LF-D5933A.JA3ULLS(ENG)_32M DVD MINI HOME THEATER SYSTEM OWNER’S MANUAL MODEL : LF-D5933 LF-D5933A/X, LF-DP5933, LFS-D5933V, LFS-D5933C, LFS-D5933T R Please read this manual carefully before operating your set. Retain it for future reference. Designs and specifications are subject to change without notice for improvement.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Introduction Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before Use Playable Discs ote on DTS-encoded CDs When playing DTS-encoded CDs, excessive audio level may be heard from the analog stereo output. To avoid possible damage to the audio system, turn down the volume before playing back such discs, adjust the volume gradually, and keep the volume level low. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the unit.
Before Use (Cont’d) Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc. Storing discs After playing, store the disc in its case.
Front Panel Cassette tape player/ DVD/VCD/CD player 17 1 2 16 3 4 Tuner/ Amplifier 15 14 5 6 7 13 8 12 9 11 10 1. DISPLAY WINDOW 7. ECHO VOLUME KNOB (ECHO VOL.) 2. • PLAY MODE/ REPEAT buttons 8. MULTI JOG DIAL • CD SKIP (./>) • MANUAL TUNING • CD SEARCH (FF/GG) buttons • CD STOP (xSTOP)/ CD PLAY (G) buttons 3. 4. • CLOCK ADJUST • CD PAUSE ([])/ PROGRAM button Z PUSH EJECT position (TAPE 1) TAPE FUNCTION buttons 9. • COUNTER RESET (COUNT. RESET) button 11.
. Rear Panel INTRODUCTION Cassette tape player/ DVD/VCD/CD player 1 15 14 13 2 12 3 Tuner/ Amplifier 11 10 4 9 5 8 6 7 1. LUG Connector 8. 2. COMPONENT VIDEO OUT/ PROGRESSIVE SCAN (Y Pb Pr) Connector 9. 3. MONITOR OUT Connector 10. LUG Connector 4. • VIDEO INPUT/OUTPUT 11. ANTENNA Connector • AUX 1 INPUT (L/R) 12. SYSTEM Connector • AUX 2 INPUT/OUTPUT (L/R) SPEAKER Connector SYSTEM Connector (SYSTEM JACK1/ SYSTEM JACK2) (SYSTEM JACK1/ SYSTEM JACK2) • SUB WOOFER OUTPUT 13.
Remote Control POWER MUTE 20 1 TUNER/BAND AUX1/2 DVD/CD 1. 2. 3. 4. 2 PRESET 19 3 5. 4 1 - TAPE - 2 6. SET UP DISPLAY 18 5 6 7. 8. SELECT /ENTER 7 8 9 MENU TITLE 17 PROGRAM SCAN REPEAT SLOW REPEAT A-B SKIP 16 10 STOP PAUSE/STEP PLAY D.SKIP EQ OAO SURR. XDSS SOUND AUDIO S-TITLE RETURN CLEAR ZOOM MARKER SEARCH DIMMER SLEEP SPECTRUM 11 12 9. 10. 11. 12. 13. 14. 15 14 15. 16. 17. 18.
Display Window TITLE 1 2 2 PROG. CHP/TRK AUTO MEMORY SLEEP MONO MHZ kHZ 3 CD 1 MP3 VCD DOWNMIX REPEAT 1 DISC TIMER • TITLE indicator 3. • PROGRAM (PROG.) indicator CONT • DOWNMIX indicator • REPEAT indicator • CHAPTER/ TRACK indicator 4. • TIMER indicator • AUTO SEARCH indicator • RECORD/ RECORD PAUSE indicator • MEMORY indicator • CD SYNCHRO RECORDING indicator • FM STEREO RECEIVING indicator • DUBBING indicator • SLEEP indicator 2. REC CD SYNC. HI-SP. DUBB 2 4 3 1.
Connections Fitting the system connection cables • Your unit consists of two separate parts, Cassette tape player/DVD/VCD/CD player and an integrated Tuner/ Amplifier. • Before you can use your unit, the separate parts must be connected with the supplied system connection cables. • Make sure that all connections are made with your unit unplugged from the mains supply. Cassette tape player/ DVD/VCD/CD player Tuner/ Amplifier 1 Stack the parts of your unit in the order shown above.
Connections Connecting to a TV " " Make one of the following connections, depending on the capabilities of your existing equipment. ips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. Use one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution – Make sure the unit is connected directly to the TV.
Connections Connecting to Antenna Connect the supplied FM/AM antennas for listening to the radio. - Connect the AM loop antenna to the AM antenna connector. - Connect the FM wire antenna to the FM antenna connector. otes To prevent noise pickup, keep the AM loop antenna away from the unit and other component. Be sure to fully extend the FM wire antenna. After connecting the FM wire antenna, keep it as horizontal as possible.
Connections Connecting to Auxiliary Equipment Connecting to Optional Equipment PREPARATION You can use VCR or other unit connected to the AUX1, AUX2 connector.
Connections Speaker System Connection Connect the speakers using the supplied speaker cords by matching the colors of the terminals and those of the cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.). If you feel lack of bass frequency Connect an active sub woofer to the SUB WOOFER OUT connector using a monaural audio cord (not supplied). otes " Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –.
Connections In the case of normal position use the 6 speakers (2 front speakers, center speaker, 2 rear speakers and subwoofer). If you want to play the excellent bass sound or Dolby Digital surround, you should connect a subwoofer. • Front speakers According to your listening position set up the speakers for equal distance. And by hearing position set up the interval between speakers to 45 degree. • Center speaker It is ideal that the center speakers and front speakers are same height.
Before Operation Volume Adjustment SURROUND • Turn VOLUME knob clockwise to increase the sound level, or counterclockwise to decrease it. • Press VOLUME + to increase the sound level, or use VOLUME - to decrease it on the remote control. To activate surround mode • You can choose between 6 fixed sound impressions. • Select a desired surround mode by using the SURROUND button on the front panel or the SURR. button on the display window. • Each you press the button the indication changes as follows.
Setting the Clock Using Microphone 1 You can sing to a music source by connecting a microphone to the unit. Press CLOCK. (If the clock requires setting, press and hold CLOCK for more than 2 seconds.) - The hours display begins to blink. 2 cycle by turning MULTI JOG DIAL. . Select either the 12 hour cycle or the 24 hour (12HR) or (24HR) 3 Use MULTI JOG DIAL to set the current hour. 4 Press SET. 5 . Use MULTI JOG DIAL to set current minutes.
Before Operation Timer Function With the TIMER function you can have the radio reception and recording, CD or tape playing turned on and off at the time desired. 1 Press CLOCK to check the current time. For your reference If you don’t set clock, timer function doesn’t work. flash in the display window in 2 TUNER-CD-TAPE turn. Press TIMER to enter the timer setting mode. For your reference If you want to correct the previous memorized TIMER setting, press and hold the TIMER button more than 2 seconds.
Before Operation Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.
Before Operation Caution: Before using the remote control, press the DVD/CD button to select the device to be operated. or to change the setting of an item. 3 Press The number buttons can be also be used for setting numbers (e.g., title number). For some functions, press SELECT/ENTER to execute the setting. General Explanation This manual gives basic instructions for operating the unit. Some DVDs require specific operation or allow only limited operation during playback.
Before Operation LANGUAGE By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 21 to 25. To display and exit the Menu: Press SETUP to display the menu. A second press of SETUP will take you back to initial screen. To go to the next level: Press on the remote control. To go back to the previous level: Press on the remote control.
Before Operation DISPLAY Progressive Scan DISPLAY TV Aspect Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
Before Operation AUDIO 5.1 Speaker Setup Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use. Select speaker settings, including volume balance and distance, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. Dolby Digital Bitstream DTS Bitstream MPEG PCM Sample Freq. 48 kHz 5.
Before Operation Volume Press / to adjust the output level of the selected speaker. (-5dB ~ 5dB) Distance If you have connected speakers to your DVD Player, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time. Press / to adjust the Distance of the selected speaker (Center, Rear L and Rear R). Test Select “All” to test the signals of each speaker.
Before Operation Password (Security Code) LOCK (Parental Control) Rating Unlock Password **** Country Code AE Move 1 Select Password on the LOCK menu then press . 2 Follow step 2 as shown left (Rating). “Change” or “New” is highlighted. 3 Enter the new 4-digit code, then press SELECT/ENTER. Input it again to verify. 4 Press SETUP to exit the menu. Select If you forget your Security Code Rating DVD Some movies contain scenes that may not be suitable for children to view.
Operation with RADIO Presetting the radio stations Listening to the radio You can preset 50 stations for FM and AM. Before tuning, make sure that you have turned the volume down to the minimum level. 1 1 Press TUNER/BAND to show either FM or AM in the display window. Every time you press this button, AM and FM changes alternately. control) repeatedly to select the 2 remote preset station you want. 2 Turn the MULTI JOG DIAL on the front panel until the frequency indication starts to change.
Basic Playback To Stop Play 1 Open cassette TAPE1-2 by pushing to the 2 PUSH EJECT position. one or two cassettes with the tape side to 3 Insert the bottom and then close the TAPE 1 (and/or 2) Press STOP( ) on the front panel or TAPE STOP( ) on the remote control during playback. Press TAPE1-2 to select tape function. (“NO TAPE ” appears in the display window.) door. 4 Press G (or F: OPTIONAL).
Operation with DVD and Video CD Playing a DVD and Video CD Playback Setup " " Turn on the TV and select the video input source connected to the unit. Audio system: Turn on the audio system and select the input source connected to the unit. Z OPEN/CLOSE button to open the disc 1 Press tray. your chosen disc in the tray, with the 2 Load playback side facing down. General Features ote Unless stated otherwise, all operations described use the remote control.
Operation with DVD and Video CD Still Picture and Frame-by-frame playback DVD VCD 1 Press PAUSE/STEP on the remote control during playback. The player will now go into PAUSE mode. 2 You can advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control. 3 To exit still motion mode, press PLAY. Slow Motion DVD VCD 1 Press PAUSE/STEP on the remote control during playback. The player will enter SLOW mode.
Operation with DVD and Video CD General Features (continued) Special DVD Features Zoom Checking the contents of DVD Video discs: Menus DVD VCD The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM during playback or still playback to activate the Zoom function. If you press ZOOM repeatedly, the magnification level increases up to four steps.
Playing an Audio CD and MP3/WMA Disc CD MP3 WMA The unit can play MP3/WMA formatted recordings on CD-ROM, CD-R, or CD-RW discs. Audio CD Once you insert an audio CD a menu appears on the TV screen. Press / to select a track then press PLAY or SELECT/ENTER and playback starts. 0:00:00 1 / 12 Audio CD Program List Track1 Track2 Track3 Track4 Track5 Track6 Track7 Track8 MP3 / WMA 1. Press / to select a folder, and press SELECT/ENTER to see the folder contents. 2.
Operation with Audio CD and MP3/WMA Disc Pause CD MP3 WMA 1 Press PAUSE/STEP during playback. 2 To return to playback, press PLAY or press PAUSE/STEP again. Moving to another Track " " " CD MP3 WMA Press . or > briefly during playback to go to the next track or to return to the beginning of the current track. Press . twice briefly to step back to the previous track. In case of audio CD, to go directly to any track, enter the track number using the numbered buttons (0-9) during playback.
Operation with JPEG Disc JPEG This unit can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. 1 Insert a disc and close the tray. The JPEG menu appears on the TV screen. Slide Show Use / / / to highlight the then press SELECT/ENTER. (Slide Show) OPERATION Viewing a JPEG disc Moving to another File Press . or > once during viewing a picture to advance to the next file or to the previous file.
Programmed Playback CD MP3 WMA The Program function enables you to store your favorite tracks from any disc in the player memory. A program can contain 300 tracks (Audio CD/MP3/WMA). 1 Insert a disc. Repeat Programmed Tracks Audio CD and MP3/WMA Discs: Audio CD or MP3/WMA menu appears as below.
Operation with DivX Disc 1 Insert the MPEG4 encoded disc and close the tray. The DivX menu appears on the TV screen. 0:00:00 DivX disc compatibility with this player is limited as follows: • Available resolution size of the DivX file is under 720x576 (W x H) pixel. • The file name of the DivX subtitle is available by 20-40 characters (differs from language). 1 / 12 DIVX • If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Cause Symptom Correction No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is on, but the unit does not work. • No disc is inserted. • Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is lit.) No picture. • The TV is not set to receive DVD signal output.
Language Code List Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahil
Country Code List Enter the appropriate code number for the initial setting “Country Code” (See page 25).
Specifications General Power supply Power consumption Refer to the main label. 210W FM Tuning Range Intermediate Frequency Signal to Noise Ratio Frequency Response AM Tuning Range Intermediate Frequency Signal to Noise Ratio Frequency Response Output Power T.H.D Frequency Response Signal-to-noise ratio Mass External dimensions (W x H x D) REFERENCE Tuner/Amplifier 87.5 - 108.0 MHz or 65 -74 MHz, 87.5 -108.0 MHz 10.
P/NO : 3834RH0132M
