OWNER’S MANUAL Digital Video Recorder Please read this manual carefully before operating your set and retain it for future reference. MODEL LE6016N LE6016D P/NO : COV30400919 1105(V1.
1 Safety Information Safety Information 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Information Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. Caution: This installation should be made by a qualified service person and should conform to all local codes. Caution: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. Caution: This product employs a Laser System.
1 Safety Information IMPORTANT SAFETY INSTRUCTIONS Safety Information 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Safety Information • The purpose of the following safety precaution is to prevent any unexpected risk or damage by using the product accurately as intended. • Warning • Turn off the power of the product before installing the product. Do not plug many plugs into one outlet. -- • -• • When wiping the surface of the product, do not use water, chemical or detergent, and always use a dry towel. -- • It can cause an electric shock, problems or scratches to the surface of the product.
Safety Information • 1 Safety Information For old hard drives, you may not be able to recover the data stored on the drive. When you use a damaged hard drive, you will see a sign on the screen saying “Error or defective”. For the old hard drive, contact your nearest service center or the original retailer to replace the hard drive. -- LG Electronics is not responsible for the data loss from misuse by the user.
Safety Information • Firmly fixate the product at a location where it is well ventilated. -- The power outlet must be grounded. • If you hear any noise or smell any odor from the product, turn the product off and contact your nearest service center. -- • It can cause a fire or an electric shock. Periodically have the product checked by the service center to safety use the product -- When replacing the battery, always replace with the same type of battery as the one provided.
Contents 1 Safety Information 4 IMPORTANT SAFETY INSTRUCTIONS 5 Please follow the directions safely use the product 15 2-6. Connection and initial setting 16 RS-485 connection 16 Control port (Output) connection 17 Sensor (Input) connection 17 About internal hard disk 18 Hard disk installation or replacement 3 Functional description 22 2 Before use 10 2-1. Product characteristics 11 2-2. Components 11 2-3. Front side 11 LE6016D model 12 LE6016N model 13 2-4.
51 Time search 52 Event Search 54 Backup 4 Web viewer 58 4-1. Installation 58 Web viewer installation 60 4-2. Functional description 60 Web viewer monitoring window 61 Web viewer search window 62 Search dialog box 63 Saving as AVI file dialog box 5 70 6-2. Recommended device to use 70 List of recommended USB memory 71 Recommended list of CD/ DVD media 72 List of supported PTZ camera 73 6-3. Initial setting list for factory default 80 6-4.
Before use 2 Before use 2 2-1. Product characteristics Before use • Adopted the stable Embedded Linux • Stable file system recovery even after power supply is disconnected from a power outage. • Realized small file size and high video quality by applying the H.264. • Supports terra byte hard disk (up to 1TB ) • Supports E-SATA port to use additional external hard disk.
Before use • Band width setting is automatically set depending on the network speed connected to this device. • Remote alarm notification via e-Mail. • PTZ (Pan/Tilt/Zoom) operation. • Remote control operation • Key board control operation (optional) • Supporting Daylight saving • Simultaneous output to VGA and BNC 11 2 Before use 2-2.
Before use LE6016N model There is no built-in DVD recorder at LE6016N model. b c d 2 Before use f g a DVD Recorder: This is used for DVD backup. b LED c • Hard disk LED: This is turned on HDD is accessed. • Power LED: This is turned on when the power is turned on. • Network LED: This is turned on when network is connected. • Alarm LED: This is turned on when alarm event occurs. Navigation buttons • At power off status, it is turned on by pressing “OK” button in some seconds.
Before use 13 2-4. Rear side a b c d 2 g h i j k a Main output port: It is used to connect BNC type monitor. (It outputs the same video as MAIN output.) b Camera video input: These are used to connect cameras. c External HDD port: It is used to connect E-SATA HDD. d Sensor/Alarm/RS-485 ports - These are used to connect sensor, alarm and RS-485 serial communication port. e USB port: It is used to connect the USB external device.
Before use 2-5. Remote Controller a b c 2 Before use d f h No. Function a Power This is used to turn on/off the power. Description b Emergency recording This is used to start/stop emergency recording. c Number keys This is used to input channel or values. d Plus(+) This is used to increase setting values. e g i e Minus(-) This is used to decrease setting values. f CANCEL This is used to cancel a job.
Before use 15 2-6. Connection and initial setting Caution • The camera or other external devices can be connected to this device in numerous methods. Refer to the user manual of the camera or other external device for addition information on connection methods. • When installing the camera, check whether the power of the camera is turned off. • After installing the monitor, turn on the power of the DVR. Before use Connect the BNC type monitor. (The same video output as VGA.
Before use RS-485 connection ① This device has 1 data port (RS-485). ② Use this port to connect the PTZ camera or the keypad. (Optional) ③ PTZ camera / keyboard connection 2 i. Connect the PTZ serial communication cable to the RS-485 port. Before use ii. When connecting the cable, make sure that the TX- of the device is connected to the RX(TX-) of the camera(keyboard), and TX+ of the device is connected to the RX+(TX+) of the PTZ camera(keyboard). iii.
Before use 17 Sensor (Input) connection Connect one of the signal cables (2 cables) of various sensors (IR sensor, heat ray detector, magnetic etc.) to the COM port and connect the remaining signal cable to the sensor number you want. (Sensor “NC, NO” type can be set from “Setup Ò Event Ò Sensor” menu.
Before use -• Be careful not to cause an impact from the tools and hard disk used for the installation. Protect the hard disk from static electricity. CAUTION This device has elements to cause an electric shock, an accident or a problem to the product. Also the hard disk may not be recognized or operated properly due to incorrect installation and setting. Therefore consult with an experienced expert technician when installing the hard disk.
Before use 19 5. After installing the bracket on the main unit, tighten the screws. 6. Connect the power cable of the hard disk. 7. Connect the SATA cable to the hard disk. 2 Before use 8. Connect the SATA cable to the SATA port of the main board. 9. Close the cover of the main unit. 10. Tighten the screws. 11. After installing the hard disk, you must format the hard disk from the setting menu.
Before use 3. After removing all of power/SATA cable connected to hard disk, please separate hard disk bracket from the body. 4. Loosen the screws on the left and right side of the bracket holding the hard disk. 5. Separate the hard disk from the bracket holding the hard disk. 6. In the reverse order of removing the hard disk, assemble the new hard disk. 7. After replacing the hard disk, turn on the power of the device. 2 8.
Before use 21 Database recovery of the HDD • The system has the check process of the database condition during the system booting. If there is some problem, the system will be displayed the confirmation window to recover the database. • Recovery time of the database is proportional to the amount of data. • Recovery time takes more than 16 times if database recover included event data. • Basically, the recorded data is not damaged because it always make the backup data.
Functional description 3 Functional description 3-1. Operation Start Up 3 1. Turn on this device, then it boots with power indicator light turned on. Functional description 2. After booting it will be displayed as the LOGOUT id. 3. Pressing button, then the login window would be displayed. Select user and press “OK” button to continue. ZZ [USER] You may select user to login and authority is restricted by kind of user. The access rights can be set for each user.
Functional description 23 ZZ [password] The default user and password are set to ‘admin’ and ‘000000’ as shown above. Click password input area, you will see the screen keypad as right. 4. Input password by using virtual keypad on screen. 5. Click “OK” button to execute DVR system and you will see live screen. Shutdown button, then logout window will be displayed as below. ZZ Selection: Select the Log Out or EXIT. ZZ USER : Display current user has logged.
Functional description 3-2. Monitor Screen B A C D 3 Functional description E A [Camera name] • Shows camera name • If you want to modify camera name, you can do so by selecting [Setup] Ò [Camera]Ò [Channel] B [Status icon] (OSD) • Status icon shows current status of camera/recording.
Functional description 25 C [Channel selection] • Selected channel shows green rectangle on the edge of the screen. D [Live view] • It shows current live view as real time. E [System control toolbar] a b c d e f g h i j k l mn o p qr s tu • It shows current connection status of network. (Black : It shows disconnected status.) (Blue : It shows connected status.
Functional description g [Divided screen selection] • 1/4/9/13/16 divided screen can be displayed in live view. h [Auto sequential] • Click • This function does not work at 16 divided screen. • You can set the switching interval at [Setup] Ò [System] Ò [Overview] Ò [Auto- switching]. button and each channel will be switched automatically. i [Logout] • Use Lock menu to change user or lock system operation.
Functional description 27 3 You can see the log of previous date or next date by using a/d button. • You can see the previous or next log list by using ( - ) / ( + ) button. • Click “OK” button to close window. • Clicking button at search mode, Event search dialog box will be shown. Refer to “Event search”. r [Information] • It shows the system information. s [Playback status] • It shows the playback status. t [Bookmark] • You can add playback position (date/time) to access immediately later.
Functional description 3-3. System Setting System setting can be configured by setup menu. Working condition can be specified by front button / mouse / remote controller. Only admin user can setup system configuration by menu. System A 3 Functional description B C D E A [Overview] • You can specify the system configuration by this menu. • Use a / d button to change configuration.
Functional description 29 ZZ REMOTE ID: ID can be selected from 00 to 99. ZZ DE-INTERLACE: Enable or disable de-interlace feature for playback screen. De-interlace feature is only available for ‘D1’ resolution. ZZ AUTO SWITCHING : Set dwell time when auto switching function is working. (1 Sec ~ 30 Sec) ZZ SPOT-DIVISION: Set the division mode for SPOU OUT screen. ZZ SPOT-OUT : Select spot channel. (channel 1~16, AUTO). If you select “AUTO”, Spot will be changed sequentially.
Functional description ZZ LOCALE : Specify locale of country. If you click button, the time zone dialog box will be shown as below, and select a time zone, then click OK to change setting. 3 Functional description ZZ NTP SERVER : It is used to set internet time server. ø Daylight saving time is applied automatically according to corresponding location. C [Password] • You can specify password and authority of each user. • The password can be set max 20 digits.
Functional description 31 ø If you access as Admin account, previous password is not required. ø No authority setting is available for Admin account. ø Only camera authority is allowed for Logout account. ø Logout screen setting is applied as the same for Spot-Out. ø White screen will be shown for the cameras which are not set the authority. D [Initialize] • You can initialize data and configuration by this menu.
Functional description NOTE • If data is initialized, it can’t be recovered. Before use “initialize”, important data must be backup. • HDD Factory initialization makes format HDD and you will loose recorded data E [Controller] • Connect keyboard controller to DVR system. • Setup configuration to access DVR with keyboard controller.
Functional description 33 Camera On the camera menu, channel, recording, schedule, color and PTZ can be configured. A B C D E • You can specify channel name and audio for each camera. ZZ CAMERA : Select camera to change ZZ CHANNEL NAME : Input channel name (Max 8 digits) ZZ AUDIO : Specify channel that audio is related.
Functional description B [Recording] • You can specify recording configuration. 3 Functional description ZZ TOTAL FRAME : Max frame rate has restricted by screen resolution. ZZ CAMERA : Select camera to set frame and quality. ZZ RESOLUTION : Specify screen resolution. (CIF / HALF D1 / D1 ) ZZ FRAME : You can specify recording frame rate when recording method is continuous for selected camera. ø Frame rate cannot exceed event frame rate.
Functional description 35 C [Schedule] • You can specify recording method by schedule with date and time. 3 ZZ Click channel number to change recording method for all time. ZZ Click time label to change recording method for all channel. ZZ Click “COPY” button to copy the settings for applying the current settings to the other channel(s).
Functional description -- You can select month and day by clicking date button. -- Click the Add button, the selected month and day will be added to the list of holidays. -- Click the Delete button to delete the selected date from list. D [Color] • You can adjust brightness, contrast, saturation and hue. 3 Functional description E [PTZ] • This is to setup the PTZ configuration. ZZ CAMERA : select camera to setup PTZ. ZZ DEVICE NAME : Select camera name.(Max 15 cameras supported) 1.
Functional description 37 5. HSDN251 / Honeywell Co.,Ltd 6. MD200 / 2000 / 1200 / 800 / Sony Co.,Ltd 7. New Born / NEW BORN HIGHTECH 8. WVCS850 / Panasonic 9. PELCO-D / PELCO Co.,Ltd 10. PELCO-P / PELCO Co.,Ltd 11. SAMSUNG_E / SAMSUNG Co.,Ltd 12. SPD-2300 / 3000 / 3300 / SAMSUNG Co.,Ltd 13. SUNGJIN / SUNGJIN Co.,Ltd 14. TPD7720 / DYNACOLOR,INC 15. V1305R-DC / V1300RB / CRX - 1013 / VICON ZZ DEVICE ID : Select ID that configured in camera.
Functional description Event You can specify the processing when event occurs like sensor, motion detection, video loss, and the email notification settings when event occurs. A B C D 3 Functional description A [Sensor] • You can specify the processing when event occurs from input device. ZZ SENSOR : Selecting sensor number. ( 1 ~ 8 ) ZZ TYPE : Setting NO / NC type. • NO (Normal Open) : The type of input device is opened normally.
Functional description 39 ZZ CHANNEL : Selecting associated channel with the sensor input. (OFF/1~16) ZZ ALARM : Setting alarm out when event occurs from input device.(OFF/1~4) ZZ ALERT : Setting sound a buzzer when event occurs from input device. (ON/OFF) ZZ SPOT-OUT : Setting spot out when event occurs from input device.(ON/OFF) ZZ DURATION : Setting the duration time from event occurs. ( 1~10 Sec., OFF) B [Motion detection] • You can specify the process when motion is detected.
Functional description >> SELECT ALL : Selecting entire area. 3 Functional description >> UNSELECT ALL : Unselecting entire area. >> SAVE : Saving selected area as a motion detection zone. >> EXIT : Exiting motion zone setting. ZZ SENSITIVITY : Setting the motion sensitivity. (1 to 10) ZZ ALARM : Setting alarm out when motion is detected. ZZ ALERT : Setting sound a buzzer when motion is detected. ZZ SPOT-OUT : Setting spot out when motion is detected.
Functional description 41 ZZ ALERT : Setting sound a buzzer when video loss. (ON/OFF) ZZ DURATION : Setting duration time from video loss. (OFF/1~10 Sec.) D [E-mail] • You can set the E-mail notification when event occurs. 3 ZZ SMTP SERVER : Setting the IP address or domain name of SMTP server. ZZ PORT : Setting the TCP port number of SMTP (Default value is 25). ZZ ACCOUNT : Setting the E-mail account registered in SMPT server. ZZ PASSWORD : Setting the password of the E-mail account.
Functional description Network You can set the network environments. A B C D 3 Functional description E A [TCP/IP] • You can specify the TCP/IP setting according to network environment. • Specifying the TCP port number of Web, Playback and Live. • Default values: Web(80), Playback(9091), Live(9092) For dynamic IP or PPPoE • All the items of IP address, subnet mask, gateway and DNS are disabled and set each value automatically.
Functional description 43 For static IP ZZ IP ADDRESS : Enter IP address received from ISP using screen keyboard. ZZ SUBNET MASK : Enter subnet mask received from ISP using screen keyboard. ZZ GATEWAY : Enter gateway received from ISP using screen keyboard. ZZ DNS : Enter the DNS IP address received from ISP using screen keyboard. ZZ MAC ADDRESS : This is hardware specific unique address of network device, so user cannot set this value. ø 8000~65535 port number is recommended.
Functional description C [DDNS] • You can use DDNS service provided by LG. • You can connect to DVR easily using host name instead of IP address with LG DDNS 3 Functional description ZZ MODE : Enabling or disabling DDNS. ZZ SERVER : IP address of DDNS. ZZ PORT : TCP port number of DDNS. ZZ DOMAIN : The domain name of DVR device. ZZ INTERVAL : Setting the interval of IP address updating. D [CMS] • Specifying IP address and TCP port number of CMS.
Functional description 45 ZZ PORT : The TCP port number of the central monitoring center. ø 8000~65535 port number is recommended. ø Do not use the same port number with each other. web(80), playback(9091), live(9092), CMS LG(9100) E [Event filter] • Specifying the event which will be sent to the central monitoring center and E-mail. 3 ZZ SHUTDOWN : Enabling or disabling the system shutdown event. ZZ SETTING CHANGE : Enabling or disabling the setting change event.
Functional description Information You can view the general system information and run software update. A B C D 3 Functional description A [System information] • You can view the system information. ZZ MODEL : Model name of the device. ZZ IP ADDRESS : The IP address assigned to the device. ZZ MAC ADDRESS : The MAC address assigned to the device. ZZ F/W VERSION : The version number of firmware. ZZ OS VERSION : The version number of Operating system.
Functional description 47 ZZ VIDEO TYPE : Showing NTSC or PAL. This is set automatically by detecting incoming video signal, so user cannot change this value. ZZ HDD: HDD capacity, using ratio and status. -- * mark is shown at the HDD which is currently recording. -- “NOT HEALTHY” is shown according to the HDD status. -- The HDD connected to E-SATA port is displayed as “External HDD”. B [System log] • You can view the system log.
Functional description D [Setting update] 3 Functional description ZZ IMPORT: You can replace current setting values with new values from USB memory. (ENABLE/DISABLE) ZZ EXPORT: You can export current setting values to USB memory. (ENABLE/DISABLE) NOTE USB memory stick is needed to update F/W or settings. It takes about 5 seconds to recognize USB memory device after connected. “USB is not detected.” Message will be shown when you are to run backup without connected USB.
Functional description 49 3-4. PTZ Control It is used to control PTZ camera which is connected at RS-485 port. Settings of camera and DVR should be done if you are to control PTZ camera. 1. Click the icon to control PTZ. 2. Control the PTZ camera using each item below. a b c d 3 f g h i j k l m n o a Click to move the PTZ control window. b Click this button to close the PTZ control window. c Click this spin control to select PTZ camera.
Functional description h Click to control the focus of camera manually. i Click to control the iris of camera manually. j Click to select preset number. k Click to move to selected preset position. l Click to set current position as a new preset position. m Click to delete specified preset number. n Click to start touring, which function traverse each preset position one by one according to dwell time. o Click to stop touring. 3 ZZ Setting a new preset position Functional description 1.
Functional description 51 NOTE • The tour which is working will be stop after the setting is changed. • If you control the Camera OSD by using the SAMSUNG E protocol to select the exit(X) menu, the DVR may not opreate normally. In this case, you can recover the system as input the Zoom +/- key after input O key of the OSD. 3-5. Search (Playback) & Backup Various features are available for user to search recorded data easily. You can search recorded data with date and time. ZZ Search method A.
3 Functional description Functional description ø Click the “CANCEL” button to select date again. ø You can select a data if data are duplicated at the same time stamp using spin box below. The spin box is shown only when data are duplicated at the same time stamp, which is caused when daylight saving period. ø Bigger number of duplicated data stands for more recent data. Event Search You can search recorded data using event occurrence time. A.
Functional description 53 E. Select a data to search from the list. Click the mouse button to move to the corresponding recorded data. F. Click “PLAY” button and the searched data will be played. Bookmark You can access the bookmarked time directly without going through the search. 3 1. Use the time search and place you want to add a bookmark. 2. Click mouse on the icon. 3. If you want to add the current selected time, click Add button. Bookmarks can be added up to 100. ZZ SEARCH 1.
Functional description Backup You can back up the recorded data which you select date/time and channels. 3 Functional description A. Click mouse on the icon of the menu bar which is located in the lower position of the screen. B. Select a device to backup data will be stored. Only USB-STICK is available for LE6016N. USB-STICK, CD-RW, or DVD-RW can be used for LE6016D. C. Select media type. If you select FILESYSTEM, backup data will be stored as native format with backup player.
Functional description 55 L. The message “BACKUP STOP” will be shown when backup is finished. • You can backup automatically daily based by schedule backup. 3 B. Enter the time to execute backup at “BACKUP TIME”. If USB memory stick is not connected nor has no free space, backup cannot be executed. C. Enter start time of backup period at “START BACKUP”. Check “USING A PREVIOUS DATE” if needed. D. Enter end time of backup period at “END BACKUP”. Check “USING A PREVIOUS DATE” if needed. E.
Functional description How to cancel backup If you press ÄÄ button when backup is running, the selection message will be shown as below. Click “OK” button to cancel backup. ÄÄ 3 Functional description MEDIA ERASE You can erase data in the storage media, like USB memory stick, CD-RW or DVD-RW. ÄÄ When you are to use USB memory stick, after connecting USB storage to USB port ÄÄ of front side, click “MEDIA ERASE” button to erase data.
Functional description 57 ø Bigger number of duplicated data stands for more recent data. NOTE Do not remove the external USB device when backup is running. • Backup data playback The backup data in USB storage or CD/DVD media can be played at PC. 3 Functional description A. The backup player software will run automatically when you insert the media containing backup data at the PC.
Web viewer 4 Web viewer 4-1. Installation Set up the network before the installation. Web viewer installation 1. Enter the LG DVR IP address in the Web address window, and then the following Active X installation window will be displayed. 4 Web viewer 2. When you click on the Active X install button, the following window will be displayed. Press the Install button.
Web viewer 59 3. Press the Next button from the Web View installation window. When the installation is completed, the Web initialization screen will be displayed. (General installation recommended) 4 NOTE Web Viewer and CMS LG cannot be used at the same time. Web viewer 4. Enter the ID and password. (Multi-login is not enabled for admin user ID.
Web viewer 4-2. Functional description Web viewer monitoring window A B C D E F I G H J K 4 Web viewer L M N A Divide screen division (Full screen/1/4/9/16) B Selecting a camera C Real time image capture (Save as JPEG) D Settings (It is available only when you logged in as admin) E Enable or disable incoming audio (Default value is disable.
Web viewer 61 Web viewer search window A B C D E I H F G J 4 A B C D E F G H I J K L Divide screen division (Full screen/1/4/9/16) Selecting a camera Saving video or still image (Saving as AVI/JPEG/BMP) Date/Time selection button to play back (Refer to “Search dialog box”) Enable or disable incoming audio (Default value is disabled.
Web viewer Search dialog box A B E C D F H 4 G Web viewer A Recorded data graph (Click on the data graph to select time to play.) B Time scroll bar C Zoon in/out of graph (It can be scaled from 2 hours to 24 hours by minute unit.) D Displaying selected data/time E Displaying calendar (The dates are shown in bold if recorded data exist.
Web viewer 63 Saving as AVI file dialog box A B C D E F H G I A Camera name/Date/Time which is currently displayed. B Starting AVI saving (File name is requested when you click on this button.) C Stopping AVI saving D Closing Save as AVI dialog box (It will be closed automatically after stopping AVI file if it is being saved.) E Specifying time period to save AVI file. F Starting time to save AVI file. G Stopping time to save AVI file.
Apple iPhone/iPod 5 Apple iPhone/iPod 5-1. Functional description Real-time monitoring If you can use Wi-Fi environments, you can view the real-time monitoring video from DVR with iPhone/iPod. 1. Run web browser at iPhone/iPod, and enter LG DVR IP address. 5 Apple iPhone/iPod 2. Enter id and password, and click “login” button the real-time monitoring screen will be shown.
Apple iPhone/iPod 65 3. Real-time monitoring screen.
Reference 6 Reference 6-1. Check before requesting for service If the following symptoms are observed when using the product, recheck the following. It may not be a problem. Symptom Checkpoint and resolution Check whether the power plug is correctly plugged. I cannot turn on the power of the device Check whether the voltage of the power supply is correct.
Reference Symptom 67 Checkpoint and resolution Check the recording setting from the recording setting menu. Video of camera is displayed on the screen but I cannot record the video through the device Check whether the hard disk is recognized from the system information window. If the hard disk is not recognized normally, check the format and connected condition of the hard disk. Check the available space on the hard disk. During the search, check whether the video data currently being recorded exists.
Reference Symptom Checkpoint and resolution If there is an issue with the camera connected to the system, connect a different camera to the video input port to check whether the existing camera connected to the system has an issue. Check whether the video cable connecting the device and the camera is damaged. There is noise in the video. Check whether there is a cable with high voltage near the video cable. It can cause noise in the video or cause deterioration in the video quality.
Reference Symptom 69 Checkpoint and resolution When the E-mail transmission fails without SMTP server setting. I cannot receive the E-mail sent from the device. • Check whether the network is set up correctly. • Check whether the E-mail address is entered correctly. • Check the spam mail setting for the entered E-mail address. (If the spam mail is set, some mails may automatically be deleted or classified into spam mail box etc.
Reference 6-2.
Reference 71 Recommended list of CD/DVD media Manufacturer CD-R CD-RW DVD+R DVD-R DVD+RW DVD-RW LG O O - O - - Samsung Pleomax O O O O O - Melody O O O O O - Sony O - O O - - MITSUBISHI O O O O - O Verbatim O O O O O - Memorex - O O O O O NOTE Dual layer and mini CD/DVD is not supported in the recommended list of CD/DVD media.
Reference List of supported PTZ camera Protocol 6 Reference Manufacturer Pan/Tilt Zoom Focus Iris Preset Tour LG Multix_E LG X O O O X X LG Multix LG O O O O O O LPT-A100L LG O X X X X X LVC-C100/200HM/LG Electric Inc LG X O O O X X HSDN251 / Honeywell Co., Ltd Honeywell O O O O O O MD200/2000/1200/800/ Sony Co.
Reference 73 6-3. Initial setting list for factory default 1 Step 2 Step SYSTEM OVERVIEW 3 Step 4 Step INPUT Default REMOTE ID 00~99 00 DE-INTERLACE ON / OFF ON AUTO-SWITCHING 1~30 Sec 10 Sec SPOTDIVISION 1 / 4 / 16 1 SPOT-OUT AUTO/1~16 1 BUTTON BUZZER ON/OFF ON LANGUAGE ENGLISH OVERWRITE ON / OFF ON USE DATA RETAIN ON/OFF ON RETAIN DAY 1 ~ 60 Days 30 Days DATE - TIME - LOCALE - DATE/TIME 6 OFF Reference NTP SERVER OFF Time.nuri.net Time.kriss.re.kr ntp.tmc.
Reference SELECTION PASSWORD INITIALIZE CONTROLLER 6 CAMERA Reference CHANNEL admin/user1/user2/ user3 admin OLD - NEW - CONFIRM - CAMERA SET 1~16 1~16 SETUP O/X X SEARCH / BACKUP O/X O PTZ O/X O AUTO LOGOUT Off, 5 Min to 60 Min Off FACTORY ON/OFF OFF LOG ON/OFF OFF SETTING ON/OFF OFF HDD ON/OFF OFF USE ON/OFF OFF DEVICE ID 1~16 1 BAUD RATE 1200~115200 9600 CAMERA 1~16 1 CHANNEL NAME CH 01 CAMERA1 AUDIO 1~4 CAMERA1~16 NOT USED NOT USED
Reference RECORDING SCHEDULE CAMERA 1~16 1 RESOLUTION CIF/ HALF D1/ D1 CIF FRAME 1~30 30 EVENT FRAME OFF / 1 / 5 / 7.
Reference CAMERA 1~16 1 DEVICE NAME LG-Multix_E LG-Multix LPT-A100L LVC-C100 HSDN251 MD200 New Born WVCS850 PELCO-D PELCO-P SAMSUNG_E SPD-2300 SUNGJIN TPD7720 V1305R-DC OFF OFF PTZ DEVICE ID EVENT 6 Reference SENSOR 0 BAUD RATE 1200~115200 9600 TOURING INTERVAL 5 Sec 10 Sec 20 Sec 30 Sec 1 Min 3 Min 5 Min 1Min SENSOR 1~8 1 TYPE N.O/N.C N.O CHANNEL 1~16/OFF 1 ALARM 1~4/OFF OFF ALERT ON/OFF OFF SPOT-OUT ON/OFF OFF DURATION 1~10 Sec./OFF 10 Sec.
Reference CHANNEL 1~16 MOTION ZONE MOTION VIDEO LOSS 1 SELECT ALL SENSITIVITY 1 ~ 10 5 ALARM 1~4/OFF OFF ALERT ON/OFF OFF SPOT-OUT ON/OFF OFF DURATION 1~10 Sec./OFF 10 Sec. CHANNEL 1~16 1 ALARM 1~4/OFF OFF ALERT ON/OFF OFF DURATION 1~10 Sec./OFF 10 Sec.
Reference NETWORK DHCP IP STATIC IP PPPoE CONFIG TCP / IP IP ADDRESS - SUBNET MASK - GATEWAY - DNS - MAC ADDRESS STATUS PPPoE DISCONNECT USER PASSWORD Reference DDNS CMS - WEB 80 PLAYBACK 9091 LIVE 9092 CAMERA 1~16 FRAME OFF / 1 / 5 / 7.5 QUALITY VERY LOW LOW NORMAL HIGH VERY HIGH NORMAL MODE ON/OFF OFF STREAMING 6 DHCP IP SERVER www.lgddns.
Reference EVENT FILTER INFO INFORMATION SYSTEM START ON/OFF OFF SHUTDOWN ON/OFF OFF SETTING CHANGE ON/OFF OFF LOGIN/ LOGOUT ON/OFF OFF SENSOR DETECTION ON/OFF OFF MOTION DETECTION ON/OFF OFF VIDEO LOSS ON/OFF OFF ALARM OUTPUT ON/OFF OFF MODEL - IP ADDRESS - MAC ADDRESS - F/W VERSION - OS VERSION - VIDEO TYPE - 79 INTERNAL HDD EXTERNAL HDD - F / W UPDATE FILE NOT EXISTED IMPORT SET UPDATE EXPORT REFRESH DESABLE/ENABLE DESABLE - 6 Reference SYSTEM LOG
Reference 6-4. Product specification MODEL LE6016N OPERATING SYSTEM Embedded Linux COMPRESSION H.