommended device. -- • NOTE AVE Products ›› VSI-PRO: Video serial interface ›› Regcom: RS-485 networker ›› Hydra: RS-485 to RS-232 converter This unit can be supported IPv4 and IPv6 network. Connecting RS-485 device This DVR has two data terminals. Use this port to connect PTZ cameras, DVRs or keypads (optional).
Installation Connecting LKD1000 controller Connect the LKD1000 controller to control the DVR. (Refer to the manuals of the LKD1000 controller for more details.) The LKD1000 controller has to be connected to the 2 (DATA 2) port as shown illustration. If you connect the LKD1000 controller to the 1 (DATA 1) port, the LKD1000 controller will not be activated.
Installation Alarm Output Connect the alarm device to the alarm output. Alarm signal output at an event occurrence. HDD INSTALLATION Note for Hard Disk Drive Alarm output connection The internal hard disk drive (HDD) is a fragile piece of equipment. Please follow the guidelines below when using the DVR to protect against possible HDD failure. We recommend that you back up your important recordings onto an external backup device in order to prevent accidental loss.
Installation 7. Connect the SATA cable to the SATA connector on the main board. 19 System Operation 8. Assemble the top case. 9. Fix the screws. 10. When you turn the power of the unit on, the new HDD is detected and formatted automatically. 1. Turn on the unit. System booting will commence. The LG logo image will be displayed on the main monitor during the system booting. Replacing the Hard Disk Drive 2. When the booting is complet the live window will be displayed.
Installation General Explanation of the Live Screen on the Main Monitor e Live Screen Displays the current surveillance live screen. f System Control Bar Displays the current date and time. Main Monitor Screen ab c d e f Displays the setup menu. Displays the search menu. 3 Installation Displays the PTZ remote control window. Displays the screen division selection window for the main monitor. Displays the screen division selection window for the spot monitor.
Installation You can capture and save the current image in JPEG file format. You should connect the external device to save the capture image. Selecting the Main Monitor screen mode 1. Playback the recorded data. 1. Press MAIN or click the 2. Pause the playback at a desired point during playback. 3. Click this button. The device selection window is displayed. 21 You can select the live screen mode to display a full, 4-split, 6-split, 8-split, 9-split or 16-split screens on the main monitor.
Installation Selecting the Spot Monitor screen mode PTZ Camera Control You can select the live screen mode to full or 4-split screens on the spot monitor. You can control the cameras connected via the data port of RS-485 terminal or Network. You must set the configuration between the PTZ camera and the DVR. 1. Press SPOT or Click the icon in the system control bar. Screen mode select menu of spot monitor is displayed on the main monitor. 2. Select screen mode.
Installation To Register Preset Positions Setup for PTZ Cameras 1. Move the camera to a point you wish by using the , , , buttons. You can adapt the camera to your requirements by setting up the respective items in menus. 3. Select the preset number you wish to register. 1. Click the icon. The setup menu appears in the selected window of the main monitor. 4. Press ENTER or click the 2. Use 2. Press SET or click the 23 icon. icon. , The position and its number are memorized.
Installation Viewing System Information To view system information: Refer to the following system log list. No. Log Message 1 Power On 2 Power Off 3 Login (Remote) 4 Logout (Remote) 5 Login (Local) 6 Logout (Local) 3 7 Configuration Changed Installation 1. Press the INFO button or click the icon in the system control bar. The system information window is displayed on the main monitor.
Installation Export the recorded data NOTE This unit can manually copy recorded images and audio from builtin HDD to the external recording devices. • Check the export device before you proceed. 1. Press COPY or click the • You can also use the COPY button on the front panel for export function. • You can export the recorded data only in the live mode. • If you use the external device, the external device has to be formatted on this unit. icon in the system control bar.
Installation Configuration menu Setting the Menu Using the Front Panel Buttons or Remote Control Buttons Front Panel The features and options of the DVR are configured through the menu. The operations of this unit can be set via a menu displayed on the main monitor. You can select and set the operational conditions by using the buttons on the front panel and the remote control or using a Mouse connected to the unit.
Installation System settings 27 TCP/IP v4 Properties 3 DVR Name: Enter the DVR name by using alphabetic letter and numeric digit up to 21 characters. NOTE • If you set the DVR name by Korean or Japanese, use the system setting menu of the LG Network Client program. • If you set the DVR name to Korean or Japanese, you should set the system language to Korean or Japanese to display the DVR name correctly. • Language: Select a language for the setup menu and information display.
Installation Network When you want to change DDNS host name If you want to change the registered host name to new one, follow as shown below. 1. Enter a new host name in the [Host Name] option. 2. Press the [Update] button. The confirmation window will be displayed to change your host name. 3. Click the [OK] button. When host name is properly changed, the changed host name will be displayed in the [Registered Host] option. If host name is not changed after updating, please check network connection.
Installation Date/Time 29 NOTE If the NTP option is not set to this system, there can be a gap between the system time and actual time. Using NTP is recommended. Controller 3 Date: Select the current year, month and day. • Time: Select the current time. • Date Format: Select the date display format. • Time Format: Select the time display format. • Time Zone: Select the time zone in the area where the DVR is installed. • Daylight Saving: Mark up when you use the daylight saving function.
Installation NOTE If you select the update method to [LOCAL], the [FTP Server] option will be disabled and the [Device] option is activated. And if you select update method to [NETWORK], the [Device] option will be disabled and [FTP Server] option is activated. 3. Select the [Search] button and press ENTER. The update file is displayed in the list. 4. Choose the update file from the list. 5. Select the [Update] button and press ENTER. The confirmation window is displayed. 3 Installation 6.
Installation Device settings NOTE • The backup function is not supported on the external USB CD-ROM driver. • Available external device for backup. Device USB HDD E-SATA HDD Camera Capacity Less than 1 TB. Up to 2 TB. Use the recommended external USB devices for preventing malfunction (See the page 74). • The CD-R, DVD-R or DVD+R discs cannot be formatted. • DVD+RW and DVD-RW discs have to be initialized before using. • An external media has to be formatted on this unit to prevent malfunction.
Installation NOTE IP Camera If you set the channel name to Korean or Japanese, you should set the system language to Korean or Japanese to display the channel name correctly. 3 Installation • Port: Selects the connected data port of the RS-485 terminal on the rear panel. The DATA 2 port is used to control the PTZ camera connected to DVR or to control by using the LKD1000 controller. If you want to use the PTZ camera via DATA 2 port, you should set the [Remote Controller ID] to [NONE].
Installation ATM/POS NONE: Selects when the ATM/POS device is connected with the DVR directly. -- AVE Hydra: Selects when the ATM/POS device is connected via the AVE Hydra device to the DVR. If you set to AVE Hydra, the [Camera], [Baud Rate], [Data Bits], [Stop Bits] and [Parity] options are dimmed and these options are not set. • Camera: Select the camera number for mapping with ATM/POS device. • Baud Rate: Select the desired parameter to set the communication speed between DVR and ATM/POS device.
Installation Display settings Channel Composition OSD 3 Installation • Channel Name: Mark up to display or remove the channel name in the channel window. • Channel Status: Mark up to display or remove the channel status in the channel window. • Font Size: Selects the font size of characters such as the channel name and playback time which displayed on the channel window.
Installation 35 Record settings Schedule A schedule recording can be activated at preset times, in a repeating pattern on selected weekdays. The DVR can record according to a schedule set by the user. It can also record manually regardless of date and time. The recording can be made either continuously or triggered by events (alarm and motion detection). The recording schedule screen displays one day of the week showing the schedule of all channels over a 24-hour period.
Installation • Sky blue (Continuous+Sensor+Motion+Text event recording): Recording starts automatically from the preset time. When the sensor alarm signal has input, motion has been detected or the text input occurs within a designated time, change the continuous recording mode to occurred event recording mode and recording starts automatically. 5. Select the next time cell block of schedule time cell blocks to confirm the schedule time. 6.
Installation • Ch: Displays the channel number. • Resolution: Selects the recording resolution. • Quality: Selects the recording picture quality. • Frame Rate: Selects the frame rate. The frame rate is the number of recorded frames per second. According to resolution, the frame rate is set automatically. 37 Motion Settings concerning motion recording. NOTE In case of the LE4000 series models, the resolution setting is possible in the Normal setting menu only.
Installation • Prealarm: Specify the pre-event recording time. When the Event signal is detected, the DVR is recording the data before the event during the setting time. • Postalarm: Specify the post-event recording time. When the Event signal is detected, the DVR is recording the data after the event during the setting time. Event settings Sensor Instant/Panic Settings concerning instant/panic recording. 3 Installation • Ch: Displays the channel number.
Installation • Relay Output: Select the number of the RELAY-OUT terminal for the output alarm (relay) signal when motion is detected. • Area: Select the desired motion detection area on the preview window screen. • Delimiter: Enter the character(s) that the device uses to indicate the end of a line. Refer to the device manufacturer’s documentation for Line Delimiter character(s). • Ignore String: Enter the any strings of text that you want the DVR to ignore.
Installation Notification • User Name: Enter the user name. Marks up when you want to activate the selected option. If the selected notification option is activated, the device will notify the user about the information of selected option by E-mail. • Password: Enter the password. • TLS: Marks up when using the TLS (Transport Layer Security) function. • Mail Address (1 to 3): Enter the mail address. You can input up to 3 e-mail addresses.
Installation SNMP 41 Output The Simple Network Management Protocol (SNMP) is an application protocol to exchange the management information of network devices. 3 • SNMP Version: Selects a SNMP version if SNMP is allowed to access to this device. • Port: Enter the number for SNMP port. • Community String (V2 only): Specifies the SNMP management community in which you want to enable this system (e.g. lgecommunity or public). • User (V3 only): Enter the security name for the SNMP.
Installation Buzzer Marks up when you want to activate the selected option. User settings Group Authority You can register a new user group with various access rights. 3 Installation • Sensor: Makes a sound when a sensor occurs. • Motion : Makes a sound when a motion is detected. • Text: Makes a sound when the DVR detects text input. • System: Makes a sound when a cooling fan is not activated or the HDD has bad sector. • Group ID: Select the group ID to assign authority.
Installation 43 User You can set the user name for the selected User ID. 3 2. Enter the user name of the selected user ID. 3. Select the user group from the drop-down list. 4. Enter the Password. 5. Select the auto user logout time from the drop-down list. 6. Press the ESC button to display the confirmation window. 7. Select [OK] to save the setting or [Cancel] to cancel the setting.
Operation 4 Operation Instant Recording 4 Images from a camera will be recorded on the built-in hard disk. Ensure all the cameras are connected and that time and date have been set correctly. Before you start recording, first check the repeat recording settings in the recording menu of the system setup, and then make the recording settings. NOTE • External recording devices can be used as copy areas for images recorded on the hard disk.
Operation Instant Playback 45 6. Press ad (Play) button or click the [Play] button to start playback. The picture(s) is (are) displayed on the main monitor. 7. Press STOP (Z) to stop playback and return to the search menu. It is possible to play a recorded image without stopping recording. 8. Press SETUP/ESC to exit the[Date/Time] menu. 1. Select a channel you want to playback. 2. Press ad (Play) button to play a recorded image of the previous 1 or 2 minutes of recording.
Operation 4. Use w/s/a/d button to select the channel and press ENTER button to confirm the selection. If you want to select the all channels, marks up the [All Channels] option. 5. Select the [Event Type] then press ENTER. ATM/POS Search Search the recorded text information by ATM/POS device. This function is available with backup data of the internal or external HDD only. 6. Use w/s to select the event type then press ENTER. 7. Select the [Search] icon then press ENTER. The event list menu appears.
Operation Export Search Search an exported data from the external device or internal DVD-ROM device. If you want to use this function, you have to connect the external device or insert the CD/DVD disc with exported data otherwise the warning message will be displayed. Check the export device before you proceed. 47 1. Use w/s to select the [Smart] icon then press ENTER. The smart search menu is displayed. 2. Select the desired source device. 3.
Operation Functions Available During Playback Button System Control Bar Remote Control Function Front panel Stop playback. Pause playback. 4 Jump to the beginning of the current data that was recorded on the same date. (press the button for more than 2 seconds.) Operation Jump to the last 1 minute of the current data that was recorded on the same date. (press the button for more than 2 seconds.) Press repeatedly to select the required scan speed.
LG Network Client Program 49 5 LG Network Client Program Introduction Getting Started The LG Network Client program is an IP-Surveillance software that works with the LG DVR/NVR to provide video monitoring, recording setting and event management functions. The software has multiple search functions for recorded events. Remote viewing and playback are also possible with the use of the LG Network Client.
LG Network Client Program LG Network Client Overview Selected Menu Tab Menu Bar File End Backup Search Use to stop and exit the backup search function. Software Update Use to upgrade DVR/NVR software or add/upgrade PTZ protocols. Live window Tool Bar 1. Log-in the Network Client program as the permitted user who has the Group Setup authority. 2. Click this option. The Update setting window is displayed. 3. Select the update device from the list.
LG Network Client Program View Language Select the language for LG Network Client program. Resolution Select the resolution of the LG Network Client program. Video Adjustment 1. Use : Marks up to activate the video adjustment. Tool Bar Icon Brightness : Adjust the brightness value from 0 to 100 for the current playback channel. • Contrast : Adjust the contrast value from 0 to 100 for the current playback channel. • Hue : Adjust the hue value from 0 to 100 for the current playback channel.
LG Network Client Program Information Display Window Add the Site Name Displays current date and time, user information and the remaining HDD status of the selected site name. 1. Click the [Add] button. The Connection Setup window is displayed. NOTE • Check the box of the DVR/NVR Time option to display the DVR/NVR Server Time. • The DVR/NVR Time option is activated more than the LG Network Client Version V3.0.2 and the DVR/NVR server version V1.0.6.
LG Network Client Program About the pop-up menu • User Log-In: Select to connect the DVR/NVR manually. • User Log-Out: Select to disconnect the site name. • Connect: Select to connect to the DVR/NVR automatically. You should set the User ID and Password option of the connection information setting menu for using this function. • Disconnect: Select to disconnect to the site name. 53 Using the Live function Camera View Tab 3. Repeat step 1 to 2 to connect the other site name.
LG Network Client Program Instant playback NOTE • • • It is possible to play a recorded image without stopping recording. To delete the camera from Live Window, Click desired channel number on the [Cameras] and then drag drop where not Live window position but other position. Configuration of camera view is set the first time only. This configuration setup is memorized for the next time and displayed as it is. About the camera view menu tree. Displays the registered site name or group name.
LG Network Client Program Pan/Tilt/Zoom Tab To Register Preset Positions You can control the PTZ cameras via the network. 1. Move the camera to a point you wish. 1. Select the PTZ camera channel window in the camera view mode. 2. Click the [SET] icon. 2. Select the Pan/Tilt/Zoom tab. 4. Click the icon. The position and its number are memorized. 3. Use virtual remote control buttons to control the PTZ camera. 3. Select the preset number you wish to register. 5.
LG Network Client Program Log View Tab Edit the favorite You can see the system log list of selected site name. 1. Select the registered favorite name and click the right mouse button. 1. Select the [Log View] tab. 2. Click the icon and select starting and ending date. (The selectable date is displayed in blue color.) 3. Enter starting and ending time. 4. Select a log type from the drop-down list. 5. Click the icon. The system log is displayed in the list. 6.
LG Network Client Program the plus mark. 5. Select the channel number what you want to view. 6. Click the channel number and drag and drop to live window position. 7. Select the time using the Time line and Time input column to search recorded data. 3. Click the the list. icon. All bookmark (or Protect) data is displayed in 4. Select the data in the list. 5. Play the searched bookmark data using the playback control buttons. 8. Play the searched data using the playback control buttons. 6.
LG Network Client Program Using the Remote Setup function buttons. ATM/POS Search Tab You can set the DVR/NVR configuration of a selected site name using this function. Searches the recorded text information by ATM/POS device. This function is available with backup data of the internal or external HDD only. NOTE Options which do not support on this unit are deactivated.
LG Network Client Program NTP • NTP: Mark up, if you want to synchronize the DVR/NVR’s date and time with those of the time server called NTP (Network Time Protocol) Specify the NTP server’s name. • Time Server: For most cases select public. The DVR/NVR will obtain the average time among 5 public servers (time.nist.gov, time-a.nist.gov, time-b.nist.gov, ntp.nasa.gov, clock.isc.org). • Private Time Server: Enter the private time server’s IP address or host name. • Sync.
LG Network Client Program • Stop Bits: Select the desired parameter. The stop bit is added to the last of data, in asynchronous communication. • Parity: Select the desired parameter. The parity bit is added to the data, to perform parity check. Storage • Overwrite: -- All: Overwrite recording is possible when the partition of HDD have fully recorded. -- Normal Partition: Overwrite recording is possible for normal partition of HDD when the normal partition of HDD has fully recorded.
LG Network Client Program Motion Settings • Sensitivity: Set the sensitivity level for the created motion detection area. • Relay Output: Select the number of the RELAY-OUT terminal for the output alarm (relay) signal when motion is detected. • Area: The factory default of the Motion detection area is set as the whole area. You can change the area by using mouse on the preview window screen. -- Select All: Click one point with the left mouse button and drag & drop to the end point.
LG Network Client Program automatically. Event Settings 3. Select the desired channel to schedule recording. 4. Click the start time cell block and drag & drop to select a time period cell block. or Click the start time cell block of a channel and drag & drop across the channels to select the time period block for multichannel setting at the same time. The color of the cell blocks will be changed. Schedule day copy settings 1. Select the source day to copy. 2.
LG Network Client Program NOTE • ATM/POS Recording Information. Sensor On: Sends an e-mail when a sensor has occurred. Recording is started automatically When the Transaction when the Transaction start data is Start and Transaction End detected. When the Transaction options are set. end data is detected, the recording is stopped after post-alarm time. • Motion Detection: Sends an e-mail when an motion detection has occurred. • Text In: Sends an E-mail when the text input is detected.
LG Network Client Program Emergency User Settings 1. Click the [Setup] button. 2. Set the below options. • Notification: Mark up to be notified the emergency agent about the unit's operating information according to your notification settings. • Host Name/Port: Enter the Host Name and port number of the emergency agent program. The factory default port for this function is 9002. However in some cases it is better to change this port number for added flexibility or security.
LG Network Client Program Using the Export function How to export the data You can copy the recorded images and audio data from the DVR/ NVR unit to the PC. This function is permitted for Administrator and other group users who have the Export authority. 2. Select the audio option. 65 1. Set the Channel options. You have to select more than one channel. • On: Select when the Audio data is exported. • Off: Select when the Audio data is not exported. 3. Set the Date/Time options. 4.
LG Network Client Program Using the E-Map function Add the Map This function gives a visual overview of the cameras in your surveillance environment. 1. Click the [Add E-Map] button. The Add E-Map window is displayed. E-Map Overview 3. Find and open the map image file. If you want to change the E-Map name, select the [E-Map Name] option and overwrite the existing name with a new name. Map View Division Mode selection icons E-Map setup icon E-Map View window 2. Click the [...
LG Network Client Program Using the Multiple Window function This function allows you to see a live screen maximum 64 channel by using two monitor. 1. Click the 67 Additional Programs to change to the live mode. 2. Select the [Mutiple Window] option on the [Tools] menu. The [Live 2] window appears. Emergency Agent Program The system sends a message according to the Notification and Emergency settings in the event setup menu. Emergency Agent Overview Displays the received message list.
LG Network Client Program To activate the Emergency Agent program 1. Run the [LG Emergency Agent] program. The Emergency icon is displayed in the system tray. 2. Whenever a notification function occurs, a message box is displayed on the bottom right of the screen. The message box is displayed for 5 seconds. 3. Check the message. 4. Click the message box within 5 seconds to display the [Received Messages] window.
LG Network Client Program Playback control buttons Jumps to the beginning or end of the file. Click this button repeatedly to play frame-byframe playback in reverse. Click this button to play reverse or normal playback. Click this button repeatedly to play frame-byframe playback. Web Viewer Program Logging in the Web Viewer 1. Start the web browser. The recommended browser is Internet Explorer with Windows. 2. In the Address Box, enter “HTTP://” and the IP Address of the DVR.
LG Network Client Program You can capture and save the current image in JPEG file format. The initial save folder is “C:\LG Exported Files”. If you want to change the storage folder, set the [Save Path] option on the WebViewer Control Properties Window. Event Search 1. Select the channel window. 4. Select the camera channel for event search. 2. Mark up the selected channel name. 5. Select the event type. 3. Search the recorded data and then play the recorded data. 6. Click the icon.
Troubleshooting 71 6 Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptoms Resolutions Check the power cable is connected correctly. The system power does not turn on. Check the input voltage is correct. If the system power does not turn on even if the power cable is connected correctly, please contact the service center. Check the monitor power cable is connected properly.
Troubleshooting Symptoms Resolutions Check the audio recording option is correctly set for the camera you wish to record audio. Audio data recorded with video data is not playing. Check the speaker and audio (line input) on the rear of system are connected correctly. Check the connected speaker is working properly. If the camera connected to the system has a problem, make sure that the camera is not damaged by trying another camera into a working video output.
Troubleshooting Symptoms 73 Resolutions E-mail reception failed without SMTP server setting. • Make sure the network is correctly set. • Make sure the mail address is input correctly. • Check the spam mail setting of the inputted mail address. (If you set the spam mail, some mails are deleted automatically or classified in the spam mail box) • Some of SMTP mail services do not support an E-mails from private SMTP servers. In this case use the public SMTP server.
Appendix 7 Appendix Recommended Devices Recommended USB Memory list No.
Appendix 75 Supported function list for device Device Instant backup Schedule backup Export Configuration Import/Export CD/DVD O X O X USB memory O O O O USB HDD O O O O E-SATA HDD O O O O NOTE If you use a USB memory stick or USB HDD for configuration import/export you must disconnect the other external USB devices.
Appendix Time zones Timezone Abbreviation Timezone Eniwetok, Kwajalein EK -12:00 Midway Island, Samoa MIS -11:00 Hawaii HAW -10:00 Alaska ALA -09:00 -08:00 Pacific Time (US and Canada); Tajuana PST -08:00 -07:00 Mountain Time (US and Canada), Chihuahua, La Paz, Mazatlan, Arizona MST -07:00 -06:00 Central Time (US and Canada), Saskatchewan, Guadalajara, Mexico City, Monterrey, Central America CST -06:00 -05:00 Eastern Time (US and Canada), Indiana (East), Bogota, Lima, Quito
Appendix 77 Factory Default Configuration Settings 1st level 2nd level System Properties TCP/IP v4 TCP/IP v6 Network Streaming Default Setting Factory Default setting DVR Name NULL YES Language The option depends on the model.
Appendix Date (2010.01.01) NO Time Current Time NO Date Format YYYY/MM/DD YES Time Format 12 HR YES Time Zone The option depends on the model. NO Daylight Saving OFF NO Daylight Saving Start JAN, 1st, SUN, 00 NO Daylight Saving End JAN, 1st, SUN, 00 NO NTP OFF YES Server PUBLIC SERVER YES Private Time Server NULL YES Sync.
Appendix Device IP Camera ATM/POS Storage OSD Sequence Channel Composition Video Adjustment IP 01 - Driver NONE YES Profile NULL YES Host Name NULL YES User Name NULL YES Password NULL YES RTSP Port 554 YES HTTP Port 16 YES Test - - Interface Device NONE YES Camera CH 01 YES Baud rate 9600 YES Data Bits 8 YES Stop Bits 1 YES Parity NONE YES Storage ALL YES Serial Number - - Overwrite ALL YES Full Warning OFF YES Auto Delete OFF YES Event Pa
Appendix Record Schedule Normal Sensor 7 Appendix Motion Text Instant/Panic SUN S+M YES MON S+M YES TUE S+M YES WED S+M YES THU S+M YES FRI S+M YES SAT S+M YES SP N YES List - - Add - - Ch Copy - - Day Copy - - Ch - - Resolution 352X240 (NTSC)/352X288 (PAL) YES Quality STANDARD YES Frame Rate 30 (NTSC)/25 (PAL) YES Ch - - Resolution 352X240 (NTSC)/352X288 (PAL) YES Quality STANDARD YES Frame Rate 30 (NTSC)/25 (PAL) YES Prealarm 10 SEC
Appendix Event Sensor Motion ATM/POS Data Format Event Popup Notification Emergency - YES Sensor Type N.O.
Appendix Event SNMP Output Buzzer User 7 Group Authority Appendix User SNMP Version NONE YES Port 161 YES Community String public YES User NULL YES Authentication NONE YES Password NULL YES Privacy NONE YES Password NULL YES Trap IP Address NULL YES Trap Community String NULL YES Relay Off ALARM ACKNOWLEDGE YES System Alarm Out NONE YES HDD Fail Alarm Out NONE YES Video Loss Alarm Out NONE YES Fan Fail Alarm Out NONE YES Sensor OFF YES Motion OF
Appendix 83 Recording Time Table (250GB HDD) Recording Time(Hr) Resolution (NTSC/PAL) Quality LOW 352x240 / 352x288 STANDARD HIGH HIGHEST Video(NTSC/PAL) Video + Audio(NTSC/PAL) 8ch 16ch 8ch 16ch 30/25 1022/800 511/400 838/683 461/368 15/12.5 1188/1142 594/571 947/917 527/509 10/8 1508/1416 754/708 1139/1086 649/615 7.
Appendix LOWEST LOW 704x240 / 704x288 7 STANDARD HIGH Appendix HIGHEST 30/25 563/425 281/212 502/389 265/203 15/12.5 764/602 382/301 657/533 353/283 10/8 899/771 449/385 753/661 410/356 7.5/6 949/888 474/444 788/746 431/405 5/5 1175/925 587/463 938/772 522/421 3/3 1235/980 617/490 976/810 545/443 1/1 1553/1337 777/669 1165/1039 666/585 30/25 469/330 235/165 426/308 223/159 15/12.
Appendix LOW 704x480 / 704x576 STANDARD HIGH HIGHEST 30/25 302/236 151/118 284/224 146/115 15/12.5 430/337 215/169 394/315 206/163 10/8 470/435 235/217 427/398 224/208 7.5/6 573/516 287/258 511/465 270/245 5/5 712/536 356/268 618/481 331/254 3/3 876/683 438/342 738/596 401/318 1/1 1250/999 625/500 986/823 551/451 30/25 236/169 118/84 225/163 115/83 15/12.5 322/237 161/118 301/225 156/115 10/8 381/307 191/153 352/288 183/149 7.
Appendix Specifications LE5008 Series LE5016 Series LE4008 Series LE4016 Series 8 16 Loop Through 8 16 Composite 1 1 VGA 1 1 Spot 1 1 Input 2 4 Output 2 2 Input 8 16 Output 2 4 Model Input Video Output Audio Alarm Pre-Alarm Recording NTSC Recording Frame Rate (/Second) PAL Search Appendix Serial I/F Network Security Up to 240 IPS @ 352x240 Up to 480 IPS @ 352x240 Up to 200 IPS @ 704x576 Up to 400 IPS @ 704x576 Up to 200 IPS @ 352x288 Up to 400 IPS @ 352x28
Appendix Power AC Free 100~240 V, 50/60 Hz Power Consumption Maximum 80 W (with 4 HDD) Dimension (WxDxH) 430 mm x 430 mm x 96 mm Net Weight (without HDD) Operation Temp. / Humidity 6.85 kg 87 6.
AB28
