Owner's Manual

4. After entering the e-mail address where the
message is to be sent, enter the next recipients
address by pressing . You can add up to 10
recipients. Press Soft Key 1 Options.
G Send Use to send the message.
G Domain Select a domain.
5. After entering a Subject, press Soft Key 1 Next.
6. After entering a message to be sent by selecting
Send, press Soft Key 1 Options.
G Send Use to send the message.
G Templates Select a Templates message.
G Save Save to Drafts message.
G Priority Allows you to give the priority
to message. Normal or
Urgent.
G Delivery Ack This function allows you to
know whether the message is
successfully transmitted to
other party or not when the
transmitted message is
received in other party’s
phone. If you want to activate
this function, set to On.
G Deferred Allows you to delay sending
the message until the
programmed time frame.
Immediate/After 30 Minutes/
After 1 Hour/After 2
Hours/After 12 Hours/After 1
Day/After 2 Days
G Validity Indicates the validity of
message delivery to the Short
Message Center (SMC)
without being transmitted to
the destination address for
certain periods of time. Those
messages will be deleted
within the programmed time
frame. Validity time frames are
as follows: Default, 30
Minutes, 1 Hour, 2 Hours, 12
Hours, 1 Day and 2 Days.
G Save Sent Msg You can save this message in
Outbox.
G Add Sign You can add signature.
RD6330 37
RD6330_Eng_OM-final.qxd 4/24/06 10:19 AM Page 37