Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- Before Installing
- Choosing the Proper Location
- Removing/Assembling Handles
- Removing/Assembling Doors and Drawers
- Removing the Hinge Cover
- Removing the Left Refrigerator Door
- Removing the Right Refrigerator Door
- Removing the Freezer Drawer
- Removing the Full-Convert Drawer
- Assembling the Freezer Drawer
- Assembling the Full-Convert Drawer
- Assembling the Right Refrigerator Door
- Assembling the Left Refrigerator Door
- Assembling the Hinge Cover
- Connecting Refrigerator to Water Supply
- Leveling and Door Alignment
- Turning on the Power
- OPERATION
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
26 OPERATION
Press the Ice Plus button to illuminate the indicator and activate the function for 24 hours. The function
automatically shuts off after 24 hours. Stop the function manually by pressing the button once more.
d Cubed Ice
Press the Cubed Ice button to turn the Cubed Ice icemaker on/off.
e Smart Grid
Press the Smart Grid button to turn the function On/Off. When the function is on, the indicator
illuminates. The function automatically turns on when the refrigerator is connected to the Wi-Fi
network.
When the refrigerator is responding to a Demand Response (DR) message from the electric company,
the indicator illuminates.
f Wi-Fi
The Wi-Fi button, when used with the LG ThinQ app, allows the refrigerator to connect to a home Wi-Fi
network. Refer to Smart Functions for information on the initial setup of the application.
The Wi-Fi indicator shows the status of the refrigerator's network connection. The indicator illuminates
when the refrigerator is connected to the Wi-Fi network.
Press and hold the Wi-Fi button for 3 seconds to connect to the network. The indicator blinks while the
connection is being made, then turns on once the connection is successfully made.
g Refrigerator
Indicates the set temperature of the refrigerator compartment in Celsius (°C) or Fahrenheit (°F). The
default refrigerator temperature is 37 °F (3 °C). Press the Refrigerator button repeatedly to select a
new set temperature from 33 °F to 43 °F (1 °C to 7 °C).
NOTE
• To change the temperature mode from °F to °C (or vice versa) press and hold the Refrigerator and
Freezer buttons simultaneously for approximately five seconds. The temperature indicator on the
display window switches between Celsius and Fahrenheit.
• The displayed temperature is the target temperature, and not the actual temperature of the refrigerator.
The actual refrigerator temperature depends on the food inside the refrigerator.
h Water Filter
Replace the water filter when the water filter indicator turns on. After replacing the water filter, press
and hold the Water Filter button for three seconds to turn the indicator light off. Replace the water
filter approximately every six months.
i In-Door Ice
Press and hold the In-Door Ice button to turn the in-door icemaker on/off.
j Lock
The lock function disables every other button on the display.
• When power is initially connected to the refrigerator, the lock function is off.
• To lock the control panel buttons, press and hold the Lock button until the indicator illuminates and
the function is activated.
• To disable the function, press and hold the Lock button for approximately three seconds.
k Full-Convert Drawer
TM
Adjust the temperature of the convertible drawer to either colder or warmer than the refrigerator.
Refer to Full-Convert Drawer
TM
in the Operation section.
NOTE
Display Mode and InstaView Display Mode (For Store Use Only)