Owner's Manual

OPERATION
29
DVD
and Video
CD
Operation
Playing
a
DVD
and Video
CD
Playback Setup
Turn on the TV and select the video
input
source con-
nected to the DVD+Hi-Fi VCR.
Audio
system:
Turn on the audio
system
and select
the
input
source connected to the DVD+Hi-Fi VCR.
Set the
Output
Source to DVD as shown in
Setting
the
Output
Source on
page
6.
1
Press
OPEN/CLOSE
(Z)
to
open
the disc
tray.
2
Load
your
chosen disc
in
the
tray,
with the label
facing up.
When a double-sided DVD is
inserted,
make sure
the side
you
want to
play
is
facing
down.
3
Press
OPEN/CLOSE
(Z)
to close the
tray.
"READING"
appears
in the
display
window,
and
playback
starts
automatically.
If
playback
does not
start,
press
PLAY
(N).
In some
cases,
the disc menu
might appear
instead.
If
a menu screen is
displayed
The menu screen
may
be
displayed
first after
loading
a
DVD or Video CD which contains a menu.
Use b/B/v/V buttons to select the
title/chapter you
want to
view,
then
press
ENTER to start
playback.
Press TITLE or DISC MENU to return to the menu
screen.
Use the number buttons to select the track
you
want
to view.
Press RETURN to return to the menu screen.
Menu
setting
and the exact
operating procedures
for
using
the menu
may
differ
depending
on the disc.
Follow the instructions on the each menu screen.
You also
may
set PBC to Off under
setup.
See
page
21.
otes
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit password
must be entered and/or the disc must be authorized
(see
Parental
Control,
on
page 22).
DVDs
may
have a
Regional
Code.
Your DVD+Hi-Fi VCR will not
play
discs that have a
Regional
Code different from
your
DVD+Hi-Fi VCR.
The
Regional
Code for this DVD+Hi-Fi VCR is 1
(one).
Do not
keep
a fixed
image displayed
on the screen
for a
long
time.
General Features
ote
Unless stated
otherwise,
all
operations
described use
the remote control. Some features
may
also be
available on the
Setup
menu.
Moving
to another
TITLE
When a disc has more than one
title,
you
can move to
another title as follows:
Press DISPLAY in
Stop
mode,
then
press
the
appropriate
number buttons
(0-9)
then
press
ENTER
to select a title number.
Moving
to another CHAPTER/TRACK
When a title on a disc has more than one
chapter
or a
disc has more than one
track,
you
can move to another
chapter/track
as follows:
Press BACKWARD
(.)
or FORWARD
(>) briefly
during playback
to return to the
beginning
of the current
chapter/track
or to select the next
chapter/track.
Press BACKWARD
(.)
twice
briefly
to
step
back to
the
previous chapter/track.
To
go directly
to
any chapter/track during playback,
press
DISPLAY. Use v/V to select the
chapter/track
icon.
Then,
enter the
chapter/track
number with the number
buttons
(0-9).
Then,
press
ENTER.
ote
For
two-digit
numbers,
press
the numbered buttons
(0-9)in rapid
succession.
Slow Motion
1 Press PAUSE/STEP
(X) during playback.
The DVD+Hi-Fi VCR will now
go
into PAUSE mode.
2 Press BACKWARD
(.)
or FORWARD
(>)
during pause
mode.
The DVD+VCR will enter SLOW mode.
3 Use BACKWARD
(.)
or FORWARD
(>)
to
select the
required speed:
t
1/16,
t
1/8,
t
1/4,
t
1/2
(backward),
or T
1/16,
T
1/8,
T
1/4,
T 1/2
(forward).
4 To return to
playback, press
PLAY
( N).
ote
Slow motion
playback
is reverse is not
applicable
for
Video CD.
VCD1.1 VCD2.0
DVD
1/3 1 /12
VCD1.1
DVD
1/3
DVD
VCD2.0
DVD
VCD1.1 VCD2.0
DVD