Video Cassette with Line Player Recording OWNER'S MANUAL MODEL : CL-250TW/CL-240TW/ LGV-2001X PAL NTSC Before connecting, operating, please read this instruction booklet or adjusting this product, carefully and completely. Model No. CL152TW/CL172TW/CL182TW Part No.
Position your VCP so that no falls directly onto it. bright light or sunlight F e a t u r e s Precautions, Contes& Care should be taken not to expose your VCP to any unnecessary vibration, moisture, dust or heat. to qualified service remove If the unit is place, warm Thank you for buying this video cassette player. I am LG Service except personnel.
Each button on your VCP has the corresponding button control. (see page 6.) as its MODEL function same on the remote MODEL CL-250TW : 12 : CL-240TW 12 4 3 3 4 56 12 MODEL : 11 109 12 11 8 7 3 12 11 1. Power 2. 3. 109 (ON/OFF) Tape Eject Cassette Compartment Stop 109 8 456 REW & FF 78 8. Pause/Still 9. Remote Control Sensor 10. Function Indicators 5. 11. Play YourVCP'sntl 7. Record 4. Rewind 6.
The ToaTV Conecting guidance given on this page is the most common form of connection. However please check with yourmanufacturer's instruction books for specific information. Make sure all connections are made with both your VCP and additional appliance unplugged from the mains to avoid damaging your equipment. Connecting a VCP using Audio/Video cable is one of the best ways to achieve optimum sound and picture quality from video-tape playback (Recommended).
Your TV receives signals You have to select from the video a player (VCP) channel number like another TV station. your TV and tune it in so that you may watch video tapes. TV set equipped with AUDIO and VIDEO sockets this adjustment on If you connect a monitor or a will not be necessary, simply select the AV mode 1 Make 2 that you have installed your described earlier in sure Insert a video pre-recorded tape into your VCP and VCP press PLAY. this book.
Your video player (VCP) is designed so that almost all of its features CONTROL HANDSET. Some features RemotCnrl Locatin&Fu must also be on or on on EJECT from Eject a Battery tape. SET is OPR EJECT (see REC RECORD Starts SPEED TRACKING a remove the batteries, store them in a cool, dry place and out of the reach of children. speed PLAY FF STOP REWIND Rewinds the tape. long Reverse high speed picture play. PLAY To play AAA SPEED To select the REW A.
You You can can set the select the colour system used for system by pressing SYSTEM on playback the front of your VCP. Each time you press SYSTEM, a relevant indicator lights up for a few seconds in the display window. The system is Source Mode changed as shown below. recording. aSystem Selcting System Change PAL/ Recording AUTO PALMESECAM MESECAM Playback AUTO PALMESECAM NTSC and Recording NTSC3.58 NTSC4.43 Playback NTSC-PB NTSC3.58 NTSC4.
This VCP is How to designed to back and record cassettes play systems. You will only be able Getting When playbcktpe a better to load and eject using PAL, MESECAM, and NTSC video cassettes when your VCP is (3.58 or 4.43) colour plugged into the mains. picture playback started, the automatic tracking function works to get the best possible picture automatically.
Video Head Dirt blurred or but old or Cleaning a long period of time can cause the playback picture to become High quality video cassette tapes will not normally deposit dirt onto the video head, damaged tapes might. Clean the video heads with a commercially available video heads cleaning accumulating on the head after broken up. tape. 4 5 STILL Press P/STILL to still Visual search Press either FF a picture. STOP P/STILL A.REPEAT REW or back.
Other PlaybckFeturs 1 2 Repeat playback If you want to play back tape repeatedly, Press a A.REPEAT. A.REPEAT indicator up in the display lights When the end of the tape is reached, VCP automatically rewinds tape to the beginning and repeats playback continuously. Logic search Hold down FF to watch a REW of tape fast forward or during rewind. Your VCP switches forward window. If you want to release this function, press A.REPEAT again. reverse Release the button to return to or rewind.
Make all connections sure damaging your are made with both your VCP's and Television 1 2 Connect your VCP to another VCP as shown TV set Press POWER to turn on Insert a blank video your VCP. tape with the record Insert protection tab into (recording) VCP. a source Aerial pre-recorded Press STOP / EJECT to stop recording. Tapes Dub ing your tape into another (playing) VCP. Simultaneously begin playback on another VCP and record VIDEO from the mains to avoid 4 3 below.
Your VCP allows you to make How to record 1 recordings connecting to a TV 2 Connect your VCP to as shown below. a TV Press POWER to turn equipped with AUDIO and VIDEO sockets. 3 on your VCP. Insert 4 a video cassette with the record protection tab Set the desired recording speed by pressing SPEED. into your VCP. Your external aerial must be in your TV.
6 5 Press REC to start 7 Press P/STILL to avoid recording unwanted recording. scenes. During recording of TV programme you do not TV channel number on your TV. change the Press STOP to end recording. indicator flashes in the display window. REC Press P/STILL continue again recording. to PLAY REW FF STOP can be paused for up to 5 minutes. After 5 minutes your VCP will stop recording to Tapes prevent damaging the tape your VCP. or Press EJECT.
Check the No STroubleshting& pecifatons ? ? ? ? following & picture no Is the mains before for service. calling plug plugged Is the TV switched Have you tuned in watch video tapes on a General Power ..................................AC 110-240V, 50/60Hz Power consumption.............Approx. 10 Watts sound in and switched on ? ? ? format Dimensions video channel on your TV to page 5.
P/N: 3834RP0064G
