LH-A6730A JA3SCLS AV RECEIVER OWNER'S MANUAL MODEL: LH-T6000 (AMP: LH-A6730A DVD Player: DV7100 Speakers: LHS-A6730T, LHS-A6730C, LHS-A6730W) Before connecting up, operating or repairing product, please read this instruction booklet carefully and completely.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute risk of electric a shock to persons.
Before Use Table of Contents Introduction Precautions SafetyPrecautions..........................2 TableofContents...........................3 BeforeUse................................3 FrontPanelButtonsandDisplayWindow . . . . . . . . .4 Handling When the unit shipping the unit RearPanel................................6 It may be convenient to keep the original shipping carton and packing materials come in handy. For maximum Preparation protection, re-pack at the factory.
Front Panel Buttons and Display Window SURROUND MODE Select STANDBY-ON FUNCTION/JOG Dial MASTER VOLUME Control(UP/DOWN) TUNING MODE REMOTE Sensor DISPLAY Window SET/MEMORY INPUT SELECT STANDBY indicator red when the receiver Lights Standby is in mode HEADPHONE Jack (off).
Remote Control Buttons MUTE POWER VIDEO1 FM/AM VIDEO2 CD/DVD Input Selector TV input Selector input Selector input Selector AUDIO INPUT(AMP)/TV AV(TV) TITLE(DVD) NUMBERS(DVD/TV) TEST TONE(AMP) BY PASS(AMP) PRO LOGIC II(AMP) DYNAMIC RANGE(AMP) MONO/STEREO(AMP) SURROUND(AMP)/ SOUND(DVD) REPEAT(DVD) REPEAT A-B(DVD) RETURN(DVD) ZOOM(DVD) CLEAR(DVD) SPEAKER MODE(AMP) PROGRAM(DVD) MARKER(DVD) VOLUME(+/-) PRESET(+/-)(AMP)/ SLOW(DVD) SEARCH(DVD) DELAY(AMP)/ MENU(DVD) LEVEL(AMP)/ SETUP(DVD) CUR
Rear Panel FM 75Ω Coaxial Antenna Connector SPEAKER Connectors AM Antenna Connectors VIDEO1 Input Connectors VIDEO2 Input Connectors DVD Input Connectors TV Input Connectors VIDEO1 Output POWER Connectors MONITOR OUT Connector SUBWOOFER PRE OUT S-VIDEO OUT Connector Connector 6(5.1) CHANNEL AUDIO OUT Connect to -- 6(5.
Antenna Connections Connect the supplied FM/AM antennas loop antenna to the Connect the AM for listening to the radio. AM antenna connector. Connector the FM wire antenna to the FM 75Ω coaxial connector. FM Wire antenna AM (supplied) Loop antenna PREATION (supplied) otes To prevent noise pickup, keep the AM loop Be sure After antenna away from the AV Receiver and other fully extend the FM wire antenna. connecting the FM wire antenna, keep it components.
Connecting Make the one of the capabilities Tips Depending to to a TV following connections, depending existing equipment. on of your Connection 1 Connect the MONITOR OUT jack Receiver to the video in on video cable on your TV and other equipment you wish are various ways you could connect connect, there 2 the AV Receiver. Please refer to the manuals of your TV, VCR, Stereo or other devices as necessary to make the best connections. Caution the AV Receiver is connected TV.
Connecting to Video Equipment Rear of VCR1 VIDEO OUTPUT AUDIO OUTPUT L R VIDEO INPUT L OUT PREATION R L A V A S-VIDEO AUDIO INPUT S Rear of AV receiver Rear of VCR2 VIDEO OUTPUT or LDP AUDIO OUTPUT L R Connection 1 Connect VCR1's audio and video out VIDEO1 IN jacks on the AV Receiver audio and video cable in jacks on Connect the 2 IN LDP jacks to the the The audio and video the VCR1 should be connected to the VIDEO1 OUT 2 VCR2, (A, V).
Connecting to Optional Equipment Rear of DVD player (or Digital Device, etc) VIDEO OUTPUT R L AUD OOU A OPTICAL PUT COAXIAL D GITAL OUTPUT V O X Rear of AV receiver Connection If the equipped with COAXIAL or OPTICAL DIGITAL OUT jacks, connect them to to the corresponding input jacks of the AV auxiliary devices (e.g. DVD) are Receiver.
Connecting Analog to Optional Equipment (Cont'd) connection to connectors a multi-channel A/V receiver with 6(5.1) Channel (Dolby Digital) This AV receiver contains a multi-channel decoder. This enables Surround without the need for an optional playback of DVDs recorded in Multi-channel decoder. PREATION Rear of DVD player C F R 1 Connect the CENTER and WOOFER jacks for the speaker and the Subwoofer (C) to the corresponding in jacks on your receiver.
Assembling The front and front and rear and Connecting to the speakers are detached from the speaker speakers from speaker stands as illustrated. rear Speakers stands. Connect the speaker cords and assemble the How to connect the use Connect the cords to the nals on After speaker use connecting terminals on 12 speaker to the stand appropriate termirear speaker.
Connection Speaker System Connect the speakers using To obtain the best possible the supplied speaker surround sound, cords. adjust the speaker parameters (distance, level, etc.). Front Speaker (Right) Front Speaker (Left) If you feel lack of bass frequency Connect an PREATION active subwoofer to the WOOFER PRE-OUT connector using a monaural audio cord (not supplied). When you connect an active subwoofer, disconnect the woofer from the SUBWOOFER speaker connector.
Speaker Positioning In the case of normal position use the 6 front speakers (2 speakers, centre speaker, 2 rear speakers and sub- woofer). If you want to subwoofer. ? ? play the excellent bass sound, DTS Front speakers According to your listening position speakers to 45 degree. Centre speaker speakers The centre ? and front set up the speakers are digital for speakers ideally the surround equal same or Dolby Digital surround, distance. And height.
Speaker Settings Delay After you have installed this unit and connected all the components, you first perform the speaker setup setfor the optimum sound acoustics according environment and speaker layout. tings to your In Dolby Digital Turn on ers is Dolby If not then equal. center the unit. or Setting Pro Logic mode it is assumed that the distance from the listener to each of the or rear neously by 1 2 control.
Delay Time Setting (Cont'd) C WIDTH Setting the delay time in the Dolby Digital and Dolby Pro Logic (II) mode The current surround time appears in the delay Display Window. 2 Press 3 If / to change the time. delay posispeaker and the left/right speakers over a range of eight steps. Step "3" uses a combination of all three front speakers to give the best vocal imaging and most seamless soundstage presentation, and is recommended for most recordings.
Sound Level You can Test Tone set the sound level of the desired channel. Press AMP and press LEVEL 1 on the remote control. 2 The level indicator will appear in the Display Press speaker / to select a desired Each time you press the in the / Window. This function allows you to can easily adjust the sound balance of the speakers from the listener's position. Select the test tone mode 1 A hiss noise to set.
Mini Glossary for Sound Mode (II) Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources bearing the trademark such as ers discs, DVD and compact discs, etc. DTS Digital Surround delivup to 6 channels of transparent audio(which means identical to the original masters) and results in exceptional clarity throughout a degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC.
Sound Mode You Adjusting Dynamic Range enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Press SURR. repeatedly until the sound mode you want appears in the display window as below. Each time you press SURR.
OSD Menu Settings The OSD(On-screen display) menu allows you to persetup procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later. form the Press OSD 1 on 1 When selecting Press / INPUT the INPUT SELECT the remote control to select the on ENTER. SELECT, then press the remote control.
OSD Menu When selecting the TONE CONTROL Press 1 TONE Settings (Cont'd) / on 3 / one the remote control to select the your speaker type, you following speaker types. on of these ENTER. LARGE: Select this when SELECT SPEAKER MODE cannot fully CONTROL EXIT MENU that connecting speakers that reduce sounds below 80 Hz. When this is LEVEL TONE select connecting speakers SMALL: Select this when OSD MENU INPUT can reduce sounds below 80 Hz.
with Radio Operation Presetting You can ing, make that you have turned down the volume. By using 1 on Press TUNING MODE twice until the frequency on the front band appears in the panel Display Window. the Remote control Press FM/AM 1 the Front Panel By using 30 stations for FM and AM. Before tun- preset sure the Radio Stations The word FM or AM will blink in the Display Window. the remote control to select desired band.
Operation with Radio Other (Cont'd) to the Radio Listening Sleep Preset radio stations in the AV receiver's memory first (see "Presetting the radio stations" on page 22.) You 1 Press FM/AM on 2 Setting automatically at a time. Press SLEEP to set the desired The SLEEP indicator and play the remote control. The last received station is tuned in. Timer set the AV receiver to turn off can specified 1 Operations sleep sleep time. time appears in the dis- window.
Troubleshooting Check the following guide for the possible cause up when STANDBY-ON button is a problem before ? The power plug is not Correction fully inserted. insert the unit's power Fully ? plug into a power socket. light ? POWER button is not ON. ? ? Connections ? pressed. No sound from Front service. contacting Cause Symptom LED indicator does not of are faulty incomplete. or Press the POWER button Make sure securely. the connections are function- ing.
Specifications Power Power [Genral] External dimensions (W x H x D) conditions [FM] AM [MW] kg 360 x 82 344 x Temperature: Video 1.0 V S-video output at the bottom cover) cover) mm 5°C to 35°C, Operation status: Horizontal (Y) (C) (Y) (C) (p-p), 75 Ω, negative sync., RCA jack x 2 (p-p), 75 Ω, negative sync., RCA jack x 1 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin 0.3 V (p-p), 75 Ω 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin 0.3 V (p-p), 75 Ω REF NC 1.
DV7142FDM_JA3SCL DVD PLAYER
Table of Contents Introduction TableofContents..........................2 BeforeUse..............................3-4 PlayableDiscs...........................3 Precautions.............................4 NotesonDiscs..........................4 AboutSymbols..........................4 .5 FrontPanelandDisplayWindow. . . . . . . . . . . . Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA Disc NotesonMP3/WMARecordings. . . . . . . . 18-19 . . . . . . . . . .
Before Use Playable Disc-related terms Discs Title (DVD video discs The main film content DVD video discs or only) accompanying feature content additional feature content, or music album. Each title is assigned a title reference number or (8cm/12cmdisc) DVD audio discs you to locate it enabling easily.
Before Use (Continued) Storing Precautions After the unit Handling When shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. The When setting up the unit The picture and sound of a nearby TV, VCR, or radio during playback. In this case, position may be distorted the unit away from the TV, VCR, unit after removing the disc.
Front Panel and Display Window PLAY(2) playback. Starts PAUSE(;) Pause playback temporarily/ press repeatedly for frame-by-frame playback. INTRODUC STOP(9) Stops playback. Skip/Scan ( Q / S ) beginning of current chapter/track PREVIOUS chapter/track. Reverse Power indicator Go to Lights green when the DVD player is turned on. Press and hold for two seconds for a or fast to reverse search. POWER Forward Switches the Skip/Scan ( T / chapter/track. R ) Go to NEXT player ON and OFF.
Rear Panel COAXIAL (Digital audio out jack) digital (coaxial) audio equipment. Connect to AUDIO OUT Connect to or stereo (Left/Right) amplifier, receiver, an system. VIDEO OUT Connect to a TV with video inputs. 5.1 CHANNEL AUDIO OUT Connect to -- -- -- -- center a 5.
Connections Tips Depending Progressive Scan (ColorStream If your television is your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections on video resolution Please refer to the manuals of your TV, VCR, Stereo or other devices as necessary to make the best connections. the reproduction, connect jacks to the audio in jacks player's of your audio/video equipment.
Connections Connecting (Continued) Optional Equipment to Notes -- Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and DVD Player to the amplifier, receiver, cables (A). Right AUDIO OUT jacks on the right in jacks on your system, using the audio audio left and or stereo digital output does not match capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
Before Operation Caution: Before the remote control, press the DVD button to select the device to be operated. using General or TV gives DVD Some DVDs numbers Temporary operating the Player. require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD Player or is not available on the disc. basic instructions for TITLE General screen.
Before Operation (Continued) On-Screen Display (Continued) d DVD-A Items Group Function (Press 3/4 to select desired item) Number 2/6 Track Number 1 /12 Time search 0:10:15 DVD Audio Output 1PPCM mode Shows the current group number and total number of groups, and skips to the desired group number. Shows the current track number and total number of tracks, and Shows the skips to the desired track number.
Before Initial You Operation (Continued) set your can Picture Settings Personal Preferences own on the player. TV Aspect nected. Initial 1 DVD-V Settings General Operation The setup Displays above and below the appears. Scan is English 16:9 Wide: Select when Disc Menu French Rating German Disc Audio 4:3 Letterbox Spanish Disc Subtitle 4:3 Panscan Italian Disc Menu 16:9 Wide Code Aspect Language Scan Audio Output played off).
Before Operation (Continued) Sound Others Audio Digital Output Each DVD disc has Set the of audio variety output options. player's Digital Audio Output according to the a type of audio system you The DRC, Vocal, PBC and Auto be changed. between On and Off. DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" a Dolby Digital decoder). Stream/PCM: Select "Stream/PCM" if you connected the DVD Player's DIGITAL OUT jack to an amplifier or other DTS decoder, MPEG decoder.
Before Operation (Continued) Parental Control Rating DVD-V Enter the code of DVD-V Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain Code Country the disc. These scenes on scenes are Disc Audio Rating Country TV Disc Subtitle 7 Disc Menu 6 Digital Country TV Menu Code 3 Progressive 5.
Operation Playing a with DVD and Video CD DVD and Video CD Playback Setup Turn on the 1 2 3 VCD2.0 DVD-A the TV and select the video nected to the DVD Audio DVD-V source input Note VCD1.1 source con- player. system: Turn input General Features on the audio available system and select connected to the DVD tray, with the starts automatically.
with DVD and Video CD Operation General Features Still Picture and DVD-V 1 Press PAUSE/STEP The Repeat VCD1.1 during playback. 1 To will now go into PAUSE mode. advance the picture frame-by-frame can PAUSE/STEP pressing DVD-A repeatedly on VCD2.0 GROUP TITLE DVD Video Discs player 2 You DVD-V CHAPT Frame-by-Frame playback VCD2.0 DVD-A (continued) VCD1.1 TRACK ALL OFF Repeat Chapter/Title/Off - repeat the currently playing chapter, press REPEAT.
Operation with DVD and Video CD General Features 3D Surround This unit produce can VCD2.0 DVD-V a 3 (continued) 3D SUR NORM. VCD1.1 4 3D Surround effect, which playback from two conventional stereo five more speakers, instead of the speakers normally required to listen to multi- a home theater again 5 To during playback. effect, press SOUND DVD-V VCD2.0 DVD-A during playback If you press ZOOM increases up to six VCD1.1 press the appropriate number button to select an option.
Operation with DVD and Video CD DVD Audio Discs DVD-A Viewing another PAGE Since DVD Audio discs DVD Audio is building on the success of DVD to provide high quality, uncompressed, multichannel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself. a new disc format DVD Audio can provide higher quality stereo than Audio sampling rate of up to 192kHz (compared to 44.1kHz for CDs).
with Audio CD and MP3/WMA Disc Operation Playing an Audio CD and CD MP3 The DVD ings Player can play or read the notes files that have on disc and close the tray. CD; Audio CD menu appears on the TV screen go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 The player can not read an MP3 file that has file a ".mp3".
Operation with Audio and MP3/WMA Disc CD Pause MP3 1 Press PAUSE/STEP WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To 1 press repeat CD to another Track Press SKIP/SCAN . or > Press SKIP/SCAN . twice In previous case WMA briefly during step back to briefly sequence. Repeat icon and "A Repeat press REPEAT A-B at your cho* " appears again the on menu screen. at your chosen end point.
Operation Viewing with JPEG Disc JPEG disc a Moving JPEG This DVD Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert 1 a disc and close the The MP3/WMA-JPEG choice TV to another File Press SKIP/SCAN . 1 Press PAUSE/STEP appears on > once or during viewing a previous file. to the Still Picture tray. menu or to advance to the next file picture the screen. The will slide show.
Programmed Playback CD VCD2.0 with Audio CD Programmed Playback VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program mode to enter the during playback or in Program Edit mode. the stop E The mark will appear to the right of the word the right side of the menu screen. on with Video CD Note On a setup Video CD with PBC, you must set PBC to Off on the menu to use the Program function. See page 12. contain 30 tracks.
Additional Information Last Condition DVD-V This DVD-A VCD1.1 memorizes the player Video Mode Memory CD DVD-V user settings for the last disc means Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the If you load a disc that has its settings memorized, the latest stop position is automatically recalled. player. video mode. To Notes -- VCD1.
Troubleshooting Check the following guide for the possible cause of a before problem service. Cause Symptom Correction No power. The power cord is disconnected. The power is on, but the DVD player does No disc is inserted. Plug the power securely. Insert a disc. cord into the wall outlet (Check that the DVD or, audio CD indicator in the window is not work. No contacting The TV is not set to receive DVD picture. signal output.
Speaker Settings Make the following settings for the built-in 5.1 channel surround decoder. If you connected speakers to your DVD Player, setting the Distance lets the speakers know how far the sound Disc Audio has to travel to reach your set listening point. This allows the sound from each speaker to reach the listen- Disc Subtitle R Disc Menu Code Digital Audio Large Distance Scan same time. (1 ft = 30.
Language Code Enter the (See appropriate 11).
Code List Country Enter the appropriate code number for the initial setting "Country Code" (See page 13).
Specifications General Power Power requirements AC 110-240V consumption 14W Dimensions Mass (approx.) , 50/60 Hz 430X48X242mm(wxhxd) 2.34 (approx.) kg Operating temperature 5˚C to 35˚C Operating humidity 5%to90% (41˚F to REF NC 95˚F) System Laser Semiconductor laser, Signal system PAL/NTSC Frequency DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto22kHz response wavelength 650 nm CD:8Hzto20kHz ratio Signal-to-noise More than 100dB (ANALOG Harmonic distortion Less than 0.
P/NO: 3834RH0023G
