Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- Before Installing
- Choosing the Proper Location
- Removing/Assembling Handles
- Removing/Assembling Doors and Drawers
- Removing the Hinge Cover
- Removing the Left Refrigerator Door
- Removing the Right Refrigerator Door
- Removing the Freezer Drawer
- Removing the Full-Convert Drawer
- Assembling the Freezer Drawer
- Assembling the Full-Convert Drawer
- Assembling the Right Refrigerator Door
- Assembling the Left Refrigerator Door
- Assembling the Hinge Cover
- Connecting Refrigerator to Water Supply
- Leveling and Door Alignment
- Turning on the Power
- OPERATION
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
15INSTALLATION
ENGLISH
3 Rotate the hinge lever i counterclockwise.
Lift the top hinge j free of the hinge lever
latch
k.
CAUTION
• When lifting the hinge free of the latch, be
careful that the door does not fall forward.
4 Lift the door from the middle hinge pin and
remove the door.
CAUTION
• Place the door, inside facing up, on a
nonscratching surface.
Removing the Right Refrigerator
Door
1 Detach all the wire harnesses a. Unscrew the
ground wire b.
NOTE
• The number of wire harnesses may vary
depending on the model.
• Ground wire is only present on some models.
2 Rotate the hinge lever c clockwise. Lift the
top hinge d free of the hinge lever latch e .
CAUTION
• When lifting the hinge free of the latch, be
careful that the door does not fall forward.
3 Lift the door from the middle hinge pin and
remove the door.
CAUTION
• Place the door, inside facing up, on a
nonscratching surface.
Removing the Freezer Drawer
WARNING
• Use two or more people to remove and install
the refrigerator doors and freezer drawer.