Owner's Manual

Operation
39
This
chapter
includes
important
reference information
to
help you
set
your
DVD/VCR Combi receiver.
Speaker Setup
Make the
following settings
for the built-in 5.1 channel
surround decoder.
1.
Press SETUP. The
setup
menu
appears.
2.
Use
v /
V
to select the AUDIO
option
then
press
B
to move to the second level.
3. Use
v /
V
to select the
Speaker Setup option
then
press
B
to move to the third level. "Select" is
high-
lighted.
4.
Press
ENTER
and 5.1
Speaker Setup
menu
appears.
5. Use
b
/ B
to select the desired
speaker.
6.
Adjust options using
v /
V
/
b
/ B
buttons.
7.
Press RETURN to return to the menu screen.
Speaker
selection
Select a
speaker
that
you
want to
adjust. (Front
speakers (Left),
Center
Speaker,
Front
speakers
(Right),
Rear
speakers (Right),
Rear
speakers (Left),
or
SubWoofer)
Note:
Certain
speaker settings
are
prohibited by
the
Dolby
Digital licensing agreement.
Size
Since the
speaker settings
are
fixed,
you
cannot
change
the
settings.
Volume
Press
b
/ B
to
adjust
the
output
level of the selected
speaker. (-6dB
~
6dB)
Distance
If
you
connected
speakers
to
your
DVD/VCR Combi
receiver,
setting
the Distance lets the
speakers
know
how far the sound has to travel to reach
your
set lis-
tening point.
This allows the sound from each
speaker
to reach the listener at the same time.
Press
b
/ B
to
adjust
the Distance of the selected
speaker.
[0.3(1)m(ft)
-
6.0(20)m(ft)]
Test
Press
b
/ B
to test the
signals
of each
speaker. Adjust
the volume to match the volume of test
signals
memo-
rized
in
the
system.
Front Left
(L)
→
Center
→
Front
Right (R)
→
Rear Left
(R)
→
Rear
Right (L)
→
SubWoofer
AUDIO
Speaker
Volume
Distance
Test
Move Return Select
Size
Front L
Small
0
dB
m(ft)
0.6(2)
Off
Enter
5.1
Speaker Setup