Owner's Manual

3.3 Arrangement of the burners on the hob

BURNERS

1. Auxiliary

2. Semi rapid

3. Rapid

4. Triple crown

3.4 Adjustment of the oven burner

To adjust the oven burners follow the procedure

described below from inside the oven:

• Open the oven door;

• Remove the oven dish and shelf.

• Lift up the oven floor and remove.

3.4.1 Replacement of the oven and grill burner nozzles

• Loosen the fixing screws A on the oven burner.

• Push the burner B towards the right to get to the nozzle.

• Use a 13 socket wrench to change the

nozzle, fitting the one for the type of gas

to be used (see point “3.2/3.3 Table of

burner and nozzle characteristics”).

3.4.2

Regulation of the primary air on the oven and grill burners

• Loosen the register screws “A” on the air regulation coupling.

• Turn the register coupling “B” to the position

corresponding to the type of gas to be used

according to the table below.

• Tighten the register screws and mount the seals.

• Once the operation is completed reassemble the

burner correctly.

NATURAL GAS

G30/G31 (LPG)

X = 5 mm 10 mm