Owner's Manual
67Reference
Reference
6
Symptom Checkpoint and resolution
Video of camera is displayed
on the screen but I cannot
record the video through the
device
Check the recording setting from the recording setting menu.
Check whether the hard disk is recognized from the system
information window.
If the hard disk is not recognized normally, check the format and
connected condition of the hard disk.
Check the available space on the hard disk.
I cannot search the recorded
video.
During the search, check whether the video data currently being
recorded exists.
If the video data currently being recorded does not exist, check
the recording setting of the menu.
Check whether the hard disk is recognized from the system
information window.
If the hard disk is not recognized normally, check the format and
connected condition of the hard disk.
I cannot hear the audio
recorded with the video.
Check whether the recording audio channel is correctly set up.
Check whether the connecter on the rear side of the device is
connected with external device (Line input) correctly.
Check whether the connected external device is operating
correctly.
Screen colors of some
cameras are incorrect or
the video is displayed in
abnormal way.
If there is an object in the camera connected to the system,
connect the camera to the video input port to check the
video and check if there is any issue with the existing cameras
connected to the system.
Check whether the video format of the device is the same as
that of the camera.
The video format can dier by the region into PAL or NTSC
format. IF the video format of the device is not the same as that
of the camera, the video may not be recognized.