FRANÇAIS GUIDE DE L'UTILISATEUR LG-W150 MFL69148301 (1.0) www.lg.
Guide de l'utilisateur • • • • • FRANÇAIS Certains contenus et illustrations peuvent différer de votre appareil selon la région, le fournisseur de services, la version du logiciel ou la version du SE, et peuvent changer sans préavis. Utilisez toujours des accessoires LG d'origine. Les articles fournis sont conçus uniquement pour cet appareil et peuvent ne pas être compatibles avec d'autres appareils. Cet appareil n'est pas approprié pour les personnes malvoyantes en raison de l'écran tactile.
Table des matières Consignes de sécurité...............................4 Utilisation de la montre...........................16 Disposition de la montre.........................16 Charge de la montre...............................18 Mode de charge.....................................21 Si l'écran se fige.....................................21 Mise sous tension et hors tension de la montre...................................................21 Connexion à un autre appareil mobile.....
Réglage des paramètres.........................47 Accès au menu Paramètres....................47 Réglage de la luminosité de l'écran........47 Changer le cadran de votre montre.........47 Taille des caractères...............................48 Gestes du poignet...................................48 Paramètres Wi-Fi....................................48 Appareils Bluetooth................................48 Activation ou désactivation de l'option Écran toujours allumé.............................49 Mode Avion..
Consignes de sécurité Avant d’allumer votre produit, prenez connaissance des consignes de sécurité de base fournies dans ce document. Mesures de sécurité générales et manipulation Lorsque vous utilisez votre produit, gardez à l’esprit les directives utiles suivantes. Votre environnement • Températures de service sécuritaires. Utilisez et rangez votre produit à une température entre 0° C (32° F) et 40° C (104° F).
interférences ou constituer un danger. Le remplacement du bracelet par un bracelet en métal peut entraîner des problèmes avec la connectivité Bluetooth/Wi-Fi. Conseils de sécurité AVERTISSEMENT : Le socle de chargement contient de puissants aimants pouvant nuire aux stimulateurs cardiaques, aux cartes de crédit, aux montres et autres objets sensibles au magnétisme.
• • • • • • • • • • 6 N’exposez pas le produit au feu, à des explosions ou à d’autres dangers. Nettoyez votre produit à l’aide d’un chiffon doux et humide. N’utilisez pas de produits chimiques forts (comme de l’alcool, du benzène et des diluants) ni de détergents pour nettoyer votre produit. Ne jetez pas votre produit et la batterie avec les ordures ménagères, et respectez la réglementation locale en matière d’ordures.
• • • Ne regardez jamais directement la lumière du capteur de fréquence cardiaque, car cela pourrait causer une lésion oculaire. Si votre appareil devient chaud, retirez-le jusqu’à ce qu’il refroidisse. L’exposition de la peau à la surface chaude durant une longue période peut causer des brûlures. La fonction Fréquence cardiaque est seulement conçue pour la lecture de la fréquence cardiaque et ne doit pas être utilisée à d’autres fins.
• • • • l’échappez sur une surface dure, faites-le inspecter dans un centre de service. La mauvaise utilisation d’une batterie peut causer un incendie ou une explosion ou présenter d’autres dangers. Une fois le produit chargé, débranchez le chargeur de la prise murale pour éviter une consommation inutile d’électricité. Il ya risque d'explosion si la batterie est remplacée par un type incorrect. Pour vous débarrasser de la batterie de façon appropriée, composez le 1 800 822-8837 ou visitez le http://www.
SALT SOAP SALT SALT SOAP ’immergez le produit dans aucun liquide chimique (savon, etc.) autre que de N l’eau. N’immergez pas le produit dans l’eau salée (comme l’eau de mer). SOAP N’immergez pas le produit dans une source chaude. Ne nagez pas avec le produit. SALT N’utilisez pas le produit sous l’eau. SOAP SALT SOAP SALT SOAP • • • • • 9 Ne déposez pas le produit directement sur du sable (sur une plage, par exemple) ou de la boue.
Stimulateurs cardiaques et autres appareils médicaux Les personnes portant un stimulateur cardiaque : • doivent TOUJOURS tenir le produit à une distance d’au moins 15 cm (6 po) de leur stimulateur cardiaque lorsque le produit est SOUS TENSION; • ne doivent pas transporter le produit dans une poche poitrine; • doivent utiliser le poignet à l’opposé de leur stimulateur cardiaque afin de minimiser le risque d’interférence par radiofréquence; • doivent immédiatement mettre le produit HORS TENSION lors de toute
Conseils concernant l’écran • • N’affichez pas d’images fixes durant de longues périodes. Cela peut provoquer l’apparition d’une image rémanente ou de taches sur l’écran. Les applications qui affichent la même image durant plus de 10 minutes ne sont pas recommandées parce que les éventuels dommages à l’écran ne sont pas couverts par la garantie.
Valeurs de débit d'absorption spécifique (DAS) Votre produit est un émetteur-récepteur radio. Il a été conçu et fabriqué de façon à ne pas dépasser les limites d'émission d'énergie de radiofréquences (RF) fixées par la Federal Communications Commission (FCC) du gouvernement des États-Unis. Ces normes appliquent une marge de sécurité importante de façon à assurer la sécurité de toutes les personnes, quels que soient leur âge et leur état de santé.
Les données de DAS pour ce modèle ont été déposées auprès de la FCC et peuvent être consultées dans la section intitulée Display Grant du site Web de la FCC (http://transition.fcc.gov/oet/ea/fccid/), sous l'ID FCC ZNFW150. D'autres renseignements sur le DAS sont offerts sur le site Web de la Cellular Telecommunications Industry Association (CTIA), à l'adresse http://www.ctia.org/. * Ce produit est conforme aux directives de la FCC et d'Industrie Canada (IC) en matière d'exposition aux radiofréquences.
Énoncé de la partie 15.21 : Les modifications non approuvées expressément par le fabricant peuvent annuler l’autorisation accordée à l’utilisateur de faire fonctionner l’équipement. Énoncé de la partie 15.19 (États-Unis) et exigences générales CNR (Canada) : Cet appareil est conforme aux limites imposées par la partie 15 de la réglementation de la FCC et aux normes CNR d’Industrie Canada applicables aux dispositifs exempts de licence.
COMMENT METTRE À JOUR VOTRE APPAREIL Accédez aux plus récentes versions du micrologiciel, aux nouvelles fonctionnalités logicielles et aux améliorations. 1 Maintenez l’interrupteur enfoncé jusqu’à ce que la liste des applications apparaisse. 2 Touchez Paramètres > À propos > Mises à jour du systéme sur votre appareil.
Utilisation de la montre Disposition de la montre Interrupteur  Remarque : L'écran tactile ne doit entrer en contact avec aucun autre appareil électrique. Les décharges électrostatiques risquent de nuire au fonctionnement de l'écran tactile.
Interrupteur Pendant que l'écran est éteint: • Maintenez l'interrupteur enfoncé pendant quelques secondes, jusqu'à ce qu'il s'allume et que le logo LG apparaisse. Si l'écran est gelé: • Maintenez l'interrupteur enfoncé pendant plus de 10 secondes, jusqu'à ce que la montre redémarre et que le logo LG apparaisse. Alors que l'appareil est en veille : • Appuyez rapidement une fois pour réactiver l'écran et l'éteindre. • Appuyez brièvement deux fois pour activer ou désactiver Mode cinéma.
Avertissement Ne bloquez pas l'orifice situé au bas de l'appareil et n'y enfoncez aucun objet pointu. Cela pourrait provoquer un dysfonctionnement de votre appareil. Charge de la montre Avant d'utiliser la montre pour la première fois, vous devriez charger la batterie. Utilisez le socle de chargement fourni avec la montre pour charger la batterie de l'appareil. Vous pouvez aussi charger la batterie de l'appareil à l'aide d'un ordinateur.
1 Localisez les bornes de charge sur la montre et sur le socle de charge. Bornes de charge  Remarque : Le socle de charge est conçu pour être utilisé uniquement avec la montre et n'est donc pas nécessairement compatible avec d'autres appareils. 2 Branchez la petite extrémité du câble USB fourni dans le port USB du socle de charge. 3 Placez la montre sur le socle de charge en vous assurant que les bornes de charge sont alignées.
4 Branchez le socle de charge à une prise murale. Si la montre est éteinte, elle s'allumera automatiquement. 5 Une fois que la batterie de la montre est entièrement chargée, débranchez l'appareil du socle de charge. Remarque : • L'écran tactile pourrait ne pas fonctionner si l'alimentation de la montre est instable durant la charge. • La montre peut devenir chaude pendant qu'elle se recharge. Ceci est normal. Si la batterie devient plus chaude que d'habitude, débranchez le chargeur.
Mode de charge Après la configuration initiale, vous verrez l'écran de charge montré ci-dessous pendant le chargement. Il affiche l'heure et le pourcentage de charge restante. Faites défiler vers la droite pour revenir à l'écran de la montre. Niveau de la charge Heure Pourcentage de charge  Si l'écran se fige Si l'écran se fige et cesse de fonctionner, maintenez l'interrupteur enfoncé pendant plus de 10 secondes, jusqu'à ce que l'écran s'allume et que le logo LG apparaisse.
Mise hors tension de la montre 1 Maintenez l'interrupteur enfoncé jusqu'à ce que la liste des applications apparaisse. 2 Touchez Paramètres > Éteindre. 3 Lorsque le message Éteindre : Vraiment? apparaît, touchez . Connexion à un autre appareil mobile Si vous souhaitez connecter votre montre à un autre appareil, vous devez la réinitialiser. Réinitialisation de votre montre Cette fonction réinitialise tous les paramètres de votre montre à leurs valeurs par défaut et supprime toutes vos données.
Tapoter ou toucher Maintenir le doigt Glisser ou balayer Port de la montre Précautions quant à l'imperméabilité Votre montre a été testée dans un environnement contrôlé et s'est révélée pouvoir résister à l'eau et à la poussière dans certaines circonstances (répond aux exigences de la classification IP67 telle que décrite dans la norme internationale IEC 60529 Degré de protection fourni par les boîtiers [code IP]; conditions de test : 15 à 35 °C (59 à 95 °F), 86 à 106 kPa, 1 mètre (environ 3 pieds), pend
• • • • L'écran tactile et d'autres fonctions pourraient ne pas fonctionner correctement si l'appareil est utilisé dans l'eau ou dans un autre liquide. Si la montre a été submergée dans l'eau ou si le microphone ou le hautparleur a été exposé à l'eau, la qualité du son peut en être altérée. Essuyez le microphone ou le haut-parleur avec un linge sec et propre.
REMARQUES : • Un ajustement trop lâche ou des mouvements trop prononcés peuvent fausser la mesure. • Ne regardez jamais directement la lumière du capteur de fréquence cardiaque, car cela pourrait causer une lésion oculaire. • Si la lecture du rythme cardiaque est inexacte, recommencez en posant la montre à l'intérieur de votre poignet.
Connexion de la montre avec un appareil mobile Avant le jumelage Avant de jumeler les appareils, veuillez faire ce qui suit sur le téléphone ou la tablette. 1 Assurez-vous que la version d'Android sur le téléphone ou la tablette est Android 4.3 ou une version supérieure et que l'appareil prend en charge la connectivité Bluetooth®. • Pour savoir si votre téléphone ou votre tablette prend en charge Android Wear, visitez le site http://g.co/WearCheck à partir de votre téléphone ou de votre tablette.
Jumelage de votre montre 1 Allumez la montre et faites glisser l'écran de bienvenue vers la gauche pour commencer. 2 Touchez une langue. 3 Branchez votre montre à une source d'alimentation et faites glisser votre doigt vers la gauche pour continuer. Conseil : Si la batterie est chargée à moins de 20 %, chargez votre montre avant de passer à l'étape suivante. 4 Faites glisser votre doigt vers la gauche et suivez les instructions à l'écran jusqu'à ce que le code de la montre s'affiche.
Utilisation de votre montre Commencez par le cadran de votre montre (où vous voyez l'heure) Réveillez d'abord votre montre. Si l'écran de la montre est sombre, vous pouvez réveiller celle-ci de l'une des façons suivantes : • En touchant l'écran. • En tournant le poignet de façon à ce que le cadran de la montre soit à la verticale. • En appuyant sur l'interrupteur de la montre. Réduisez immédiatement la luminosité de l'écran Posez la paume de la main sur l'écran jusqu'à ce qu'il vibre.
Conseil : Vous pouvez également télécharger et changer l'écran de la montre à partir de l'application Android Wear . Cartes de notification La plupart des notifications que vous voyez sur votre téléphone s'afficheront aussi sur votre montre. Il s'agit notamment de notifications d'appel manqué, de message texte, de rappel d'événement, etc. Les notifications s'affichent sous forme de cartes au bas du cadran. Faites défiler vers le haut pour voir davantage de cartes.
Pour faire disparaître une carte, faites-la glisser de gauche à droite. Une fois que vous avez fini de regarder une carte, vous pouvez la faire disparaître. Si vous supprimez une carte sur votre montre, elle disparaît également de votre téléphone. Pour afficher plus de détails, faites glisser la carte de droite à gauche. Certaines cartes fournissent plus de détails ou vous permettent de poser des gestes.
3 Sélectionnez l'application que vous voulez bloquer. Notifications d'appels Vous pouvez obtenir des notifications d'appels instantanées lorsque vous recevez un appel. La notification vous donne le numéro de l'appelant ou les contacts de votre téléphone et vous offre le choix d'accepter ou de refuser l'appel. REMARQUE : Votre montre ne peut que recevoir l'avis. Pour répondre au téléphone, utilisez l'appareil associé à votre montre.
: Touchez pour autoriser toutes les interruptions. REMARQUE : Le contenu peut différer selon la version du système d'exploitation de votre appareil. Voir la charge de la batterie ou la date Faites défiler l'écran de haut en bas. Autonomie restante Date  REMARQUE : Le contenu peut différer selon la version du système d'exploitation de votre appareil.
jusqu'à ce que vous voyiez le mode Cinéma fonction. . Touchez l'icône pour activer cette Augmenter temporairement la luminosité de l'écran Vous pouvez augmenter la luminosité temporairement si vous êtes à l'extérieur dans un endroit très ensoleillé. Cela durera quelques secondes et sera désactivé automatiquement. Appuyez rapidement trois fois sur l'interrupteur. OU 1 Si l'écran est sombre, touchez-le pour réveiller la montre. 2 Faites défiler l'écran de haut en bas.
Pour voir les détails relatifs au stockage : 1 Votre montre doit être connectée à votre téléphone. 2 Sur votre téléphone, ouvrez l'application Android Wear . 3 Appuyez sur > Si vous avez plusieurs appareils, touchez le nom de votre montre > Stockage sur la montre.
Exécution de tâches par commande vocale Vous pouvez voir un menu de tâches simples sur votre montre; tout ce qui se trouve dans cette liste peut aussi être dit à voix haute. Dites simplement « Ok Google » ou faites glisser l'écran d'accueil vers la gauche jusqu'à ce que l'option Parlez maintenant s'affiche, puis dites votre commande ou posez votre question. Par exemple, une fois dans le menu Parlez maintenant, vous pouvez toucher Lancer le chronomètre.
Changer les applications que vous utilisez pour les commandes vocales Vous pouvez choisir les applications à utiliser pour différentes commandes vocales. Par exemple, vous pouvez changer l'application que vous utilisez pour définir des alarmes ou pour envoyer des messages. 1 Sur votre téléphone, ouvrez l'application Android Wear . 2 Dans la moitié inférieure de l'écran, vous verrez une liste d'actions. 3 Faites défiler l'écran et touchez une action. Vous pouvez choisir parmi les applications disponibles.
REMARQUE : Si vous avez installé QuickMemo+ ou Google Keep sur votre téléphone : • L'application transforme les mots que vous prononcez en texte. Lorsque vous avez fini de parler, le texte de votre note est enregistré dans QuickMemo+ ou Google Keep sur votre appareil mobile. • Vous pouvez afficher et modifier vos notes en ouvrant l'application sur votre appareil mobile. Définir un rappel Vous pouvez parler à votre montre pour définir un rappel.
chaque jour. 4 Pour afficher la liste de pas faits chaque jour, faites glisser votre doigt vers le haut de l'écran. Me montrer mon pouls Vous pouvez utiliser l'application Moniteur cardiaque pour mesurer et enregistrer votre rythme cardiaque actuel. REMARQUE : La fonction de mesure du rythme cardiaque ne doit pas être utilisée à des fins cliniques ou de diagnostic médical.
4 Si vous utilisez cette fonction pour la première fois, vous devez sélectionner Google Fit ou LG Pulse. Sélectionnez l'application à utiliser; elle s'affichera par défaut par la suite. 5 Votre montre commencera à mesurer votre rythme cardiaque. Après un court laps de temps, vous verrez votre rythme cardiaque à l'écran, avec la liste de relevés de rythme cardiaque. 6 Vous pouvez prendre une autre mesure en touchant Vérifier de nouveau.
Courriel Votre montre peut être utilisée pour rédiger des courriels et lire les courriels que vous recevez sur votre appareil mobile. 1 Si l'écran est sombre, appuyez dessus pour réveiller la montre. 2 Dites « Ok Google » à partir du cadran ou touchez n'importe où sur l'arrière-plan de l'écran, puis faites glisser vers la gauche. Vous verrez l'invitation Parlez maintenant. 3 Dites « Courriel ». 4 L'écran À qui? s'affiche.Vous verrez l'invitation Parlez maintenant.
2 Dites « Ok Google » à partir du cadran ou touchez n'importe où sur l'arrière-plan de l'écran, puis faites glisser vers la gauche. Vous verrez l'invitation Parlez maintenant. 3 Dites « Agenda ». Vous verrez la liste de vos événements prévus. 4 Pour afficher les détails d'un événement, touchez l'événement. Naviguer Vous pouvez trouver votre chemin vers une destination donnée à l'aide de la montre. 1 Si l'écran est sombre, appuyez dessus pour réveiller la montre.
Utiliser le chronomètre Mesurer le temps écoulé à l'aide de l'application Chronomètre. 1 Si l'écran est sombre, appuyez dessus pour réveiller la montre. 2 Dites « Ok Google » à partir du cadran ou touchez n'importe où sur l'arrière-plan de l'écran, puis faites glisser vers la gauche. Vous verrez l'invitation Parlez maintenant. 3 Dites « Chronomètre ». 4 Touchez pour commencer. Définir une alarme Vous pouvez régler plusieurs alarmes sur votre montre.
Voir les alarmes actuelles 1 Si l'écran est sombre, appuyez dessus pour réveiller la montre. 2 Dites « Ok Google » à partir du cadran ou touchez n'importe où sur l'arrière-plan de l'écran, puis faites glisser vers la gauche. Vous verrez l'invitation Parlez maintenant. 3 Dites « Afficher les alarmes ». Vous verrez la liste des alarmes que vous avez définies sur votre montre.
Utilisation des applications La liste des applications affiche les applications installées sur votre montre. Pour installer les applications sur votre montre : 1 Si l'écran est sombre, appuyez dessus pour réveiller la montre. 2 Touchez n'importe où sur l'arrière-plan de l'écran pour ouvrir la liste des applications. Téléchargement d'autres applications Vous pouvez voir la liste des applications recommandées dans Google Play Store .
Maintenez le doigt sur l'icône afin d'entrer le signe plus (+) et de composer un numéro à l'étranger. Appuyez ici pour supprimer un chiffre erroné. Appuyez pour composer le numéro entré.  REMARQUE : Cette fonction sera disponible après la mise à jour logicielle prévue pour le mois de mai 2015. Utilisation de l'application Google Fit L'application Google Fit vous permet de compter vos pas et de voir la distance parcourue. Elle peut aussi afficher votre rythme cardiaque.
Mesure de votre pouls Vous pouvez parler ou utiliser le menu de votre montre pour connaître votre pouls. Dites « OK Google » > Lorsque vous voyez l'invitation Parlez maintenant, dites « Me montrer mon pouls ». (Consultez la section Me montrer mon pouls pour en savoir plus.) OU 1 Ouvrez l'application Google Fit et faites défiler vers la gauche jusqu'à ce que votre pouls s'affiche. 2 Faites défiler vers le bas pour voir l'historique des mesures de rythme cardiaque ou appuyez sur pour mesurer votre pouls.
Réglage des paramètres Accès au menu Paramètres 1 Si l'écran est sombre, appuyez dessus pour réveiller la montre. 2 Appuyez n'importe où sur l'arrière-plan de l'écran et faites-le défiler vers le haut, jusqu'aux paramètres. OU • Faites défiler l'écran de haut en bas puis faites défiler vers la gauche jusqu'à ce que vous voyiez le menu Paramètres. Appuyez ensuite sur Paramètres . Réglage de la luminosité de l'écran La luminosité de l'écran de la montre peut être modifiée sur l'appareil lui-même.
Taille des caractères Vous pouvez définir la taille des caractères affichés sur la montre. 1 Appuyez sur Taille de police dans le menu Paramètres. 2 Choisissez une taille de police en touchant une option. Gestes du poignet Vous pouvez réveiller ou assombrir la montre en faisant quelques mouvements. Tournez le poignet de façon à ce que le cadran de votre montre soit à la verticale. • Appuyez sur Gestes du poignet dans le menu Paramètres afin d'activer ou de désactiver la fonction.
Activation ou désactivation de l'option Écran toujours allumé Vous pouvez programmer l'écran pour qu'il affiche l'heure ou s'éteigne complètement lorsque vous ne vous servez pas de la montre. Si vous le programmez pour qu'il s'éteigne, l'écran s'allumera quand vous l'inclinerez ou le toucherez. • Appuyez sur Écran toujours allumé dans le menu Paramètres pour activer ou désactiver la fonction. • Activé : Un cadran assombri s'affiche lorsque votre montre est inactive.
Rétablissement des paramètres par défaut 1 Appuyez sur Paramètres > Paramètres par défaut. Vous devez confirmer. 2 Appuyez sur . • Votre montre se connecte à un appareil mobile à la fois. • La réinitialisation des paramètres par défaut efface toutes les données de la mémoire de votre montre. Lorsque l'opération est terminée, la montre est prête à se connecter à un autre appareil mobile. Redémarrer Cette option redémarre votre montre. 1 Appuyez sur Redémarrer dans le menu Paramètres.
À propos de Les renseignements sur votre montre sont affichés ici. Vous pouvez voir le modèle, le nom de l'appareil, la version du logiciel, le numéro de série, le numéro d'édition, ainsi que des détails sur la connexion et la batterie. Les options suivantes sont également offertes. • 51 Appuyez sur À propos de dans le menu Paramètres. • Mises à jour du système : Cette option vous permet de vous assurer que votre montre est dotée du logiciel le plus récent.
À propos de ce guide de l'utilisateur À propos de ce guide de l'utilisateur • • • • • • • 52 Veuillez lire ce manuel attentivement avant d'utiliser votre appareil. Vous vous assurerez ainsi de l'utiliser correctement et de manière sécuritaire. Certaines des images et captures d'écran figurant dans le présent guide peuvent différer de ceux de votre produit. Votre contenu peut être différent du produit final ou du logiciel fourni par votre fournisseur de services.
besoins. Pour de plus amples détails, communiquez avec votre fournisseur de services. Marques de commerce • • 53 LG et le logo LG sont des marques déposées de LG Electronics. Tous les autres droits d'auteur et marques de commerce sont la propriété de leurs détenteurs respectifs.
Accessoires Ces accessoires sont disponibles pour utilisation avec votre appareil. (Les articles décrits ci-dessous peuvent être offerts en option.) • • • • Adaptateur de voyage Guide de démarrage rapide Câble USB Socle de charge REMARQUE : • Utilisez toujours des accessoires LG d'origine. Les articles fournis sont conçus uniquement pour cet appareil et peuvent ne pas être compatibles avec d'autres appareils.