Owner's Manual

Connections
10
1
Stack the
parts
of
your
unit
in
the order shown
above.
Position
your
unit so that
you
have
easy
access to
the rear of it.
2
Connect the
SYSTEM
JACK1
on
the Cassette
tape player/DVD/KARAOKE Player
to the
SYSTEM
JACK1 connector
on
the
Tuner/
Amplifier.
3
Connect the
SYSTEM
JACK2 connector
on
the
Cassette
tape player/DVD/KARAOKE Player
player
to the
SYSTEM
JACK2 connector
on
the
tuner/
Amplifier.
4
Connect the LUG cable to the LUG connector
on
the unit with the
supplied
hand screw.
otes
The
system
connection cables will
only
connect and should
'click' into
place,
do not
try
to force them.
If
you
need to
unplug
the
system
connection
cables,
squeeze
both sides of each
plug
before
pulling
it out
-
this
will 'unlock' the
plug
and allow it to be released.
Cassette
tape player/
DVD/KARAOKE
Player
Tuner/
Amplifier
Fitting
the
system
connection cables
?
Your unit consists of two
separate parts,
Cassette
tape player/DVD/KARAOKE player
and an
integrated
Tuner/
Amplifier.
?
Before
you
can use
your
unit,
the
separate parts
must be connected with the
supplied system
connection cables.
?
Make sure that all connections are made with
your
unit
unplugged
from the mains
supply.