Owner's Manual

Before
Operation
16
Volume
Adjustment
?Turn VOLUME knob clockwise to increase the sound
level,
or counterclockwise to decrease it.
?
Press VOLUME + to increase the sound
level,
or use
VOLUME
-
to decrease it on the remote control.
Sound
Quality Adjustment
?To
activate stereo sound
-You can choose between 8 fixed sound
impressions
and 1 USER MODE.
Select a desired sound mode
by using
the
EQ
button on the remote control.
-
Each
you press
the button the indication
changes
as
follows in the
display
window.
USER
→
FLAT
→
POP
→
CLASSIC
→
ROCK
↑
SAMBA
←
JAZZ
←
SALSA
←
VOCAL
-
If
you press
the MUSIC
button,
the indication
changes
as follows in the
display
window.
FLAT
→
POP
→
CLASSIC
→
ROCK
→
VOCAL
-
If
you press
the DANCE
button,
the indication
changes
as follows in the
display
window.
SALSA
→
JAZZ
→
SAMBA
ote
This function is
only
available to the "BYPASS" sound mode.
?
Headphone
Jack
Connect a stereo
headphone plug ( 6.3mm)
into the
headphone jack.
The
speakers
are
automatically
disconnected when
you plug
in the
headphones (not supplied).
MUTE
Press MUTE to turn off the
sound,
press again
to
restore. You can mute
your
unit in
order,
for
example,
to
answer the
telephone,
"MUTE" indicator flashes in the
display
window.
SURROUND
To
activate surround mode
?You can choose between 6 fixed sound
impressions.
?
Select a desired surround mode
by using
the
SURROUND button on the front
panel
or the SURR.
button on the
display
window.
?
Each
you press
the button the indication
changes
as follows.
SURROUND OFF
→
SIMULATED LOW
→
SIMULATED HIGH
↑
MOVIE HIGH
←
MOVIE LOW
←
MUSIC HIGH
←
MUSIC LOW
ote
This function is
only
available to the "BYPASS" sound mode.
XDSS
(Extreme
Dynamic
Sound
System)
Press XDSS button
repeatedly
to reinforce treble and
bass.
XDSS1ON→XDSS2ON →XDSSOFF
ote
This function is
only
available to the "BYPASS" sound mode.
OAO
(Orientation
Acoustic
Optimizer)
ON/OFF
Press OAO to reinforce the bass sound.
The "OAO ON" or "OAO OFF" indicator
lights.
To
cancel,
press
OAO
again.
SPECTRUM Effect
Whenever
you press
the SPECTRUM button on the
remote
control,
you
can
enjoy
the
spectrum change
with
6
types
in the
display.
DIMMER
This function will
change
the
brightness
of the
display
window on the front
panel
in
power-on
status.
Press the DIMMER button on the remote control.
DEMO
Press DEMO in
power
off state to demonstrate the
function in the
display
window.
To cancel
it,
press
POWER or DEMO
again. During
demonstration in
power-on
status
you
can cancel it
by using
the other buttons.