Owner's Manual

2.1 Write
LMS(Long Message Service) allows you to send a
message up to 462 characters at a time. Before
sending LMS message, total number of sms packets
formed are intimated to the user and confirmation is
taken to send.
Maximum 3 packets for English and 4 for Hindi
messages can be sent. Each LMS packet is received
as individual message. Every LMS message shows
the packet sequence number in the message for ex: In
case of 3 packets, <1/3> <2/3> <3/3>.
2.1.1 Write Text
Text messages and page messages are all available.
Text messages: Transmits text.
Page messages: Only numbers without text
messages.
Press Send in Options to send the message.
To send a message enter the destination mobile
number in the Send To screen.
There are four optional menus of Send, Templates,
Save and Add Sign.
1. Press Soft Key 1 Menu, or .
2. Select Write.
3. Select Write Text.
4. After entering a message to be sent by selecting
Send, press Soft Key 1 Options.
G Send Use to send the message.
G Templates Select a Templates message.
G Save Save to Drafts message.
G Add Sign You can add signature.
5. After entering the phone number where the
message is to be sent, enter the next recipients
address by pressing . You can add up to 10
recipients. Press Soft Key 1 Options.
G Send Use to send the message.
G Last Select a recent sent number.
G SMS Groups Select SMS Group.
G Names Select a phonebook entry.
6. If you select Send, it notifies you whether the
message was sent successfully.
G Send Use to send the message.
G Priority Allows you to give the priority
to message. Normal or
Urgent.
RD6330 35
RD6330_Eng_OM-final.qxd 4/24/06 10:19 AM Page 35