Owner's Manual

31
Playing
a
DVD
or Video CD
Playback Setup
1.
Turn on the
TV
and select the video
input
source
connected to the
DVD
player.
2.
Turn on the audio
system (if applicable)
and select
the
input
source connected to the
DVD
player.
3. Press OPEN/CLOSE to
open
the disc
tray
and
load
your
chosen disc
in
the
tray,
with
the
play-
back side down.
4.
Press OPEN/CLOSE to close the
tray. Playback
starts
automatically.
If
playback
does not
start,
press
PLAY.
In
some
cases,
the disc menu
might appear
instead:
Use the
b
B v
V
buttons to select the
title/chapter
you
want to
view,
then
press
ENTER
to start.
Press
TITLE
or DISC MENU to return to the menu
screen.
Use the
1 2
3
4
buttons to select an
option you
want,
then
press
ENTER
to view the
option.
Use the number buttons to select the track
you
want to view and
press
RETURN to return to the
menu screen. Menu
settings
and
operating proce-
dures
may
differ. Follow the instructions on the
each menu screen. You also
may
set PBC to Off
(See
"PBC" on
page 25).
Notes:
?
If
parental
control is set and the disc is not
within
the
rating settings you
must
input
the
password.
(See
"Lock Menu" on
page 26.)
?
DVDs
may
have a
region
code. Your
player
does
not
play
discs that have a
region
code different from
your player.
The
region
code for this
player
is
5
(five).
?
To watch a
DVD
during
timer
recording standby
mode,
press
POWER and
DVD
to switch to
DVD
mode.
General Features
Note:
Unless stated
otherwise,
all
operations
described use
the remote control. Some features
may
also be avail-
able on the
Setup
menu.
Moving
to another TITLE
When a disc has more than one
title,
you
can move to
another title. Press DISPLAY while
playback
is
stopped
then the
appropriate
number
(0-9)
or use
b
/ B
to move to another title.
You can
play any
title
by inputting
its number while
playback
is
stopped.
Moving
to another CHAPTER/TRACK
When a title on a disc has more than one
chapter
or a
disc has more than one
track,
you
can move to anoth-
er
chapter/track
as follows:
?
Press
.
or
>
briefly during playback
to select
the next
chapter/track
or to return to the
beginning
of the current
chapter/track.
?
Press
.
twice
briefly
to
step
back to the
previous chapter/track.
?
To
go directly
to
any chapter during
DVD
playback,
press
DISPLAY and
press
v /
V
to select the
chapter/track
icon.
Then,
input
the
chapter/track
numberoruseb/B.
Search
1.
Press and hold
.
or
>
for about two seconds
during playback.
The
player
will
now
go
into SEARCH mode.
.
2.
Press and hold
.
or
>
repeatedly
to select
the
required speed:
mX2, mX4, mX16,
mX100
(backward)
or
MX2, MX4, MX16,
MX100
(forward).
With
a Video
CD,
the Search
speed changes:
mX2, mX4,
mX8
(backward)
or
MX2,
MX4,
MX8
(forward).
3. To exit SEARCH
mode,
press
PLAY.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback
to hear a
different audio channel
(Stereo,
Left,
or
Right).