Owner's Manual

Receiving Calls
1) When the phone rings or vibrate (if the Vibrate
Mode is enabled), press any key (except ) or
depending on the Call settings.
• When you press once, when a call is
received, the phone stops ringing or vibrating
depending on the mode it is in. Press twice
to disconnect.
2) To end an answered call press .
3) If you are not in the condition to receive call,
pressing Soft key 2 will send a Preset SMS to
Caller. The SMS can be editted using "Edit SMS on
Call Reject" function given under Settings.
Signal Strength
If you’re inside a building, being near a window may
give you better reception. You can see the strength of
your signal by the signal indicator ( ) on your
phone’s display screen.
About the antenna
Your phone has a built-in
antenna. As with any other
radio transmitting device,
do not touch the antenna
unnecessarily when the
phone is switched on.
Contact with the antenna
affects call quality and may cause the phone to
operate at a higher power level than needed.
Not touching the antenna during a call optimizes the
antenna performance and the talk-time of your phone.
Normal position: Hold the phone as you would any
other telephone.
RD6330 17
RD6330_Eng_OM-final.qxd 4/24/06 10:19 AM Page 17