LH-D6242D_JA5ILLS_ENG DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-D6242 (Main Unit: LH-D6242D, Speakers: LHS-D6242T, LHS-D6242W) CD-R/RW Before please up, operating or repairing this read this instruction booklet carefully and connecting product, completely.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Ta ble of Contents Audio CD and MP3/WMA Disc Introduction SafetyPrecautions.........................2 TableofContents..........................3 Operation PlayingAudioCDsorMP3/WMADiscs NotesonMP3/WMARecordings. . . . . . . . 22-23 . . . . . . . . . . . . . .22 .22 Pause.............................23 BeforeUse..............................4-5 Precautions.............................5 SelectingTracks......................23 RepeatTrack/All/Off...................23 NotesonDiscs.....
Before Use Disc-related terms Discs Playable Title The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) you to locate it Audio CD (8cm/12cmdisc) addition, this unit can play a DVD±R, DVD±RW, Kodak PICTURE CD and CD-R audio titles, MP3, WMA or or CD-RW that contains JPEG files.
Before Use (Continued) Precautions Storing After the unit Handling discs playing, store the disc in its case. When Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- The light, shipping the unit original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory.
Front Panel Control and Display Window STANDBY/ON Indicators OPEN/CLOSE VOLUME controller STANDBY indicator FUNCTION/ Lights red when the receiver is in Standby mode (off).
Remote Control Overview POWER OPEN/CLOSE (p. 19) FUNCTION SELECTOR You also select the desired can function with the FUNC./PLAY the front on panel. Press and hold down this button about 3 seconds, then press repeatedly NUMBER SLEEP to select other function. (p. 28) SUBTITLE PRO LOGIC II (p. 14) AUDIO (p. 14) (p. 14) (p. 16) SOUND SETUP (p. 21) RETURN (p. 19) DISPLAY (p.
Rear Panel Connections SPEAKER Connectors FM 75Ω Antenna Connector AUXILIARY INPUT Connectors S-VIDEO OUT Connector S/VIDEO OUT MONITOR OUT MONITOR OUT Connector AM Antenna Connectors POWER CORD Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
Connections AM-FM Aerial Connections Connect the supplied FM/AM aerial for listening to the radio. loop aerial to the AM aerial connector. Connect the AM Connect he FM wire aerial to the FM aerial connector. FM Wire aerial AM Loop aerial PREATION (supplied) (supplied) S/VIDEO OUT MONITOR OUT otes To prevent noise pickup, keep the AM loop aerial away from the DVD/CD receiver and other components. Be sure After to fully extend the FM wire aerial.
Connections (Continued) TV Connections Rear of TV S-VIDEO SCART INPUT VIDEO INPUT AUDIO INPUT INPUT L R L VIDEO Cable V S T Back of the DVD/CD receiver SCART-RCA Adaptor TV/MONITOR (SCART type) S/ Make the one of the capabilities following connections, depending existing equipment. on of your to Connect the MONITOR OUT cable on your TV and other equipment you wish are various ways you could connect connect, there the DVD/CD receiver.
Connections External (Continued) Equipment Connections Rear of VCR (or LD AUDIO OUTPUT L player, etc) PREATION VIDEO OUTPUT R S/VIDEO OUT MONITOR OUT Connection Connect the AUX IN (L/R) jacks on the DVD/CD receiver to the AUDIO OUT (L/R) jacks on the VCR, LD player, etc using the audio cables. ip Press AUX on the remote control to select input to these jacks. AUX appears on the Display Window.
Connections (Continued) Speaker System Connections Connect the speakers using To obtain the best possible Front speaker (Right) the supplied speaker surround Center cords. sound, adjust the speaker parameters (volume, distance, etc.). Front speaker (Left) speaker S/VIDEO OUT Rear speaker (Right surround) MONITOR OUT Rear speaker (Left surround) Subwoofer otes Be sure to match the speaker cable to the appropriate terminal on the components: + to + and -- to --.
Connections Speaker In the Placement of normal case (Continued) position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and sub- woofer). If you want to subwoofer. play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a ?F r ont speakers According to your listening position speakers to 45 degree.
Before Operation Glossary for Mini Audio Stream & right speakers and subcompletely bypass the sound field processing. This allows you to play any source using only the front left and right speakers and subwoofer. woofer. Standard two channel Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark.
Before General This manual Operation (Continued) Explanation operating the DVD/CD receiver. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, that the indicating operation is not permitted by the gives DVD/CD receiver Press 1/2 to 3 basic instructions for or is not available on numbers General screen. Playback playback status On-screen be displayed on the TV changed on the menu.
Before Initial Operation (Continued) Language Setup You can set your own Personal Preferences DVD/CD receiver. on the Disc Language Select DVD language a for the disc's Menu, Audio, and Subtitle. Initial 1 General Settings Operation setup menu : The Other :To select another Press SETUP. The original language set for the disc is selected. language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 30.
Before Operation (Continued) Speaker setup 5.1 Auto Speaker settings You DVD Play can DVD set up the DVD/CD receiver so a DVD disc starts playing whenever the DVD is insert- automatically Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 26.) ed.
Before Operation (Continued) Parental Control Rating Movies DVDs may contain on applies able for selection to the more on some disc complete the disc. These scenes on 8, and alternatively, 1 to not suitable for scenes Therefore, discs may contain Parental Control information that certain suitable discs.
DVD and Video CD DVD and Video CD Playback Setup Tu rn on Operation General Features Playback VCD2.0 DVD the TV and select the video VCD1.1 input ote source con- the 1 system: Turn input source the audio on system and select TITLE Selection Press OPEN/CLOSE to open the disc Load your chosen disc in the side facing down. READING appears automatically. tray. When tray.
DVD and Video CD General Features Still Picture and VCD2.0 DVD can A* To during playback. advance the picture frame-by-frame by repeatedly on the remote PAUSE/STEP press- a " * A Slow Motion press PLAY. DVD 1 Press SLOW SCAN - VCD2.0 m or M appears briefly briefly begins (" the TV on 2 Press REPEAT A-B Time Search at your chosen end again on starting point. screen. point. the TV screen, and the repeat appears the display window).
DVD and Video CD General Features Zoom VCD2.0 DVD Operation (continued) during playback or still playback the repeatedly, discs: Menus to DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, press the appropriate number button to select an option. level magnification Or, steps. 2 Use the 1 234 buttons to move the zoomed through picture.
Audio and MP3/WMA Disc Operation Notes Playing Audio CD and MP3/WMA Disc CD MP3 can play compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". MPEG1 audio files that have on disc and close the tray. CD; Audio CD menu appears on the TV screen go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 The player can not read extension other than About technology.
Audio and MP3/WMA Disc CD Pause MP3 1 Press PAUSE/STEP Operation (Continued) WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To 1 press repeat CD MP3 Press SKIP/SCAN . or > Press SKIP/SCAN . twice the In previous step back to briefly CD, the track number 3 To to directly to any track, enter the numbered buttons (0-9) to go using Repeat icon and "A Repeat during playback.
JPEG File Operation Viewing JPEG This DVD/CD receiver and Kodak picture read the notes Insert 1 a on Files JPEG play discs with JPEG files playing JPEG recordings, Recordings on right. can CD. Before JPEG disc and close the tray. The MP3/WMA-JPEG choice TV 5 menu appears on the screen. To at any other stop viewing The JPEG menu another File Selecting Press SKIP/SCAN . JPEG PAUSE/STEP Press 3/4 to select the JPEG then press ENTER.
Programmed Playback CD VCD2.0 Audio CD and MP3/WMA Disc VCD1.1 MP3 Video CD Programmed Playback The function enables you to store your favorite tracks from any disc in the player memory. Press PROGRAM 1 mode to enter during playback or in the Program Edit mode. the E The mark will appear to the right of the word the right side of the menu screen. on On a Video CD with setup menu Program contain 30 tracks.
Additional Information Speaker Setup Adjust the following settings for the built-in 5.1 channel Last Condition surround decoder. DVD CD Memory VCD1.1 Disc Audio This DVD/CD receiver memorizes the Disc Subtitle R Disc Menu Code Volume Aspect Menu Language 0 dB Size Small Distance 0.3 user for settings the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or Front L Rating Country TV R switch off the player.
Radio Operation Radio stations Presetting You can ing, make 50 stations for FM and AM. Before tun- preset that you have turned down the volume. sure Press BAND 1 on the remote control until FM AM appears in the 2 3 display or window. And then every time you press AM changes alternately. or panel for about two seconds frequency indication starts to change, 2 until the appear in the (for stereo or FM appears in the dis- window.
Radio Operation (Continued) Sleep Timer Setting RDS You This unit is 1 set the DVD/CD receiver to turn off automati- can cally at a time. which Press SLEEP to set the desired The SLEEP indicator and sleep sleep time. time appears in the dis- window. play 2 specified Each time you press SLEEP the in the following order.
Radio Operation (Continued) Programme Search (PTY) A ability to encode broadProgramme Type (PTY) codes that indicate type of material being broadcast. The following list major benefit of RDS is its casts with the shows the abbreviations used to indicate each PTY along with an explanation of the PTY.
Language Code Enter the (See appropriate 16).
Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 18).
Tr oubleshooting Check the following guide for the possible cause of a before problem Cause Symptom Correction No power. ? The power cord is disconnected. ? The power is on, but the DVD/CD receiver ? No disc is inserted. ? Plug the power cord wall outlet. securely Insert that the DVD or, disc. a (Check ? The TV is not set to receive DVD signal ? output. Select the on the TV The video cable is not connected ? securely.
Troubleshooting (Cont'd) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The of the stations is too weak in with automatic signal strength (when tuning tuning). No stations have been preset or preset ?Tune in the station ? Preset the stations REF NC manually. (page 27).
Specification Power Power [Genral] Refer to main label Mass External dimensions [CD/VD] [Video] AM [MW] x H x D) x 75 Laser Semiconductor Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) PAL Designs 35°C, Operation status: Horizontal 650 nm 200 Hz to 18 kHz More than 70 dB (1 kHz, NOP, 20 kHz LPF/A-Filter) More than 65 dB (1 kHz, at 12W position) (20 kHz LPF/A-Filter) (p-p), 75 Ω, negative sync.
