Owner's Manual
14 Before use
Before use
2
2-5. Remote Controller
a
d
f
h
l
n
b
c
e
g
i
j
k
m
o
No. Function Description
a
Power This is used to turn on/o the power.
b
Emergency
recording
This is used to start/stop emergency
recording.
c
Number keys This is used to input channel or values.
d
Plus(+) This is used to increase setting values.
e
Minus(-) This is used to decrease setting values.
f
CANCEL This is used to cancel a job.
g
LIVE This is used to display real time screen.
h
MENU This is used to display menu.
i
SEARCH This is used to display screen search.
j wsad
, OK
This is used to navigate each menu
item.
k
Play buttons
These are used to control playback
(Backward or forward search, play and
pause)
ø
and buttons have no
function.
l
PTZ Menu This is used to open PTZ Menu.
m
Export backup
This is used to run backup.
ø
It can be run in search mode.
n
Split screen This is used for split screen display.
o
Auto switching
This is used to display channel one by
one.
ø
It works as event search at search
mode.
Reference: The shape of remote controller can be dierent by the model.
How to set the id of remote controller
1. Press CANCEL button about 3 seconds then light of power button turns on.
2. Enter two digit numbers which is the id of remote controller using number keys.
ø
You have to input ‘0’ rst when you are to input one digit number.
Ex) In case you want to use ‘2’ as ID, input ‘02’.
3. Every time you press the number key the light of power button will blink.
4. Stopping blinking means that the id is saved.