Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- Before Installing
- Choosing the Proper Location
- Removing/Assembling Handles
- Removing/Assembling Doors and Drawers
- Removing the Hinge Cover
- Removing the Left Refrigerator Door
- Removing the Right Refrigerator Door
- Removing the Freezer Drawer
- Removing the Full-Convert Drawer
- Assembling the Freezer Drawer
- Assembling the Full-Convert Drawer
- Assembling the Right Refrigerator Door
- Assembling the Left Refrigerator Door
- Assembling the Hinge Cover
- Connecting Refrigerator to Water Supply
- Leveling and Door Alignment
- Turning on the Power
- OPERATION
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
35OPERATION
ENGLISH
4 Pull the shelf out.
5 To assemble, tilt the front of the shelf up and
guide the shelf hooks into the slots at a
desired height.
6 Lower the front of the shelf so that the hooks
drop into the slots.
CAUTION
• Make sure that shelves are level from one side to
the other. Failure to do so may result in the shelf
falling or spilled food.
InstaView
This feature is only available on some models.
InstaView Compartment
Knock twice on the glass to turn the LED light
inside the InstaView on or off. The LED light turns
off automatically after 10 seconds.
NOTE
• The LED light does not turn on if either door is
open.
•The InstaView function will not activate for two
seconds after closing the door.
•The InstaView function is disabled when the ice
dispenser is in use.
Door-in-Door
This feature is only available on some models.
The Door-in-Door compartment allows for easy
access to commonly used food items.
InstaView Door-in-Door
Compartment
The InstaView function on the Door-in-Door
compartment lets you view the contents of the
compartment without opening the door.
To access the InstaView Door-in-Door
compartment, lightly press the button on the right
refrigerator door handle.