LH-D6240X JA3RMLS_ENGLISH DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-D6240 (Main Unit: LH-D6240X, Speakers: LHS-D6240T, LHS-D6240W) CD-R/RW Before connecting up, operating please read this instruction The working life of date of purchase. this repairing booklet carefully or product this and product, completely.
Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute risk of electric a shock to persons.
Table of Contents Audio CD and MP3/WMA Disc Introduction SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 Operation PlayingAudioCDsorMP3/WMADiscs NotesonMP3/WMARecordings. . . . . . . . 22-23 . . . . . . . . . . . . . .22 .22 Pause.............................23 Precautions.............................5 SelectingTracks.....................23 RepeatTrack/All/Off...................23 NotesonDiscs.......
Before Use Disc-related terms Discs Playable Title DVD The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) you to locate it Audio CD (8cm/12cmdisc) addition, this unit can play a DVD±R, DVD±RW, Kodak PICTURE CD and CD-R audio titles, MP3, WMA or or CD-RW that contains JPEG files.
Before Use (Continued) After the unit Handling When shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position the unit away from the TV, VCR, unit after removing the disc.
Front Panel Control and Window Indicators Display STANDBY/ON OPEN/CLOSE VOLUME controller STANDBY indicator FUNCTION/ Lights red when the receiver is in Standby mode (off).
Remote Control Overview POWER OPEN/CLOSE (p. 19) FUNCTION SELECTOR You also select the desired can function with the FUNC./PLAY the front on panel. Press and hold down this button about 3 seconds, then press repeatedly NUMBER SLEEP to select other function. (p. 28) SUBTITLE PRO LOGIC II (p. 14) AUDIO (p. 14) (p. 14) (p. 16) SOUND SETUP (p. 21) RETURN (p. 19) DISPLAY (p.
Rear Panel Connections SPEAKER Connectors FM 75Ω Antenna Connector AUXILIARY INPUT Connectors S-VIDEO OUT Connector S/VIDEO OUT MONITOR OUT MONITOR OUT Connector AM Antenna Connectors POWER CORD Do not touch the inner panel. Electrostatic damage to the unit.
Connections AM-FM Aerial Connections Connect the Connect supplied FM/AM aerial for listening to the radio. the AM loop aerial to the AM aerial connector. Connect he FM wire aerial to the FM aerial connector. FM Wire aerial AM Loop aerial PREATION (supplied) (supplied) S/VIDEO OUT MONITOR OUT otes To prevent noise pickup, keep the AM loop aerial away from the DVD/CD receiver and other components. Be sure After fully extend the FM wire aerial.
Connections (Continued) TV Connections Rear of TV S-VIDEO SCART INPUT VIDEO INPUT AUDIO INPUT INPUT L R L VIDEO Cable V S T Back of the DVD/CD receiver SCART-RCA Adaptor TV/MONITOR (SCART type) S/ Make the of the following connections, depending capabilities of your existing equipment. one on MON ROUT Video connection Connect the MONITOR OUT receiver to the VIDEO IN ips Depending OUT cable jack jack on the DVD/CD on the TV using the video (V).
Connections External (Continued) Equipment Connections Rear of VCR (or LD AUDIO OUTPUT L player, etc) PREATION VIDEO OUTPUT R S/VIDEO OUT MONITOR OUT Connection Connect the AUX IN (L/R) jacks on the DVD/CD receiver to the AUDIO OUT (L/R) jacks on the VCR, LD player, etc using the audio cables. ip Press AUX on the remote control to select input to these jacks. AUX appears on the Display Window.
Connections (Continued) Speaker System Connections Connect the speakers using To obtain the best possible Front speaker (Right) the supplied speaker surround Center cords. sound, adjust the speaker parameters (volume, distance, etc.). Front speaker (Left) speaker S/VIDEO OUT MONITOR OUT Rear speaker (Right surround) Rear speaker (Left surround) Subwoofer otes Be sure to match the speaker cable to the appropriate terminal on the components: + to + and -- to --.
Connections Speaker In the Placement of normal case (Continued) position the 6 use speakers (2 front centre speakers, speaker, 2 rear speakers and sub- woofer). If you want to subwoofer. ? ? the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a Front speakers According to your listening position speakers to 45 degree. set up the for speakers equal distance.
Before Mini Operation Glossary for Audio Stream & right speakers and subwoofer. Standard two channel (stereo) sources completely bypass the sound field processing. This allows you to play any source using only the front left and right speakers and subwoofer. Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark.
Before General This manual Operation (Continued) Explanation 3 operating the DVD/CD receiver. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by gives General screen. playback 1 2 is not available on status can be be on the TV menu. an The selected item will be an item. be also be used for number). For some setting functions, setting.
Before Initial You can Operation (Continued) Language Setup set your Personal Preferences own on the DVD/CD receiver. Disc Language Select DVD for the disc's language a Menu, Audio, and Subtitle. Initial Settings General Operation 1 Press SETUP. The setup menu appears. original language set for the disc is selected. Other : To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 29.
Before Operation (Continued) Speaker setup 5.1 Auto Speaker settings You Play DVD set up the DVD/CD receiver so a DVD disc automatically starts playing whenever the DVD is insert- DVD Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 26.) can ed.
Before Operation (Continued) Parental Control Country Rating Enter the code of Movies DVD DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control on information that certain applies to the the disc.
DVD and Video CD DVD and Video CD Playback Setup Turn on Operation General Features Playback DVD VCD2.0 the TV and select the video VCD1.1 input ote source con- the 1 2 3 system: Turn input source on the audio system and select TITLE Selection Press OPEN/CLOSE to close the tray. READING appears on the TV screen, and automatically. If playback press PLAY.
DVD and Video CD General Features Still Picture and VCD2.0 DVD (continued) A* VCD1.1 To during playback. The DVD/CD receiver will now go into PAUSE mode. advance the repeat play, 1 Press SLOW SCAN - VCD2.0 m or + " * A " briefly appears on briefly begins (" Time Search the TV starting point. screen. at your chosen end point. the TV screen, and the repeat again on " appears the display window).
DVD and Video CD General Features Zoom VCD2.0 DVD Operation during playback or still the repeatedly, discs: Menus to DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, level press the appropriate number button to select an option. Or, use the 1 234 buttons to highlight your selection, then press ENTER. playback magnification steps. 2 Use the 1 234 buttons to move the zoomed through picture.
Audio and MP3/WMA Disc Operation Notes Playing Audio CD and MP3/WMA Disc MP3 CD MP3/WMA play can An MP3 file is audio data MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes MP3/WMA Recordings on right. Insert a disc and close the tray. Audio CD; Audio CD menu appears on MPEG1 audio files that have on The player About the TV compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files".
Audio and MP3/WMA Disc Pause MP3 CD 1 Press PAUSE/STEP Operation (Continued) WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To 1 press repeat Selecting MP3 CD or > playback to go to the next track beginning of the current track. Press SKIP/SCAN .
JPEG File Viewing Operation JPEG Files Press SKIP/SCAN . This DVD/CD receiver play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert can disc and close the tray. The MP3/WMA-JPEG choice menu appears TV screen. 1 another File Selecting JPEG on the > once to advance to the next file picture or during viewing a to the previous file.
Programmed Playback CD VCD2.0 Audio CD and MP3/WMA Disc function enables you to store your favorite tracks from any disc in the player memory. during playback or in the Program Edit mode. Press PROGRAM 1 mode to enter The the stop E mark will appear to the right of the word the right side of the menu screen. on On a setup Video CD with menu Program contain 30 tracks. can Programmed Playback ote Program Program WMA Video CD Programmed Playback The MP3 VCD1.
Additional Information Speaker Setup Adjust the following settings for the built-in 5.1 channel Last Condition surround decoder. DVD CD Memory VCD1.1 Disc Audio This DVD/CD receiver memorizes the Disc Subtitle R Disc Menu Country Code Volume Aspect Menu Language 0dB Size Small Distance 0.3 settings for the last disc that you have viewed.
Radio Operation Radio stations Presetting You can ing, make 50 stations for FM and AM. Before tun- preset sure that you have turned down the volume. Press BAND 1 on the remote control until FM AM appears in the 2 3 display or window. or panel for about two seconds frequency indication starts to change, then when the DVD/CD Receiver tunes in station. "TUNED" and "STEREO" appear in the stereo (for 3 a program) window.
Radio Operation (Continued) Sleep Timer You set the DVD/CD receiver to turn off automati- can cally 1 at a specified time. Press SLEEP to set the desired The SLEEP indicator and play 2 Dimmer Setting sleep sleep time. time appears in the dis- window. Each time you press SLEEP the in the following order. setting changes SLEEP 90→80→70→60→50→40→30→20→10→ OFF can check the time remaining before the DVD/CD receiver turns off. Press SLEEP.
Language Code Enter the appropriate (See page 16).
Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 18).
Troubleshooting Check the following guide for the possible of cause a before problem contacting service. Cause Symptom Correction No power. ? The power cord is disconnected. ? the power cord wall outlet. The power is on, but the DVD/CD receiver ? No disc is inserted. ? Insert does not work. No Plug (Check lit.) picture. ? The TV is not set to receive DVD signal ? output.
Troubleshooting (Cont'd) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The signal strength weak (when tuning tuning). of the stations is too ? Tune in the station manually. ? Preset the stations (page 27).
Specification Power Power [Genral] Refer to main label Mass External dimensions [CD/VD] [Video] AM [MW] x H x D) 360 x 75 x Laser Semiconductor Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) PAL Designs 5°C to 35°C, Operation status: Horizontal laser, wavelength 650 REF NC nm 200 Hz to 18 kHz More than 70 dB (1 kHz, NOP, 20 kHz LPF/A-Filter) More than 65 dB (1 kHz, at 12W position) (20 kHz LPF/A-Filter)
P/N: 3834RH0034B