Owner's Manual

9
Presetting
the radio stations
ote
Adjust
POWER switch on the
backpanel
to select ON
before
operation
You can
preset
50 stations for FM and AM. Before
tuning,
make sure that
you
have turned down the
volume to the minimum.
1
Press SELECT
(or
AV/FUNC. on
the remote
control)
to select the
frequency
(AM
or
FM)
you
want.
Every
time
you press
this
button,
AM and FM
changes alternately.
2
Press TUNING
(-/+) (or TUN.(-/+)
on
the remote
control)
until the
frequency
indication starts to
change.
otes
?
Automatic
Tuning
Press TUNING
(-/+) (or TUN.(-/+)
on
the remote
control)
for more than 0.5 seconds.
-
Scanning stops
when the unit tunes in a station.
?
Manual
Tuning
Press TUNING
(-/+) (or TUN.(-/+)
on
the remote
control)
briefly
and
repeatedly.
3
Press MEMORY.
A
preset
number will flash in the
display
window.
4
Press PRESET
(-/+)
to select the
preset
number
you
want.
5
Press MEMORY.
-
The station is stored.
6
Repeat steps
2
to
5
to store other stations.
To clear all the memorized stations
Press and hold MEMORY for about two
seconds,
"MEM
CLEAR"
appears
on the
display
window and then
press
MEMORY,
the stations are cleared.
For
your
reference
If all stations have
already
been
entered,
FULL
message
will
appear
in the
display
window for a moment and then
a
preset
number will blink. To
change
the
preset
number,
follow the
steps
4-5.
To recall
presets
Press and hold PRESET
(-/+)
until the desired
preset
number
appears
or
press
it
repeatedly.
1
Press SELECT
(or
AV/FUNC. on
the remote
control)
to select the
frequency
(AM
or
FM)
you
want.
Every
time
you press
this
button,
AM and FM
changes alternately.
The last received station is tuned in.
2
Press PRESET
(-/+)
repeatedly
to select the
preset
station
you
want.
-
Each time
you press
the
button,
the unit tunes in
one
preset
station at a time.
3
Adjust
the
volume
by pressing
VOLUME
(-/+)
repeatedly.
To listen to
non-preset
radio stations
?
Use manual or automatic
tuning
in
step
2.
?
For automatic
tuning, press
and hold TUNING
(-/+)
(or TUN.(-/+)
on
the remote
control).
To turn off the radio
Press POWER to turn the unit off or select another
function mode.
For
your
reference
?
If an FM
program
is
noisy
Press MO./ST. so that "STEREO"
disappears
on the
display
window. There will be no stereo
effect,
but the
reception
will be
improved.
Press MO./ST
again
to
restore the stereo effect.
?
To
improve reception
Repose
the
supplied
antennas.
Listening
to the radio