Owner's Manual

11
Connections to Your
TV
Make one of the
following
connections,
depending
on the
capabilities
of
your existing equipment.
When
using
the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT
jacks,
set the VIDEO OUT
SELECT switch to COMPONENT. When
using
the
SCART
jack,
set the VIDEO OUTPUT SELECT
switch to SCART.
Tips
Depending
on
your
TV and other
equipment you
wish to
connect,
there are various
ways you
could
connect the recorder. Use
only
one of the
connections described below.
Please refer to the manuals of
your
TV, VCR,
Stereo
System
or other devices as
necessary
to
make the best connections.
Caution
Make sure the recorder is connected
directly
to the
TV. Tune the TV to the correct video
input
channel.
Do not connect the recorder's AUDIO OUT
jack
to
the
phono
in
jack (record deck)
of
your
audio
system.
Do not connect
your
recorder via
your
VCR. The
DVD
image
could be distorted
by
the
copy
protection system.
S-Video connection
Connect the S-VIDEO OUT
jack
on the recorder to the
S-Video in
jack
on the TV
using
the S-Video cable
(S).
Video connection
Connect the VIDEO OUT
jack
on the recorder to the
video in
jack
on the TV
using
the video cable
(V).
Audio
(Left/Right)
Connection
Connect the left and
right
AUDIO OUT
jacks
of the
recorder to the audio left and
right
IN
jacks
on the TV
using
the audio cables
(A).
Do not connect the
recorder's AUDIO OUT
jack
to the
phono
in
jack
(record deck)
of
your
audio
system.
Component
Video connection
Connect the COMPONENT / PROGRESSIVE SCAN
VIDEO OUT
jacks
on the recorder to the
corresponding input jacks
on the TV
using
an Y Pb Pr
cable
(C).
If
your
television is a
high-definition
or
"digital ready"
television,
you may
take
advantage
of the recorder's
progressive
scan
output
for the
highest
video
resolution
possible.
If
your
TV does not
accept
the
Progressive
Scan
format,
the
picture
will
appear
scrambled if
you try Progressive
Scan on the recorder.
Set the resolution to
576p using
RESOLUTION button
for
progressive signal.
Note:
Progressive
scan does not work with the
analog
video
connections
(yellow
VIDEO OUT
jack)
or S-VIDEO
connection.
SCART connection
Connect the EURO AV1 AUDIO/VIDEO scart
jack
on
the recorder to the
corresponding
in
jacks
on the TV
using
the scart cable
(T).
Optical Digital
Connection
Connect an
optical output
of DVD
Player (or Digital
Device
etc)
to the OPTICAL IN connector on the
recorder
using
the
optical
cable
(O).
Note:
When the
Optical jack
is
connected,
audio will
output
from
speakers
of the main unit
amplifier only
but the
audio
output
is not available via the HDMI and AV
jacks.
Caution
If the resolution is set to
720p
or
1080i,
the VIDEO
OUT,
S-VIDEO OUT and COMPONENT VIDEO OUT
connections are not available.
DVD
Player (or Digital
Device,
etc)
OPTICAL
OUT
o
Rear of the HDD/DVD
Recorder Receiver
AUDIO INPUT
VIDEO
INPUT
SCART INPUT
Pr
Pb
Y
COMPONENT VIDEO INPUT
Rear of TV
A V
T
C
S-VIDEO
INPUT
S
ANT.IN
SCART