LH-A6730A JABSNLS AV RECEIVER OWNER'S MANUAL MODEL: LH-T6000 (AMP: LH-A6730A DVD Player: DV7100 Speakers: LHS-A6730T, LHS-A6730C, LHS-A6730W) Before connecting up, operating or repairing product, please read this instruction booklet carefully and completely.
Safety Precautions CAUTION IMPORTANT SAFETY NOTICE RISK OF ELECTRIC SHOCK DO NOT OPEN grip for the plug fitted to this product is built into existing power cord as supplied. If, for any reason you need to shorten the cord, The cord CAUTION: TO REDUCE THE RISK the OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE DO NOT RE-USE THE PLUG. PERSONNEL.
Before Use Table of Contents Introduction SafetyPrecautions..........................2 Precautions TableofContents...........................3 Handling BeforeUse................................3 FrontPanelButtonsandDisplayWindow . . . . . . . . .4 When the unit shipping the unit RearPanel................................6 It may be convenient to keep the original shipping carton and packing materials come in handy. For maximum Preparation protection, re-pack at the factory.
Front Panel Buttons and Display Window SURROUND MODE Select STANDBY-ON FUNCTION/JOG Dial MASTER VOLUME Control(UP/DOWN) TUNING MODE REMOTE Sensor DISPLAY Window SET/MEMORY INPUT SELECT STANDBY indicator red when the receiver Lights Standby is in mode HEADPHONE Jack (off).
Remote Control Buttons MUTE POWER VIDEO1 FM/AM VIDEO2 CD/DVD Input Selector TV input Selector input Selector input Selector AUDIO INPUT(AMP)/TV AV(TV) TITLE(DVD) NUMBERS(DVD/TV) TEST TONE(AMP) BY PASS(AMP) PRO LOGIC II(AMP) DYNAMIC RANGE(AMP) MONO/STEREO(AMP) SURROUND(AMP)/ SOUND(DVD) REPEAT(DVD) REPEAT A-B(DVD) RETURN(DVD) ZOOM(DVD) CLEAR(DVD) SPEAKER MODE(AMP) PROGRAM(DVD) MARKER(DVD) VOLUME(+/-) PRESET(+/-)(AMP)/ SLOW(DVD) SEARCH(DVD) DELAY(AMP)/ MENU(DVD) LEVEL(AMP)/ SETUP(DVD) CURSOR F
Rear Panel FM 300Ω Antenna Connector SPEAKER Connectors AM Antenna Connectors VIDEO1 Input Connectors VIDEO2 Input Connectors DVD Input Connectors TV Input Connectors VIDEO1 Output POWER Connectors MONITOR OUT Connector SUBWOOFER PRE OUT S-VIDEO OUT Connector Connector 6(5.1) CHANNEL AUDIO OUT Connect to -- 6(5.
Antenna Connections Connect the supplied FM/AM antennas loop antenna to the Connect the AM for listening to the radio. AM antenna connector. Connector the FM wire antenna to the FM 300Ω connector. FM Wire antenna AM (supplied) Loop antenna PREATION (supplied) otes To prevent noise pickup, keep the AM loop antenna away from the AV Receiver and other components. Be sure to fully extend the FM wire antenna. After connecting the FM wire antenna, keep it as horizontal as possible.
Connecting Make the one of the capabilities Tips Depending to a TV following connections, depending existing equipment. on of your on your TV and other equipment you wish Please refer to the manuals of your TV, VCR, Stereo or other devices as necessary to make the System best connections. Connect the MONITOR OUT jack Receiver to the video in on the AV Receiver is connected TV. Select the correct AV input on directly your TV. to the jack on the AV the TV using the (V).
Connecting to Video Equipment Rear of VCR1 AUDIO OUTPUT L R VIDEO OUTPUT VIDEO L PREATION R L A V A S-VIDEO OUT AUDIO INPUT INPUT S Rear of AV receiver Rear of VCR2 VIDEO OUTPUT or LDP AUDIO OUTPUT L R Connection 1 Connect VCR1's audio and video out VIDEO1 IN jacks on the AV Receiver audio and video cable in jacks on to the the The audio and video the VCR1 should be connected to the VIDEO1 OUT 2 (A, V). jacks using Connect the jacks on the AV Receiver.
Connecting to Optional Equipment Rear of DVD player (or Digital Device, etc) VIDEO OUTPUT R L AUD O OPTICAL OUTPUT A COAXIAL D GITAL OUTPUT V O X Rear of AV receiver Connection If the equipped with COAXIAL or OPTICAL DIGITAL OUT jacks, connect them to to the corresponding input jacks of the AV auxiliary devices (e.g. DVD) are Receiver.
Connecting Analog to Optional Equipment (Cont'd) connection to connectors a multi-channel A/V receiver with 6(5.1) Channel (Dolby Digital) This AV receiver contains a multi-channel decoder. This enables Surround without the need for an optional playback of DVDs recorded in Multi-channel decoder. PREATION Rear of DVD player C F R 1 Connect the CENTER and WOOFER jacks for the speaker and the Subwoofer (C) to the corresponding in jacks on your receiver.
Assembling The front and front and rear and Connecting to the speakers are detached from the speaker speakers from speaker stands as illustrated. rear Speakers stands. Connect the speaker cords and assemble the How to connect the use Connect the cords to the nals on After speaker use connecting terminals on 12 speaker to the stand appropriate termirear speaker.
Speaker System Connection Connect the speakers using To obtain the best possible the supplied speaker surround sound, cords. adjust the speaker parameters (distance, level, etc.). Front Speaker (Right) Front Speaker (Left) If you feel lack of bass frequency Connect an PREATION active subwoofer to the WOOFER PRE-OUT connector using a monaural audio cord (not supplied). When you connect an active subwoofer, disconnect the woofer from the SUBWOOFER speaker connector.
Speaker Positioning In the case of normal position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and sub- woofer). If you want to subwoofer. ? ? play the excellent bass sound, DTS Front speakers According to your listening position speakers to 45 degree. Centre set up the speaker speakers and front speakers The centre ? are digital surround or Dolby Digital surround, speakers for equal distance. And by hearing position ideally the same height.
Speaker Settings Delay After you have installed this unit and connected all the components, you first perform the speaker setup settings for the optimum sound acoustics according to your environment and speaker layout. 1 Press 2 control. AMP and press SPK MODE on the remote speaker mode Dolby Digital or Setting Dolby Pro Logic mode it is assumed that the distance from the listener to each of the speakers is equal.
Delay Time Setting (Cont'd) C WIDTH Setting the delay time in the Dolby Digital and Dolby Pro Logic (II) mode The current surround delay time appears in the Display Window. 2 Press 3 If / to change the time. delay posispeaker and the left/right speakers over a range of eight steps. Step "3" uses a combination of all three front speakers to give the best vocal imaging and most seamless soundstage presentation, and is recommended for most recordings.
Sound Level Yo u can Test Tone set the sound level of the desired channel. Press AMP and press LEVEL 1 on the remote control. The level indicator will appear in the 2 / Press to select a desired Each time you press the in the / Display Window. speaker This function allows you to can easily adjust the sound balance of the speakers from the listener's position. Select the test tone mode 1 A hiss noise to set.
Mini Glossary for Sound Mode (II) Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources bearing the trademark such as ers discs, DVD and compact discs, etc. DTS Digital Surround delivup to 6 channels of transparent audio(which means identical to and results in the original masters) exceptional clarity throughout degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC.
Sound Mode You Adjusting Dynamic Range enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Press SURR. repeatedly until the sound mode you want appears in the display window as below. Each time you press SURR.
OSD Menu Settings The OSD(On-screen display) menu allows you to perform the setup procedures easily. In most situations, you will only need to set this once during the installation and be layout of your changed later. Press OSD 1 home theater, and it on rarely needs to 1 When selecting Press / INPUT the INPUT SELECT the remote control to select the on ENTER. SELECT, then press the remote control.
OSD Menu When selecting the TONE CONTROL / Press 1 Settings (Cont'd) on 3 / Press Depending the remote control to select the one TONE CONTROL, then press ENTER. on the remote control to select the desired mode. your speaker type, you following speaker types. on of these can select LARGE: Select this when connecting speakers that fully reduce sounds below 80 Hz. can SMALL: Select this when connecting speakers that cannot fully reduce sounds below 80 Hz.
with Radio Operation Presetting the Radio Stations preset 30 stations for FM and AM. Before You can ing, make sure tun- that you have turned down the volume. By using 1 on Press TUNING MODE twice until the frequency on the front band appears in the panel Display Window. the Remote control Press FM/AM the Front Panel By using The word FM or AM will blink in the Display Window. the remote control to select desired band.
Operation with Radio Other (Cont'd) to the Radio Listening Sleep Preset radio stations in the AV receiver's memory first (see "Presetting the radio stations" on page 22.) You specified 1 1 Press FM/AM on can Operations Timer Setting set the AV receiver to turn off automatically at a time. Press SLEEP to set the desired The SLEEP indicator and sleep sleep time appears time. in the dis- play window. the remote control. The last received station is tuned in.
Troubleshooting Check the following guide for the possible cause up when STANDBY-ON button is a problem before ? The power plug is not Correction fully ?F inserted. insert the unit's power ully plug into a power socket. light ? pressed. No sound from Front service. contacting Cause Symptom LED indicator does not of ? Press the POWER button POWER button is not ON. ? Connections ?M ake are faulty incomplete. or sure securely. the connections are function- ing.
Specifications Power Power [Genral] Refer to main label supply consumption Mass External dimensions (W x H x D) conditions [Video] [Tuner] AM [MW] kg 360 x 82 344 x Temperature: Video output 1.0 V S-video (Y) (C) (Y) (C) at the bottom at the bottom cover) cover) mm 5°C to 35°C, Operation status: Horizontal 5% to 85% (p-p), 75 Ω, negative sync., RCA jack x 2 (p-p), 75 Ω, negative sync., RCA jack x 1 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin 0.3 V (p-p), 75 Ω 1.
DV7142FDM_JABSNLS
Table of Contents Introduction TableofContents..........................2 BeforeUse..............................3-4 PlayableDiscs...........................3 Precautions.............................4 NotesonDiscs..........................4 AboutSymbols..........................4 .5 FrontPanelandDisplayWindow. . . . . . . . . . . . . RearPanel................................6 Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA Disc NotesonMP3/WMARecordings. .
Before Use Playable Disc-related terms Discs Title DVD video discs (8cm/12cmdisc) DVD audio discs (DVD video discs The main film content only) accompanying or feature content additional feature content, or music album. Each title is assigned a title reference number or you to locate it enabling easily.
Before Use (Continued) Storing Precautions After the unit Handling shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When The setting up the unit The picture and sound of a When nearby TV, VCR, or radio during playback. In this case, position may be distorted the unit away from the TV, VCR, unit after removing the disc.
Front Panel and Display Window PLAY(2) playback. Starts PAUSE(;) Pause playback temporarily/ press repeatedly for frame-by-frame playback. INTRODUC STOP(9) Stops playback. Reverse Skip/Scan ( Q / S ) Go to beginning of current chapter/track Power indicator Lights green when the DVD player is turned on. PREVIOUS or to chapter/track. Press and hold for two seconds for a fast reverse search. POWER Switches the Forward Skip/Scan ( T / R Go to NEXT chapter/track. player ON and OFF.
Rear Panel COAXIAL (Digital audio out jack) Connect to digital (coaxial) audio equipment. AUDIO OUT (Left/Right) Connect to an amplifier, receiver, or stereo system. VIDEO OUT Connect to a TV with video inputs. 5.1 CHANNEL AUDIO OUT Connect to -- -- -- -- center a 5.
Connections Tips Depending Progressive Scan (ColorStream If your television is your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections on video resolution Please refer to the manuals of your TV, VCR, Stereo or other devices as necessary to make the best connections. reproduction, connect jacks to the audio in jacks the player's of your audio/video equipment.
Connections Connecting (Continued) Optional Equipment to Notes -- Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and DVD Player to the amplifier, receiver, cables (A). Right AUDIO OUT jacks on the right in jacks on your stereo system, using the audio audio left and or -- --To Connect one of the DVD Player's DIGITAL AUDIO jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier.
Before Operation Caution: the remote control, press the DVD button to select the device to be operated. Before using General or TV gives DVD Some DVDs numbers basic instructions for operating the Player. require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD Player or is not available on the disc. General screen.
Before Operation (Continued) On-Screen Display (Continued) d DVD-A Items Group Function (Press 3/4 to select desired item) Number 2/6 Track Number 1 /12 Time search 0:10:15 DVD Audio Output 1PPCM mode Shows the current group number and total number of groups, and skips to the desired group number. 1/2,or Numbers, ENTER Shows the current track number and total number of tracks, and skips to the desired track number. 1/2,or Numbers, ENTER Shows the elapsed playing time.
Before Initial You Operation (Continued) Picture Settings set your own Personal Preferences on the can player. TV Aspect nected. Initial 1 DVD-V Settings General Operation The setup Displays above and below the appears. Scan is English 16:9 Wide: Select when Disc Menu French Rating German Disc Audio 4:3 Letterbox Spanish Disc Subtitle 4:3 Panscan Italian Disc Menu 16:9 Wide Code Aspect Language Scan Audio Output Speaker Setup played off).
Before Operation (Continued) Sound Others Audio Digital Output Each DVD disc has of audio output variety options. player's Digital Audio Output according to the Set the a type of audio system you use. DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" The DRC, Vocal, PBC and Auto be changed. between On and Off. Dolby Digital decoder). Stream/PCM: Select "Stream/PCM" if you connected the DVD Player's DIGITAL OUT jack to an amplifier or other DTS decoder, MPEG decoder.
Before Operation (Continued) Parental Control Rating DVD-V Enter the code of DVD-V Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain Code Country the disc.
Operation Playing a with DVD and Video CD DVD and Video CD Playback Setup Turn on DVD-V VCD2.0 DVD-A the TV and select the video nected to the DVD General Features input Note VCD1.1 source con- player. available Audio system: Turn on the audio system and select the input source connected to the DVD player. 1 2 3 Load your chosen disc in the tray, with the playback side down. automatically.
with DVD and Video CD Operation General Features Still Picture and DVD-V 1 Press PAUSE/STEP The 2 You can will VCD1.1 pressing The Repeat Track icon appears repeat the group second time. a during playback. The repeatedly by the remote on con- Note 2 To VCD2.0 U or u the TV on on the TV screen. a third time. screen. Repeat Track/All/Off press REPEAT. currently playing, on the TV screen. repeat the disc currently playing, press REPEAT VCD1.
Operation with DVD and Video CD General Features 3D Surround This unit produce can VCD2.0 DVD-V a The Marker number will be erased from the list. 3D SUR NORM. VCD1.1 Press CLEAR. 3 (continued) 4 3D Surround effect, which playback from two To remove the MARKER SEARCH menu, press SEARCH. 5 simulates multi-channel audio conventional stereo five more speakers, instead of the speakers normally required to listen to multi- channel audio from a or during playback.
Operation with DVD and Video CD DVD Audio Discs DVD-A Viewing another PAGE Since DVD Audio discs DVD Audio is building on the success of DVD to provide high quality, uncompressed, multichannel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself. a new disc format DVD Audio can provide higher quality stereo than Audio sampling rate of up to 192kHz (compared to 44.1kHz for CDs).
with Audio CD and MP3/WMA Disc Operation Playing an Audio CD and MP3/WMA Disc CD MP3 The DVD Notes MP3/WMA Insert play Recordings files that have The player can not read an MP3 file that has a file extension other than ".mp3". a About WMA(Window Media Audio) An WMA file is JPEG MP3/WMA Disc limited Press 3/4 to select the MP3/WMA then press ENTER. The MP3/WMA menu appears on the TV screen. Press RETURN to choice menu. 1. 2. 4.
Operation Pause CD with Audio and MP3/WMA Disc MP3 1 Press PAUSE/STEP WMA during playback. 2 To return to playback, PAUSE/STEP again. Moving Repeat press PLAY to another Track Press SKIP/SCAN . or > Press SKIP/SCAN . twice the previous track. case MP3 WMA briefly during or to return to the briefly step back to to of audio CD, to go directly to any track, enter using the numbered buttons (0-9) during playback. Repeat Track/All/Off CD MP3 WMA starting point.
Operation Viewing with JPEG Disc JPEG disc a Moving JPEG Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. This DVD Insert a appears on > once during viewing a previous file. Still Picture 1 Press PAUSE/STEP menu or to advance to the next file or to the picture disc and close the tray. The MP3/WMA-JPEG choice TV to another File Press SKIP/SCAN . the screen. slide show. during go into PAUSE mode.
Programmed Playback CD VCD2.0 with Audio CD Programmed Playback VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program with Video CD Note On a setup Video CD with PBC, you must set PBC to Off on the menu to use the Program function. See page 12. contain 30 tracks. can Press PROGRAM 1 WMA Programmed Playback and MP3/WMA Disc The MP3 during playback or in Program Edit mode.
Additional Information Last Condition DVD-V This DVD-A VCD1.1 memorizes the player Video Mode Memory CD DVD-V user settings Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the means If you load a disc that has its settings memorized, the latest stop position is automatically recalled. player. video mode. To change the video mode, press and hold DISPLAY about 3 seconds during disc playback.
Troubleshooting Check the following guide for the possible cause of a before problem contacting service. Cause Symptom Correction No power. The power cord is disconnected. Plug the power securely. The power is on, but the DVD player does not work. No disc is inserted. Insert a disc. (Check that the DVD or, audio CD indicator in the display No The TV is not set to receive DVD picture. signal output. window is lit.
Speaker Settings Make the following settings for the built-in 5.1 channel surround decoder. If you connected speakers to your DVD Player, setting the Distance lets the speakers know how far the sound Disc Audio has to travel to reach your set listening point. This allows the sound from each speaker to reach the listen- Disc Subtitle R Disc Menu Code Digital Audio Large Distance Scan (1 Press ENTER to test the Return Adjust Speaker Setup Select "5.1 Speaker Setup" using 2 While "5.
Language Code Enter the (See appropriate 11).
Country Enter the Code List appropriate code number for the initial setting "Country Code" (See page 13).
Specifications General Power Power requirements AC 110-240V consumption 14W Dimensions Mass (approx.) , 50/60 Hz 430X48X242mm(wxhxd) 2.34 (approx.) kg Operating temperature 5˚C to 35˚C Operating humidity 5%to90% (41˚F to REF NC 95˚F) System Laser Semiconductor laser, Signal system PAL/NTSC Frequency DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto22kHz response wavelength 650 nm CD:8Hzto20kHz ratio Signal-to-noise (ANALOG OUT More than 100dB Harmonic distortion Less than 0.
SAFETY PRECAUTION THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS POWER SUPPLY WHEN IT IS NOT IN USE. DO NOT ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO USER SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. The working life Upon the expiry of this set is 7 years since the date of delivery to con-sumer. of the said period, it might be unsuitable for the use according to their designation.
P/N: 3834RH0045U
