Owner's Manual

11.2.2 Grids

Remove the grids and clean them in warm water with a non-

abrasive detergent, taking care to remove any incrustations.

Replace them on the cooking hob.

Continuous contact of the grids with the flame can cause the paint

near the hot areas to be altered. This is completely natural and

does not compromise the functionality of the component.

11.2.3 Burner caps and flame cap crowns

The caps and flame-spreader crowns are

extractable to facilitate cleaning. Wash them in hot

water with non-abrasive detergent, taking care to

remove any encrustations, and wait until they are

perfectly dry.

WARNING: do not wash these components in the

dishwasher.

Replace the flame-spreader crowns, checking that they are

positioned in their housing with their respective caps, taking care

that flame-spreader holes A correspond to the spark plugs and the

thermocouples.

11.2.4 The spark plugs and thermocouples

To function properly the spark plugs and thermocouples

must always be clean (on the models which are

equipped with them). Check them regularly and clean

with a damp cloth if necessary. Any dry residues can be

removed with a toothpick or a needle.

11.2.5 The burners

The burners can be left to soak in hot water and detergent.