Engineering Manual
ART COOL MIRROR INDOOR UNITS
,QVWDOODWLRQDQG%HVW/D\RXW3UDFWLFHV
Operation Mode Sequence
Cooling Mode
Ļ
Auto Operation
Ļ
Dehumidification Mode
Ļ
Heating Mode
Wired controllers include a sensor to detect room temperature. To maintain comfort
levels in the conditioned space, the wired controller must be installed in a location
DZD\IURPGLUHFWVXQOLJKWKLJKKXPLGLW\DQGZKHUHLWFRXOGEHGLUHFWO\H[SRVHGWR
cold air. Controller must be installed four (4) to five (5) feet above the floor where its
LED display can be read easily, in an area with good air circulation, and where it can
detect an average room temperature.
Do not install the wired controller near or in:
• Drafts or dead spots behind doors and in corners
• Hot or cold air from ducts
• Radiant heat from the sun or appliances
• Concealed pipes and chimneys
• An area where temperatures are uncontrolled, such as an outside wall
Figure 31: Wired Controller Connection on the Indoor Unit Terminal
Block—LAN090HSV4 and LAN120HSV4 models.
Indoor Unit Terminal Block
1(L1 ) 2(L2)
GND
GRN / YLW
BR
BL
RD
CN-REMO
To Outdoor Unit or Branch Distribution Unit
(Multi F MAX Systems Only)
To Wired Controller
3
Figure 32: Wired Controller Connection on the Indoor Unit Terminal
Block—LAN180HSV4 models.
Figure 33: Proper Location for the Wired Controller.
Indoor Unit Terminal Block
1(L1 ) 2(L2)
GND
GRN / YLW
BR
BL
RD
CN-REMO
To Outdoor Unit or Branch Distribution Unit
(Multi F MAX Systems Only)
To Wired Controller
3
Wired Controller Connections
Wired Controller Placement
4 to 5 feet
above the floor
NO
NO
NO
YES
Remote Controlle r
TEMP
Remote Controlle r
TEMP
R
e
m
o
t
e
C
o
n
t
r
o
l
l
e
r
T
E
M
P
ART COOL MIRROR | 29
Art Cool Mirror™
'XHWRRXUSROLF\RIFRQWLQXRXVSURGXFWLQQRYDWLRQVRPHVSHFL¿FDWLRQVPD\FKDQJHZLWKRXWQRWL¿FDWLRQ
©/*(OHFWURQLFV86$,QF(QJOHZRRG&OLIIV1-$OOULJKWVUHVHUYHG³/*´LVDUHJLVWHUHGWUDGHPDUNRI/*&RUS
MULTI
F
MAX
MULTI
F