Owner's Manual

Connections
PREPARATION
13
Connecting
to
Optional Equipment
[Connecting
to an
amplifier equipped
with two
channel
digital
stereo
(PCM)
or to an Audio/
Video receiver
equipped
with a multi-channel
decoder
(Dolby DigitalTM,
MPEG
2
or
DTS)
Connect the OPTICAL OUT
jack
on the unit to the
OPTICAL IN
jack
on
your amplifier.
Use an
optional
audio cable.
Caution:
Due to the DTS
Licensing agreement,
the
digital output
will be in DTS
digital
out when DTS audio stream is
selected.
The sound is muted
during playback
on an audio CD
recorded in dts.
Notes
--
If the audio format of the
digital output
does not
match the
capabilities
of
your
unit,
the DVD Karaoke
will
produce
a
strong,
distorted sound or no sound at
all.
--
Six Channel
Digital
Surround Sound via
digital
con-
nection can
only
be obtained if
your
unit is
equipped
with a
Digital
Multi-channel decoder.
--To see the audio format of the current unit in the On-
Screen
Display, press
AUDIO.
Connecting
to
Auxiliary Equipment
You can use VCR or other unit connected to the
AUX1,
AUX2 connector.
VIDEO
OUT IN
AUDIO
(L)
AUDIO
(R)
VIDEO
OUT IN
AUDIO
(L)
AUDIO
(R)
VCR
(or Auxiliary
Device,
etc)
Additional VCR
(or Auxiliary
Device,
etc)
To AUDIO IN
To AUDIO OUT
To AUDIO/
VIDEO IN
To AUDIO/
VIDEO OUT
To AUDIO/
VIDEO IN
To AUDIO/
VIDEO OUT
1
Connect a VCR or
auxiliary
device,
etc to the AUX
1 connector.
2
Connect a additional VCR or
auxiliary
device,
etc
to the AUX 2 connector.
3
Select AUX1 or AUX2
pressing
the AUX button on
the Tuner/
Amplifier
or the AUX1/2 button on the
remote control.