Installation and Operating Guide | Warranty Model Number | LH-C6237 | DVD+Hi-Fi VCR (Speakers: LHS-C6237T/LHS-C6237W) P/N: 3828R-D032Q System
Safety Precautions FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER'S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE. This has been designed and manufactured to assure personal safety. Improper use can result in electric safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing. This product does not contain any parts that can be repaired by the user.
Table of Contents Search.............................30 Introduction .3 Repeat.............................30 RepeatA-B.........................30 TableofContents..........................4 TimeSearch........................30 BeforeUse..............................5-6 3DSurround........................30 Zoom..............................30 SafetyPrecautions.........................2 IMPORTANTSAFETYINSTRUCTIONS. . . . . . . . . PlayableDiscs...........................5 Precautions..........
Before Use Disc-related Terms Discs Playable Title (8 cm/12 cm disc) Each title is (VCD) (8cm/12cmdisc) In addition, this unit and CD-Rs JPEG or or can cm play SVCD, disc) Kodak PICTURE CD-RWs that contains audio CD, titles, MP3, WMA files. (Video Sections of Depending -- the conditions of the the CD-R/RW ment or itself, some cannot be -- CD-R/RW played on recording equip(or DVD-RW, DVD+RW) disc (or DVD-RW, DVD+RW) discs the unit.
Before Use (Continued) Cleaning Precautions the unit Handling the unit away from the TV, VCR, unit after removing the disc. Do not near or radio, volatile liquids, such leave marks a Yes No Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static as the unit. Do not leave rubber contact with the unit for ter outward.
Front Panel Control Functions OPEN/CLOSE Opens and closes the disc (Z) EJECT(Z) tray. Ejects Remote Sensor a tape in the VCR deck. PAUSE/STEP(X/C) Point the remote control here. Pause playback of a tape disc in the DVD or a or VCR deck Disc a for temporarily/press repeatedly Tray (DVD deck) Insert disc here. frame-by-frame playback. STOP MONO/STEREO Selects stereo or mono for FM of Stops playback mode INTRODUC (x) disc a or tape. tuning.
Window Indicators Display A disc is loaded in the DVD deck. (Lights when a disc is loaded in the DVD deck and flashes when the disc is Indicates current DVD+Hi-Fi VCR is in VCR timer audio stream. or a VCR timer recording mode. recording programmed. DVD+Hi-Fi VCR is Indicates the current Recording playing a tape. back a tape recorded in Hi-Fi. up when an SAP BILINGUAL broadcast Lights being mode Indicates the unit is surround mode. is is DVD to VCR copy is in progress.
Remote Control Button Functions FM/AM Tuner select Select FM or AM band choice. Switches DVD+Hi-Fi VCR ON and OFF. listening AM bands) and (FM POWER the as VIDEO 1/2 Select OPEN/CLOSE, EJECT (Z) - - Opens Ejects and closes the disc tray. tape in the VCR deck. a input source. MUTE Turns the sound and off on temporarily. CD/DVD/VCR select Selects the output VCR) source to view on (CD/DVD the TV or screen. SOUND MODE EJECT OPEN/CLOSE Selects sound mode.
Rear Panel Connections VIDEO 1 (VIDEO IN/AUDIO IN MONITOR OUT (Left/Right)) Connect to a TV or MONITOR Connect the audio/video source output of an external (Audio system, TV/Monitor, another S-VIDEO OUT Connect to an S-Video VCR). (DVD OUT) Input on TV. FOR DVD VIEWING ONLY. AC Power Cord Plug SPEAKER CONNECTORS Connect the six supplied speakers into the power source. to these terminals.
Connections Without Cable Box ips your TV and other equipment you wish to connect, there are various ways to connect the DVD+Hi-Fi Depending on VCR. Use connections described pages 11-13. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best on connections. sure it to the ANTENNA/CABLE IN Use the supplied jack on the DVD+Hi-Fi VCR.
Connections (Continued) Progressive Scan (ColorStream Basic TV Connections Make of the following connections, depending capabilities of your existing equipment. the one If your television is on resolution or jack on the jack on the TV supplied (R). DVD+Hi-Fi VCR to the ANTENNA in possible. Connect the COMPONENT VIDEO OUT ote DVD+Hi-Fi VCR to the If you use this connection, tune the TV to the DVD+HiFi VCR's RF output channel (CH 3 or 4). TV How to set the DVD+Hi-Fi VCR's RF 1.
Connections Accessory (Continued) Audio/Video (A/V) Connections to DVD+Hi-Fi VCR Connect the VIDEO 1 or VIDEO 2 jacks the on DVD+Hi-Fi VCR to the AUDIO/VIDEO OUT jacks Accessory Device Jack Panel on AUDIO OUTPUT SYTEM UP your accessory component, cables.
Connections (Continued) Speaker System Connections Connect the speakers using To obtain the best possible the supplied speaker surround cords. sound, adjust the speaker parameters; distance, level, Center etc..
Glossary for Audio Stream & Surround mode Sound Mode Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc. bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS LLC. Manufactured under license from DTS Technology, Technology, LLC.
VCR Operation Setup On-Screen EASY INFORMATION Display (OSD) Some of these functions appear during If the Extended Data Service VCR operated. along with normal TV back of a tape (XDS) signals, PLAY HI-FI CH 4 SP details are the station shown When STEREO viewing signals, press a (XDS) signals are provided in your area or during playrecorded with Extended Data Service signal on ID, program title, and program the TV screen.
VCR VCR Operation Setup (Continued) Menu Setup Press MENU and the MAIN 1 Channel Selection Options will appear. menu This DVD+VCR is synthesized Use v/V to select the SETUP menu, then press MEMORY/ENTER. 2 The SETUP menu tuner equipped with a frequency capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Preparation: will appear.
VCR Operation Setup (Continued) Setting the Clock ote The DVD+Hi-Fi VCR gives you two ways to set the time and date: the Auto Clock Feature or manually. The Auto Clock feature enables the DVD+Hi-Fi VCR to set up the There If this clock while the DVD+Hi-Fi VCR is turned off. Things The clock to know before 12:00 AM. 1 2 Auto Clock Set The Auto Clock Set feature is set to ON at the ON setting, the DVD+Hi-Fi VCR looks for a (Extended Data Services) information.
Before DVD General This manual Operation Temporary Explanation the basic instructions for gives operating require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD+Hi-Fi VCR. Some DVDs the DVD+Hi-Fi VCR or is not available on the disc.
DVD Operation Setup (Continued) Initial Picture Settings You can set your DVD+Hi-Fi VCR. Personal Preferences own on the TV Aspect nected. General 1 Operation Setup DVD Displays above and below the appears. Scan is style picture are Disc Subtitle English 16:9 Wide: Select when Disc Menu French Rating German Code Country Aspect Language Progressive played off).
Before Operation (Continued) Speaker Setup 5.1 Auto Speaker settings You DVD Play can DVD set up the DVD/CD receiver so a DVD disc starts playing whenever the DVD is insert- automatically Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setup", page 36.) ed.
Before Operation (Continued) Parental Control Rating Movies DVDs may contain on scenes not suitable for Therefore, discs may contain Parental Control information that certain DVD Enter the code of DVD children. Code Country to the applies complete the disc. These scenes on disc from 1 to 8, and alternatively, more suitable scenes available for selection on some discs. Ratings are are TV Menu 6 5 Rating 1 4 Code 3 Aspect Scan 1 Unlock 5.
VCR Operation Normal Preparation: Turn Tune the TV to the DVD+Hi-Fi VCR 4) If or a set the TV's source TV, set the TV's source Set the Output Source to VCR Source on Insert a or as indicator will power-up automatically. Make sure that the a the and the DVD+Hi-Fi VCR will indicator in the lighted. If it is, a safety tab playback automatically. tape without start Setting Press PLAY ( B) once. PLAY appears on the TV display press POWER once.
VCR Operation (Continued) Normal Timer Recording This DVD+Hi-Fi VCR Preparation: Turn on the power of both the DVD+Hi-Fi VCR and TV. Tune the TV to the DVD+Hi-Fi VCR output channel (CH 3 4) set the TV's If or a or selector to VIDEO. source recorded and the direct VIDEO/AUDIO connection is made between the DVD+Hi-Fi VCR and the set the TV's TV, source Insert a safety tab intact.
VCR 10 Operation (Continued) V to Use choose the SPEED option. recording otes Use b/B to choose the desired speed (AUTO, SP or If the power fails or the DVD+Hi-Fi VCR is unplugged from the AC outlet, the correct clock time and timer set- SLP). AUTO mode determines how much tape is left and tings switches speed from SP to SLP, if necessary, to complete recording the program. There will be some picture and sound distortion at the point of the speed change.
VCR Operation (Continued) Instant Timer Recording Instant Timer of easily a Recording preset length allows you to make a recording without using the programma- ble timer. Preparation: Turn Be or If on sure the power of both the DVD+Hi-Fi VCR and the TV. the TV is tuned to the DVD+Hi-Fi VCR output channel (3 4).
VCR Operation (Continued) VHS Hi-Fi Stereo MTS System/ TV (Multi-Channel Sound) This DVD+Hi-Fi VCR will decode MTS stereo and bilin- MTS Broadcast signals. It also companies, as long as they operate on assigned cable frequencies and use the EIA-recommended MTS stereo/bilingual TV gual (SAP) This DVD+Hi-Fi VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback.
VCR Operation (Continued) Tape Counter Memory Feature Additional Information In manual recording, Timer recording, Instant Timer Recording, playback, or fast forward modes, the DVD+Hi-Fi VCR automatically starts rewinding the tape at the end of the tape. The cassette will stop at the beginning of the tape and be ejected, and the DVD+Hi-Fi VCR will turn itself off. Real-Time Counter Shows length of tape in run hours, minutes, and seconds. Press CLK/CNT to select the real-time counter display.
DVD and Video CD Playing a on General Features DVD and Video CD Playback Setup Turn Operation DVD VCD2.0 VCD1.1 ote the TV and select the video input source con- nected to the DVD+Hi-Fi VCR. Audio system: Turn on the audio input source connected to the Set the Output Source to DVD as the Output Source on page 6. Press OPEN/CLOSE (Z) 1 Load chosen disc 2 facingyour up. 3 play Press OPEN/CLOSE (Z) is In to select Moving tray.
DVD and Video CD General Features Still Picture and DVD VCD2.0 DVD, you (X) during playback. pressing can Search (X) repeatedly ( N). on VCD2.0 by the remote control. The DVD+Hi-Fi VCR will now FORWARD (>) for 2 Press and hold BACKWARD FORWARD (.) (>) required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8, (forward). To return to playback, press PLAY ( N).
DVD Operation (Continued) General Features Marker Search (Continued) VCD2.0 DVD VCD1.1 discs: Menus You can start playback from a memorized nine points can be memorized. To enter a mark, follow these steps. 1 point. Up to disc playback, press MARKER when playback reaches the spot that you want to memorize. During The Marker icon will appear 2 Repeat step disc. on the TV briefly.
Audio CD and MP3/WMA Disc Playing Audio CDs and MP3 CD Operation MP3/WMA Discs can An MP3 file is audio data MP3/WMA formatted play recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes MP3/WMA Recordings on right. Insert a disc and close the tray. Audio CD; Audio CD menu appears 1 on files that have on the TV The the TV on screen. Go to step MP3/WMA Disc Use 3/4 to select the MP3/WMA then press ENTER. The MP3/WMA menu appears on the TV screen.
Audio CD and MP3/WMA Disc Pause MP3 CD 1 Press PAUSE/STEP Operation (Continued) WMA Repeat (X) during playback. 2 To return to playback, press PAUSE/STEP (X) again. PLAY (N) To or 1 press repeat other Tracks MP3 CD Press BACKWARD . or FORWARD > Press BACKWARD . twice the previous On Audio briefly or briefly to return to step back to CDs, to directly to any track, enter the the numbered buttons (0-9) dur- to go using Repeat ing playback.
JPEG Disc Operation Viewing JPEG This DVD+Hi-Fi VCR and Kodak the notes 1 picture a can discs with JPEG files play CDs. Before playing right. on JPEG files, read 1 Press PAUSE/STEP menu > or while once to advance to the next file picture or to the viewing a previous file. Still Picture disc and close the tray. The MP3/WMA-JPEG choice TV Files Selecting JPEG Press SKIP/SCAN . JPEG Files on Insert files appears the on screen.
Programmed Playback Programmed Playback CD VCD2.0 with Audio CDs On a setup Press PROGRAM mode to enter the E The on the Video CD with menu to PBC, you the use must set PBC to Off on the function. See page 21. Program contain 30 tracks. can Insert Video CD and close the tray. 1 1 with Video CD ote function enables you to store your favorite tracks from any disc in the player memory. Program Program WMA Programmed Playback and MP3/WMA Discs The MP3 VCD1.
Speaker Setup Adjust the Speaker Setup menu option settings for the (Also refer to built-in 5.1 channel surround decoder. page 14, Speaker Positioning.) Speaker Selection Select a speaker that you want to set up.
Radio Operation Presetting You can ing, make Radio 30 stations for FM and AM. Before tun- preset sure Radio Stations that you have turned down the sound Preset radio stations in the DVD+Hi-Fi VCR memory (see "Presetting radio stations" on the left). first level. 1 Press FM/AM on the remote control front until the the and TV panel display band appears frequency 1 the or on Operation on screen. Press FM/AM - - - - - - RADIO FM FM FM - - - - - 1/6. 2 0MHz .
Radio Operation (Continued) Tuning Stations Manually 1 2 3 Press FM/AM on the remote control front until the the and TV panel display Use FM/AM front Use 1 panel 4 on Tuning Stations Automatically frequency or on the band appears Hold down 4 TUNING 3 on screen. or on on 3 on the front panel or press the remote control to tune in the or or hold 2 next station is searched for automati- ote The search may not tune in very weak signal.
Troubleshooting Check the following guide for the possible cause of a before problem contacting Cause Symptom Correction No power. The power cord is disconnected. The power is on, but the DVD+Hi-Fi VCR No disc is inserted. Insert No disc Plug the power securely. tape is inserted. picture. disc or tape. (Check that the tape indicator in the display The TV is not set to receive DVD+Hi-Fi Select the VCR on signal output. cord into the wall outlet a or window is does not work.
Troubleshooting (Continued) Cause Symptom Some channels Correction Those channels are skipped over when using CH/TRK (v/V) CH. ADD/DEL Picture and sound of Antenna broadcasting channel are weak or missing. Wrong or were deleted with the Use CH. ADD/DEL. to restore channels. See "Channel Selection" option. cables are TUNING BAND loose. option Tighten is being Try used. connections page 17. replace or all TUNING BAND "Channel Selection" on options. on cable.
Language Code DVD+Hi-Fi VCR List memory/enter the appropriate (See page 20).
Country Code DVD+Hi-Fi VCR List memory/enter the appropriate code number for the initial setting "Country Code" (See 22).
Specifications General Power AC Power 130W requirements consumption Dimensions (approx.) Weight (approx.) Operating temperature Operating humidity Signal system 60 Hz 120V, 430 X 90 X 350 mm (16.9 x 3.5 x 13.8 inches) (w x h x d) 8 kg (17.6 lbs) 5˚C to 40˚C (41˚F to 104˚F) REF NC 5 % to 90 % NTSC Inputs ANTENNA IN VHS VIDEO VHS AUDIO IN(LINE1, 2) IN(LINE1, 2) Antenna input, 75 ohms 1 Vp-p 75 ohms, sync negative, RCA jack x 2 -6.
Specifications (Continued) Speakers Satellite (LHS-C6237T) 1 Type Impedance Frequency Response 130 Sound Pressure Level Rated Max Net Dimensions Input Input (W x Net Way 1 Speaker 4Ω - 20,000 Hz 83 dB/W (1m) Power 20W Power 40W H 88x100x95mm D) Weight x 0.
