LH-D6430A NA4MSLS DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-D6430 (Main Unit: LH-D6430A, Speakers: LHS-D6430T, LHS-D6430W) CD-R/RW Before up, operating or repairing this read this instruction booklet carefully and connecting please completely.
Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute risk of electric a shock to persons.
Table of Contents Audio CD and MP3/WMA Disc Introduction SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 Operation Playing an Audio CD and MP3/WMA NotesonMP3/WMARecordings. . . . . Disc . . . . . 22-23 . . . . . . . . . . 22 .22 Pause.............................23 Precautions.............................5 MovingtoanotherTrack...............23 RepeatTrack/All/Off...................23 NotesonDiscs...
Before Use Playable Disc-related terms Discs Title DVD The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) you to locate it Audio CD (8cm/12cmdisc) In addition, this unit can play a SVCD, DVD-RW, DVD+RW, Kodak PICTURE CD, CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files.
Before Use (Continued) Precautions Storing After the unit Handling When shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position the unit away from the TV, VCR, unit after removing the disc. To use volatile such liquids, as the unit.
Front Panel and Display Window STANDBY/ON PHONES connector STANDBY indicator Lights red when the receiver is in Standby mode (off). VOLUME controller PLAY/FUNCTION button DISPLAY Window DISC Tray TUNING (-/+)/SKIP/SCAN buttons VOLUME PLAY( ) STANDBY/ON FUNC.( STOP PAUSE ) MONO/ST.
Remote Control OPEN/CLOSE button POWER button AUX button BAND button CD/DVD button MUTE button DIMMER button SLEEP button INTRODUC NUMBER buttons REPEAT A-B button REPEAT button SOUND MODE button PL II PROGRAM button PRO LOGIC II button CLEAR button PRESET(+/-) AUDIO button buttons VOLUME (+/-) buttons SUBTITLE button ZOOM button RETURN button ENTER button ARROW buttons For use in on a GUI menu highlighting selection a DISPLAY button screen, TITLE and MENU screen.
Rear Panel POWER CORD SUBWOOFER LINE OUT Connector VIDEO 2 SPEAKER Connectors (Input) VIDEO 1 Connectors (Input/Output) Connectors OPTICAL IN Connector MONITOR OUT Connector S-VIDEO OUT Connector COMPONENT VIDEO OUT Connect to Do not touch the inner panel. Electrostatic damage to the unit. 8 a TV with Y Pb (Y Pb Pr) Pr inputs.
Connections to a TV Connecting Make the of the following connections, depending capabilities of your existing equipment. one ips Depending on Progressive described below. Caution -- Make sure the DVD/CD receiver is connected to the TV. Select the correct AV -- directly your TV. Do not connect your DVD/CD receiver to TV via your VCR.
Connections Connecting 1 2 3 (Continued) to Optional Equipment Connect a VCR to the VIDEO 1 connectors. Connect a additional VCR to the VIDEO 2 connectors. Connect an optical output of DVD Player (or Digital Device etc) to the OPTICAL IN connector.
Connections Aerial Connections Connect the Connect supplied FM/AM aerial for listening to the radio. the AM loop aerial to the AM aerial connector. Connect he FM wire aerial to the FM aerial connector. AM FM Wire aerial Loop aerial PREATION (supplied) (supplied) otes To prevent noise pickup, keep the AM loop aerial away from the DVD/CD receiver and other components. Be sure After fully extend the FM wire aerial. connecting the FM wire aerial, keep it to as horizontal as possible.
Connections (Continued) Speaker System Connection Connect the the speakers using To obtain the best possible supplied speaker surround Front speaker (Right) cords. sound, adjust the speaker parameters (volume, distance, etc.).
Connections (Continued) Speaker Positioning In the of normal case position the 6 use speakers (2 front centre speakers, speaker, 2 rear speakers and sub- woofer). If you want to subwoofer. ? ? the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a Front speakers According to your listening position speakers to 45 degree. set up the for speakers equal distance.
Before Mini Operation Glossary for Audio Stream & Surround mode Sound Mode You enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD compact discs, etc.bearing the trademark.
Before General This manual Operation Explanation 3 operating the DVD/CD receiver. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by gives General screen. playback 1 2 is not available on status Temporary can be be TRACK Repeat Track ALL Repeat All Tracks Repeat A-B Repeat Off AB OFF display operation Press DISPLAY Resume during playback.
Before Initial You Operation (Continued) Settings set your can Picture Personal Preferences own on the player. TV Aspect 4:3 Letterbox: Select when nected. Initial General Settings Operation The setup Displays appears.
Before Operation (Continued) Speaker setup 5.1 Auto Speaker settings You Play DVD set up the DVD/CD receiver so a DVD disc automatically starts playing whenever the DVD is insert- DVD Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 26.) can ed.
Before Operation (Continued) Parental Control Country Rating Enter the code of Movies DVD DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control on information that certain to the applies complete the disc.
DVD and Video CD Playing a DVD and Video CD Playback Setup Turn on Operation DVD VCD2.0 the TV and select the video General Features VCD1.1 input ote source con- the 1 2 3 system: Turn input source on the audio system and select Moving Load your chosen disc in the playback side facing down. READING appears tray. When tray. might menu The appear or select When displayed may be displayed first after Video CD which offers a menu.
DVD and Video CD General Features Still Picture and VCD2.0 DVD (continued) To during playback. now go into PAUSE mode. advance the repeat play, con- press PLAY. DVD VCD2.0 1 Press SLOW SCAN m title: a " A* " briefly appears on "AB" appears briefly begins (" the TV starting point. screen. at your chosen end point. the TV screen, and the repeat again on " appears the display window).
DVD and Video CD General Features Zoom VCD2.0 DVD Operation (continued) during playback or still the repeatedly, discs: Menus to DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, level press the appropriate number button to select an option. Or, use the 1 234 buttons to highlight your selection, then press ENTER. playback magnification steps. 2 Use the 1 234 buttons to move the zoomed through picture.
Audio and MP3/WMA Disc Playing CD an Operation Audio CD and MP3/WMA Disc MP3 play can 1 MP3/WMA disc and close the MPEG1 audio files that have on tray. CD; Audio CD menu appears on the TV screen go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". The DVD/CD receiver has a About Audio a MP3/WMA Disc The MP3/WMA appears on the TV screen.
Audio and MP3/WMA Disc CD Pause MP3 1 Press PAUSE/STEP Operation (Continued) WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To 1 press repeat Moving or > playback to go to the next track beginning of the current track. Press SKIP/SCAN . twice In previous case MP3 WMA briefly during or step back to CD, the track number to go using directly to any track, the numbered buttons Repeat icon and "A Repeat to enter (0-9) during playback.
JPEG Disc Viewing a Operation JPEG disc Press SKIP/SCAN . This DVD/CD receiver play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert 1 a can disc and close the menu appears on the screen. or > once to advance to the next file picture or during viewing a to the previous file. Still Picture 1 Press PAUSE/STEP tray.
Programmed Playback CD VCD2.0 with Audio CD Programmed Playback VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program On a setup Video CD with menu mode to enter during playback or in the Program Edit mode. the E mark will appear to the right of the word the right side of the menu screen. on to PBC, you the use must set PBC to Off on the function. See page 17. Program contain 30 tracks.
Additional Information Speaker Setup Adjust the following settings for the built-in 5.1 channel Last Condition surround decoder. DVD Disc Audio R Disc Menu Code Volume Menu Progressive Scan 1 ft Test If you load the latest stop player. tings memorized, ly recalled. Small Distance Language switch off the 0 dB Size Aspect user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or R Front L Rating TV VCD1.
Radio Operation Presetting You can 30 stations for FM and AM preset make tuning, the radio stations (MW). Before that you have turned down the vol- sure Preset radio stations in the DVD/CD receiver's memory first (see "Presetting radio stations" on the left). ume.
Other Function Sleep Timer You set the DVD/CD receiver to turn off automati- can cally 1 at a specified Selecting input source You other units connected to the can use VCRs VIDEO1, VIDEO2 time. Press SLEEP to set the desired The SLEEP indicator and play 2 Setting sleep sleep time. time appears in the dis- window. Each time you press SLEEP the in the following order. setting changes SLEEP 90→80→70→60→50→40→30→20→10→ OFF Optical connector.
Language Code List Enter the appropriate (See page 16).
Code List Country Enter the appropriate code number for the initial setting "Country Code" (See page 18).
Troubleshooting Check the following guide for the possible of cause a before problem contacting service. Cause Symptom Correction No power. ? The power cord is disconnected. ? the power cord wall outlet. The power is on, but the DVD/CD receiver ? No disc is inserted. ? Insert does not work. No Plug (Check lit.) picture. ? The TV is not set to receive DVD signal ? output.
Troubleshooting (Cont'd) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The signal strength weak (when tuning tuning). of the stations is too ? Tune in the station manually. ? Preset the stations (page 27).
Specification Power Power [Genral] External dimensions AM [MW] H x D) x 82 Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL Designs mm 5°C to 35°C, Operation laser, wavelength More than 70 dB 650 (1 kHz, NOP, 20 kHz (1 kHz, at 12W position) (20 kHz LPF/A-Filter) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 2 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, negative sync.
P/NO: 3828R-D037D