Owner's Manual

24
Installation
3
Installation
Viewing System Information
To view system information:
1. Press the INFO button or click the icon in the system
control bar. The system information window is displayed on the
main monitor.
• Refresh: Press this button to update the system information.
• HDD: This button is displayed when you change the format
of the storage by using the [Device>Storage>E-SATA
Recording Support] option of the setup menu. Press this
button to display the detail information of the HDD.
2. Press the INFO button or click the [Exit] button to exit the
window.
NOTE
If you set the DVR name to Korean or Japanese, you should set the
system language to Korean or Japanese to display the DVR name
correctly.
Viewing the System Log List
To view the system log list:
1. Press the LOG button or click the icon in the system
control bar. The system log list window is displayed on the main
monitor.
2. Use
a/d
to see the previous or next log list.
3. Press the LOG button or click the [Exit] button to exit the
window.
NOTE
Refer to the following system log list.
No. Log Message
1 Power On
2 Power Off
3 Login (Remote)
4 Logout (Remote)
5 Login (Local)
6 Logout (Local)
7 Configuration Changed
8 Configuration Imported
9 Factory Default Set
10 Power Recovery
11 Backup Started
12 Backup Finished
13 Backup Failed
14 Export Started
15 Export Finished
16 Export Failed
17 S/W Updated
18 System Fan Failure
19 HDD Damaged
20 HDD Added
21 HDD Deleted
22 HDD Formatted
23 HDD Changed