Owner's Manual

HOOKUP
21
Before
Operation (Continued)
PANO
(PANORAMA)
This control extends the front stereo
image
to include
the surround
speakers
for an
exciting "wraparound"
effect
with
side-wall
imaging.
It
is
particularly
effective
for
recordings
which have
strong
left- or
right-channel
elements
in
the
mix,
as these are detected and accen-
tuated
by
the Panorama
process.
C
WIDT
(Center Width)
This control allows center-channel sounds to be
posi-
tioned between the center
speaker
and the
left/right
speakers
over a
range
of
eight steps. Step
"3" uses a
combination of all three front
speakers
to
give
the best
vocal
imaging
and most seamless
soundstage presen-
tation,
and is recommended for most
recordings. Step
"0"
places
all center sound
in
the center
speaker. Step
"7"
places
all center sound
equally
in
the
left/right
speakers, just
as
in
conventional stereo.
DIMEN
(DIMENSION)
This control allows the user to
gradually adjust
the
sound field either towards the front or the rear. This can
be useful to
help
achieve the desired balance from all
the
speakers
with
certain
recordings
that
may
contain
either too much or too little
spatial
effect.
Step
"0" is the
recommended
setting,
which has no effect on the
sound.
Steps
1, 2,
and 3
gradually
move the sound for-
ward,
and
steps
--1, --2,
and --3 move the sound
towards the surrounds.
Sound Level
Yo u can set the sound level of the desired channel.
1
Press
LEVEL
on the remote control.
The level indicator
will
appear
in
the
Display
Window.
2
Press
/
to select a desired
speaker
to set.
Each time
you press
the
/
button,
it
is
changed
in
the
following
order;
FL
(Front Left)
→
C
(Center)
→
FR
(Front Right)
→
SR
(Surround Right)
→
SL
(Surround Left)
→
SW
(Subwoofer)
→
FL
(Front Left)
...
3
Press
/
to
adjust
the sound level of the
selected channel.
(-6dB
~
+6dB)
4
Repeat step
2-3 and
adjust
the sound level of
the other channels.
5
If
setting
is
complete, press
LEVEL.
Test Tone
This function allows
you
to can
easily adjust
the sound
balance of the
speakers
from the listener's
position.
1
Select the test tone mode
by pressing
TEST
TONE.
A
hiss noise comes out for
2
seconds from each
speakers
in
the
following
order;
FL
(Front Left)
→
C
(Center)
→
FR
(Front Right)
→
SR
(Surround Right)
→
SL
(Surround Left)
→
SW
(Subwoofer)
→
FL
(Front Left)
...
2
You can
adjust
the sound level while the test
tone is
operating.
First
press
LEVEL
then
press
the
/
buttons,
so that the sound level from
all the
speakers
is same from the listener's
position.
?
During
the test
tone,
if
you adjust
the sound
level,
it will
be
paused
in
the current
speaker
channel.
3
If
setting
is
complete, press
TEST TONE.
XTS
(Excellent
True
Sound)
You can
enjoy
the vivid
stereophonic
sound of the
digital original
source without
any signal
distortion.
Each time
you press
XTS
during
2
channel
mode,
the
setting changes
in
the
following
order.
XTS-1→XTS-2→XTS-3→XTSOFF...
Tips:
XTS-
1:
When
playing
the movie
with
the weak bass
sound
relatively
to the
general
music,
it
enforces the sense of sound at woofer
for
you
to
satisfy
with.
XTS-
2: In
the mode of
2
CH
BYPASS,
It
creates the
high display
effect
by playing
the sound
source via the rear
speakers
same as the
front
speakers.
XTS- 3: You can
operate
both XTS-
1
and XTS-
2
simultaneously
and
it
can
complement
the
relative
degrading
of the sound
pitch
of the
woofer at the XTS-
2
mode.
Note:
The XTS-
2
mode is
temporarily
disabled when
changing
from
2.1
CH to 5.1 CH and
it
is enabled when
changing
it
to
2.1
CH.
XTS
pro
The
unique
sound
quality
of the LG
Technology
creates
the
optimum
sound for
you
to
play
the
perfect playback
of the
original
sound and to feel the
living
sound source.
Each time
you press
XTS
pro
the
setting changes
in
the
following
order.
XTS-PRO ON
→
XTS-PRO OFF