LH-CX247W NA2ALLS DVD/VCR COMBI RECEIVER Combi Receiver System OWNER'S MANUAL MODEL: LH-CX247 (Main Unit: LH-CX247W Speakers: LHS-CX247T, LHS-CX247W) CD-R/RW PAL G-CODE Before please connecting up, operating or repairing this read this instruction booklet carefully and R product, completely.
CAUTION Warning: To reduce the risk of electric shock, do of this not remove There product. iceable the parts inside. Refer servicing qualified service Warning: To reduce the risk of fire electric uct to or back cover or are no user-serv- shock, do dripping to personnel. not expose this or prod- splashing water, rain, not place objects filled as vases, on the prod- or moisture.
.31-32 PlayingaDVDorVideoCD. GeneralFeatures.......................31 Contents . Introduction...................4 SymbolUsedinthisManual...............4 AbouttheSymbolDisplay..............4 NotesonDiscs..........................4 HandlingDiscs........................4 StoringDiscs.........................4 CleaningDiscs........................4 TypesofPlayableDiscs...................5 Regionalcode..........................5 Disc-relatedterms.......................6 FrontPanel............................
Introduction About the To proper use of this product, please read this owner's manual carefully and retain for future Symbol Display ensure reference. " " may appear on your TV display during operation and indicates that the function explained in this owner's manual is not available This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service on that specific DVD video disc.
Types of Playable Discs Regional code This DVD player is designed and manufacplayback of region "4" encoded DVD software. This unit can play only DVD discs DVD tured for (8cm/12cmdisc) labeled "4" Video CD (VCD) (8cm/12cmdisc) Notes Audio CD ? (8cm/12cmdisc) In addition, this unit plays on or "ALL". Regional clearly a globe visible on with the one or more cover. This number must match your DVD al code or the disc cannot play. DivX file, DVD -R, DVD +R, and/or JPEG files.
PBC: Playback Control (Video CD only) Playback control is available for Video CD (VCD) Disc-related terms DVD±R/DVD±RW DVD -R and DVD +R are two different standards for recordable DVD drives and discs. This format allows information to be recorded onto the DVD disc DVD +RW and DVD -RW once. re-writable media, are only two standards for meaning the DVD content can be Single-sided discs can hold erased and re-recorded. 4.38 Gigabytes much.
Front Panel OPEN/CLOSE Opens or (Z) EJECT(Z) closes the disc tray. PAUSE/STEP(X/C) Remote Sensor Pause Point the DVD/VCR Combi receiver remote control here. Disc Press a of playback Tray (DVD deck) Insert the tape in the VCR deck. Ejects tape a repeatedly for disc in the DVD or VCR deck temporarily. or a STOP disc here. of Stops playback a disc PLAY To play back a Introducin frame-by-frame playback. recorded tape or or (x) tape. (B) disc.
Display Indicates current A disc is loaded in the DVD deck. audio stream. loaded in the DVD WMA disc inserted (Lights when a Window disc is deck.) DVD/VCR Combi receiver is in VCR timer mode Indicates the unit is radio mode. or a VCR timer recording is recording programmed. DVD to VCR copy is in progress. DVD/VCR Combi receiver is Indicates current surround mode. Recording a tape. Indicates the unit is playing back a tape recorded in Hi-Fi.
Remote Control POWER OPEN/CLOSE, EJECT (Z) Opens and closes the disc tray. Switches DVD/VCR Combi receiver ON and OFF. 0-9 numerical buttons Selects numbered options in a menu. PROGRAM Accesses or removes Program menu. CLEAR Removes - Ejects the tape in the VCR deck. CD/DVD/VCR select buttons Select the output source (CD/DVD - EJECT OPEN/CLOSE POWER VCR) FM/AM VCR Select the DVD/VCR Combi receiver's tuner track number on the as on the AV Selects the VCR deck's menu.
Rear Panel AC Power Cord Plug into the power source. ANT.IN COMPONENT/PROGRESSIVE SCAN VIDEO OUT Connect to Pr) inputs. TV with Y Pb Pr a Connect the aerial using this jack. Pb (Y RF. OUT Connect to a TV with RF cable. DVD/VCR OUT VIDEO OUT/AUDIO OUT FM ANTENNA CONNECTOR (Left/Right)) Connect the FM antenna to this Connect to a TV with video and audio terminal. inputs.
Installation and Tips Depending Setup your TV and other equipment you wish to connect, there are various ways you could connect the unit. Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. Caution Connect the COMPONENT/ PROGRESSIVE SCAN VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable. (C) 2.
Accessory Audio/Video (A/V) Connections to DVD/VCR Combi receiver Connect the AV 3 jacks on the DVD/VCR Combi receiver to the audio/video out jacks on your accessory component, using the optional audio/video cables. Accessory Device Jack Panel Front of this unit VIDEO OUTPUT AUDIO OUTPUT R L OR Rear of this unit Radio Aerial Connections Connect the ? ? supplied FM/AM loop aerial Connect the AM aerial for listening to the radio. to the AM aerial connector.
Speaker System Connection Connect the speakers using To obtain the best possible the supplied speaker surround sound, cords. adjust the speaker parameters; distance, level, Front Speaker (Right) etc.. Front Centre Speaker (Left) Speaker InstaliodSeup Subwoofer Rear Speaker (Right Surround) Rear Speaker (Left Surround) Notes ? Be sure to match the speaker cable to the appropriate terminal the components: on + to + and -- to --.
Speaker Positioning In the of normal case position use the 6 speakers (2 front centre speakers, speaker, 2 rear speakers and subwoofer). If you want to a ? ? play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect subwoofer. Front speakers According to your listening position set up interval between speakers to 45 degree. Centre speaker speakers The centre and front speakers the speakers ideally are the for equal same distance.
Mini Glossary for Audio Stream 3D SURROUND This unit & Surround mode can produce instead of the five Allows you to enjoy 5.1(or 6) discrete channels of high a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital promark, you can gram source. If you play DVDs with enjoy even better sound quality, greater spatial accuracy, and improved dynamic range.
Before Tuning in a Operation-VCR part video channel on your TV 6. Your TV receives recorder (VCR) signals a 8 ~ RF Make VCR 7. channel number usually Press PROG. that you have correctly installed your described earlier in this book. Turn 2. on 8. Select a TV channel number STANDBY/ON VCR and play tinue stages 3 4, instead of seeing video playback tune your TV until you see a bright blue ~ on when you have finished. Tune this channel so that watch video's.
Setting the clock Manually The clock in your VCR controls time and date settings for your VCR. 1. Press i. Press 1 or 2 to select TIME DATE. Press OK. To set the colour system 1. Press i. 2. The main 3. Press 1 or Press 3 or 4 4. menu will appear on the TV screen. 2 to select the SYSTEM and press OK. to select according to the COLOUR system used. HHMNDDMMYY :. - - -- -- -- --- . VCR REC TIME DATE Dr. E fOS ON OFF 2.
How to using This VCR the be easily displayed can menus The the main menus are Tuning menu programmed by using on screen. controlled from the Remote Control Handset. ing on your TV set and video recorder the POWER button. by press- Press i button. 2. The main on the TV problem please ING section 1. 2. will appear menu Automatically If the TV broadcast signal is weak your VCR may not detect the necessary information and will not be able to store them correctly.
in TV Stations Tuning In certain of the country broadcast areas 5. Manually Press 2 to select STATION your TV station. Press OK. The TV station signals may be too weak for your DVD/VCR Combi receiver's automatic tuning process to find or assign TV stations correctly. SEVEN PR C09 CH MFT C10 00 NINE TEN NBN GWN manually WIN PSET R Press i. The main Press 1 will appear on the TV 2 to select the PR SET. menu or list will appear.
the order of TV Stations Changing After TV stations into your DVD/VCR Combi change the order in tuning TV Stations Deleting After TV stations into your DVD/VCR Combi tuning receiver you may wish to receiver you may wish to delete a station. which The instructions they are stored without having to retune them against! The instructions given on this page will show you how you can simply move them into your desired order. 1. how 1. Press i. The main Press 1 Press i.
Before Operation-DVD part On-Screen You general playback status on the TV can be changed using the menu. on-screen display: display can the use the 1. Press DISPLAY 2. Press v / V to select Press b / B to an highlighted. change the inputting the title setting. You can appropriate (e.g. For number). press ENTER to execute the Selection Method 1/3 b / B, Numbers ENTER (or PBC mode) item. the number buttons if use Items Track Number during playback. The selected item is 3.
Initial LANGUAGE Settings LANGUAGE By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 22 to 25. To display the menu. SETUP will take you back to initial To go back to the on previous move alternate 22 menu appears. option the selected item, move as well as option then to the third level.
DISPLAY 5. Pressing scan DISPLAY TV 16 Aspect Display Mode Progressive Scan : ENTER will set this unit to Progressive mode. 9Wide Widescreen Caution: Off Once the setting for progressive scan output is entered, image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to an Move TV : Select Select when Press STOP and hold it for five seconds before releas- 2) DVD Aspect 4:3 On in error, you must reset the unit.
OTHERS DivX(R) The PBC, Auto Play and DivX(R) VOD settings can be changed. VOD DivX can display the DivX DRM (Digital Rights Management) Registration code for your unit only. You OTHERS PBC Auto On DivX(R) DivX(R) Off Play Your Select VOD Video On Demand registration To learn code is more : XXXXXXXX visit www.divx.com/vod Move PBC Set (Done) Select Registration code is used for VOD (Video-OnDemand) service agent.
LOCK Password (Parental Control) You LOCK Unlock Rating Password Country (Security Code) enter or New 2. Follow step "New" is Move Input Select Some movies contain that may not be suitable of these discs contain scenes Many parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer suitable more scenes as an If you or 4-digit code, verify. then press ENTER.
Operation You Tape Playing a You will be able to load and only eject video cassettes when your DVD/VCR Combi receiver is plugged into the mains. Your DVD/VCR Combi receiver may also playback recordings from NTSC tapes (on PAL TV). Getting a better picture When a cassette is inserted and playback started, the automatic tracking function works to get the best possible picture automatically.
Instant Timer 5. Recording (ITR) Play. SP will produce improved picture and quality, however LP will provide twice recording time as SP. Your DVD/VCR Combi receiver allows you to make recordings using a variety of simple methods: Instant Timer Recording (ITR) start recording a set period of time or until the for immediately video cassette runs 6. incorporates Long which enables you to record up to twice the amount of time on a video cassette.
G-CODE Programming PR G-CODE greatly simplifies entering the date, channel, start and end times of a Timer Recording by simply entering a G-CODE. GCODES are published in most TV guide magazines; they can vary one to nine numbers in length. 6. Press F or to revise. G-CODE is a registered trademark Development Corporation. of Gemstar Press D Make sure TIME 12 10 :: 111155 SP :: SP ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- or 2.
recording using On Screen Display Timer PR DATE TIME PR-01 You may set up to seven timer record events within one month of the current date. -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ SP -- SP -- SP -- SP -- SP -- SP -- SP SUMOTUWETHFRSA -- -- -- :: -- -~ -- Note Before the timer make sure that you have correctly and you know which stations you have tuned TV stations on your VCR.
If Timer record events Overlap... Change (Deleting) Do not overlap programmes, since overlapping porconflicting programmes will not be recorded. Earlier recording times have priority over later recording times as shown in the diagram. tions of the the Timer Programme If at a later date you wish to delete or change any of settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen.
Playing DVD a or General Features Video CD Note: Playback Setup Turn 1. on Unless stated otherwise, all the TV and select the video connected to the DVD Turn 2. the on input source player. the audio system (if applicable) and select source connected to the DVD player. input Press OPEN/CLOSE to open the disc tray and load your chosen disc in the tray, with the play- 3. back side down. Press OPEN/CLOSE to close the tray. Playback automatically. If playback does not start, 4.
Still Picture and Frame-by-Frame Playback Repeat You 1. 2. Press PAUSE/STEP the remote control during playback. Advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly. on ? Slow Motion The DVD ? player now ? go into PAUSE mode. ? ? 2. Press . The during pause. will enter SLOW mode. player Use the . 3. > or or > to select the t 1/16, t 1/8, t 1/4 or t 1/2 T 1/16, T 1/8, T 1/4 or T 1/2 required speed: (backward), or (forward).
Zoom Use to zoom the video enlarge Press ZOOM 1. image. during playback or still playback to activate the Zoom function. The square frame appears briefly in the right bottom of the picture. → 1600% size → screen fit mode → You can when the contents of DVD discs: Menus DVDs may offer menus that allow you to access special features. To use the disc menu, press DISC Input image appears on you're playing a DVD movie.
Playing Audio CD an or MP3/WMA MP3 / WMA disc limited Disc ? The DVD player play recordings on CD-ROM, CD-R, or ? CD-RW discs. player is Sampling frequency: within 8 48 kHz (MP3), 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32 192kbps (WMA) The player cannot read an MP3/WMA file that has a file extension other than ".mp3" / ".wma". CD-R physical format should be ISO 9660 If you record MP3 / WMA files using software that cannot create a file system (eg.
Audio CD and MP3 / WMA Disc Random Features 1. Pause screen. Press PAUSE/STEP 1. To return to 2. Press RANDOM during playback or when playback is stopped. Random Playback begins immediately and RANDOM appears on the menu 2. during playback. playback, press PLAY, again. ENTER repeatedly or playback, press RANDOM disappears from the To return to normal until RANDOM menu screen.
Repeat Programmed Programmed Playback 1. program 1. Insert a Press REPEAT when 2. contain 30 tracks. Press REPEAT to select ? disc. ? ? Audio CD MUSIC or menu Erasing Press PROGRAM again, then the Program the mark will E MUSIC 1/12 List E Program Track5 Track2 Track7 1-Music1 4-Music4 Track3 Track4 2-Music2 6-Music6 Track4 Track1 3-Music3 1-Music1 2. Press B to List Program Press PROGRAM in the stop mode to enter Program Edit mode. : move to the "Program" list.
Viewing JPEG Disc a Moving Using this DVD Player you can view Kodak PICTURE CDs and discs with JPEG files. 1. Insert a appears disc and close the tray. The PHOTO on the TV screen. menu PHOTO List JPEG to another File Press . or > during viewing a picture to the previous file. once advance to the next file to or JPEG Zoom Use zoom (see 33 the to enlarge page) photo image.
5.1 Speaker Setup This to chapter includes important reference information help you set your DVD/VCR Combi receiver. If you connected following settings for the built-in 5.1 channel how far the sound has to travel to reach your set lisThis allows the sound from each speaker tening point. Press b / B to 1. Press SETUP. The setup 2. Use v / V to select the AUDIO 3. move menu speaker. [0.3(1)m(ft) appears. option Use v / V to select the move Speaker Setup option to the third level.
DVD VR format Disc Playing a This unit will play DVD-R/RW discs recorded Maintenance and Service using using the DVD-Video format that have been finalized a ? This unit will play DVD-RW discs recorded using Recording (VR) format. disc and close the tray. The TITLE LIST on the TV screen. Insert a menu appears DVD-VR When shipping Please ? save ? Press v / V to select a track then press PLAY ENTER and playback starts. Press TITLE to move or to the list menu.
Playing a DivX Movie Disc DivX disc Using this DVD Player you can play with this player is limited DivX disc. ? disc and close the tray. The MOVIE appears on the TV screen. Insert 1. compatibility follows: as a menu Available resolution size of the DivX file is under 720x576 ? MOVIE The file (W x name H) pixel. of the DivX subtitle is available by 56 characters.
Additional Features-VCR part On Screen You may Video Doctor Display easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your DVD/VCR Combi receiver will appear on the TV screen. If a recording is taking place these On Screen onto the Displays This feature informs you that there is a problem with your DVD/VCR Combi receiver. These error messages will appear on the TV screen. 1.
Hi-Fi Stereo Sound System Your DVD/VCR Combi receiver will record and back Hi-Fi stereo sound. In addition it has NICAM digital to record and a play- stereo stereo sound decoder. This allows you the sound in several different playback ways. Video cassettes recorded on your DVD/VCR Combi receiver will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks.
Additional Features Last Scene Memory This player memorizes last if you even off the remove from the last disc scene If you load scene is player. scene remains in memory the disc from the player or switch that is viewed. The last memorized, the a disc that has the automatically scene recalled. Note: This player does not memorize the scene of a disc if you player before commencing to play the disc.
Copying from DVD To VCR This unit allows you to copy the contents of a DVD to a VHS tape with a press of the REC/ITR button. Notes: Be sure setup to set to "Off" on the menu. If the DVD you protected, 1. "Progressive Scan" to copy is copy you may not be able to copy the disc. are attempting 3. Insert VHS With this video recorder you can make recordings from an external source, such as copying from another blank VHS a Copy the DVD to VHS videotape Tape or a camcorder.
Presetting You make that you have turned down the sure (see "Presetting radio stations" on the left). Press FM/AM the remote control on front on Preset radio stations in the DVD/VCR Combi receiver memory first volume. 1. to the Radio Listening preset 50 stations for FM and AM. Before can tuning, the Radio Stations panel until the frequency the display and TV screen. or on the 1.
into Tuning a Press FM/AM 1. Station on Manually the remote control front panel until the frequency the display and TV screen. on Press FM/AM 2. front panel Press 3. 1 + and on the the remote control or on the to select the desired band. PRESET 2 or on band appears on on the front panel or press the remote control to tune in the - desired station.
Reference Language Codes Use this list to input your desired language for the Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Check the following guide for the possible cause of a problem before service. contacting Cause Symptom Correction No power. The power cord is disconnected. Plug securely. The power is on, but the DVD/VCR Combi receiver does not work. No disc is inserted. No tape is inserted. Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) No The TV is not set to receive DVD/VCR Combi receiver signal output. picture.
Symptom Cause This remote control uses the same buttons for VCR and DVD functions The remote control is not pointed at the remote sensor of the DVD/VCR Combi receiver. sensor The remote control is too far from the DVD/VCR Combi receiver. Operate (7 m). There is an obstacle in the path of the remote control and the DVD/VCR Combi receiver. Remove the obstacle. The batteries in the remote control exhausted. Replace (ex. PLAY).
Specification General Power requirements consumption Dimensions (approx.) Mass (approx.) Operating temperature Power Refer to main label Refer to main label 430X81X360mm(wxhxd) 5.8 kg (17.
Speaker Section Satellite (LHS-CX247T) Type Impedance Frequency Response 1 Way 1 Speaker 6Ω 130 20,000 Hz - Sound Pressure Level 85 dB/W Rated 25W Input Power Max Input Power Net Dimensions (W Net Weight 50W x H x 90x138.5x100mm D) 0.
P/N: 3834RH0064B
