LH-T1000A JA7IDLS DVD/CD RECEIVER OWNER'S MANUAL MODEL: KR-6840HTS CD-R/RW Before connecting up, operating or repairing this read this instruction booklet carefully and please completely.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute risk of electric a shock to persons.
Table of Contents DVDAudioDiscs...........................23 Introduction Precautions.............................5 MovingtoanotherGROUP..............23 ViewinganotherPAGE.................23 Audio CD and MP3/WMA Disc Operation 24-25 an Audio CD and MP3/WMA Disc 24 Playing .24 NotesonMP3/WMARecordings. NotesonDiscs..........................5 Pause.............................25 AboutSymbols..........................5 6 Display Window MovingtoanotherTrack...............25 RepeatTrack/All/Off...........
Before Use Playable Disc-related terms Discs Title (8cm/12cmdisc) or you to locate it Video CD (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) play a DVD-RW, DVD+RW, Kodak PICTURE, SVCD, CD and CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files. otes Depending or itself, some cannot be -- on the conditions of the the CD-R/RW ment CD-R/RW played on recording equip(or DVD-RW, DVD+RW) disc (or DVD-RW, DVD+RW) discs the unit.
Before Use (Continued) Storing Precautions After the unit Handling When shipping the unit original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. The When setting up the unit The picture and sound of a nearby TV, VCR, or radio during playback. In this case, position may be disturbed the unit away from the TV, VCR, unit after removing the disc.
Front Panel Buttons and DISC Display Window DISPLAY Window Tray FUNCTION VOLUME controller PHONES connector OPEN/CLOSE Remote sensor OPEN/CLOSE R STANDBY/ON P/STEP MONO/ST. PLAY STOP/MEM. - TUNING FUNCTION + DOWN TUNING red when the receiver is in Standby mode STOP/MEMORY (off).
Remote Control Buttons OPEN/CLOSE POWER AUX BAND CD/DVD MUTE DIMMER SLEEP INTRODUC NUMBER REPEAT A-B REPEAT SOUND MODE PROGRAM PRO LOGIC II CLEAR AUDIO VOLUME PRESET(+/-) (+/-) SUBTITLE ZOOM RETURN ENTER ARROW For use on a GUI in highlighting menu a selection MENU Use the MENU button to the menu screen DISPLAY screen, TITLE and included screen. STOP MENU PAUSE/STEP display PLAY on DVD SKIP/SCAN video discs.
Rear Panel POWER CORD SUBWOOFER LINE OUT Connector SPEAKER Connectors VIDEO 1 AUDIO Connectors Input (L/R) VIDEO 2 AUDIO Input (L/R) AUDIO OUT Connectors (L/R) Connectors MONITOR VIDEO OUT Connector COMPONENT VIDEO OUT/ PROGRESSIVE SCAN Connect to SUBWOOFER AUDIO MON TOR VIDEO OUT LINE OUT a (Y COMPONENT VIDEO OUT (PROGRESSIVE SCAN) YP b Pr DIGITAL VID 88 48 8 8 OUT COAXIAL VIDEO OUT DIGITAL IN E O SPEAKERS COAXIAL DIGITAL IN Connector S-VIDEO OUT Connector VIDEO 1 (Input) VI
Connections to a TV Connecting Make the one of the ips Depending following connections, depending existing equipment. on Progressive Scan (ColorStream of your capabilities If your television is video resolution on Please refer to the manuals of your TV, VCR, Stereo or other devices as necessary to make the System best connections. 1 Caution sure the DVD/CD receiver is connected to the TV. Select the correct AV -- or "digital ready" directly your TV.
Connections Connecting Connect 1 Connect 2 Connect 3 Connect 4 Connect 5 to (Continued) Optional Equipment a VCR to the VIDEO 1 connectors. a additional VCR to the VIDEO 2 connectors. an optical output an optical input an coaxial of DVD of DVD Player (or Digital Player (or Digital Device Device to the OPTICAL IN connector. etc) etc) to the OPTICAL OUT connector. output of DVD Player (or Digital Device etc) to the COAXIAL DIGITAL IN connector.
Connections Aerial Connections Connect the supplied FM/AM aerial for listening to the radio. loop aerial to the AM aerial connector. Connect the AM Connect he FM wire aerial to the FM aerial connector.
Connections (Continued) Connection Speaker System Connect the speakers using To obtain the best possible the supplied speaker surround sound, cords. adjust the speaker parameters (volume, distance, etc.).
Connections (Continued) Speaker Positioning In the case of normal position the 6 use speakers (2 front speakers, centre speaker, 2 rear and sub- speakers woofer). If you want to subwoofer. ? ? play the excellent bass sound, DTS Front speakers According to your listening position speakers to 45 degree. Centre speaker speakers The centre ? and front set up the speakers are digital for speakers ideally the surround equal same or Dolby Digital surround, distance.
Before Mini Operation Glossary for Audio Stream & Surround mode Sound Mode You enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD compact discs, etc.bearing the trademark.
Before General This manual Operation (Continued) Temporary Explanation basic instructions for operating the require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by gives TITLE DVD/CD receiver. Some DVDs the DVD/CD receiver is not available or on CHAPT GROUP TRACK General screen.
Before Operation (Continued) On-Screen Display (Continued) d DVD-A Items Group Function (Press 3/4 to select desired item) Number 2/6 Track Number 1 /12 Time search 0:10:15 Selection Method Shows the current group number and total number of groups, and skips to the desired group number. 1/2,or Numbers, ENTER Shows the current track number and total number 1/2,or Numbers, ENTER of tracks, and Shows the skips to the desired track number. elapsed playing time.
Before Initial You Operation (Continued) set your can Picture Settings Personal Preferences own on the player. TV Aspect nected. Initial 1 DVD-V General Settings Operation The setup Displays menu above and below the appears. Scan is English 16:9 Wide: Select when Disc Menu French Rating German Disc Audio 4:3 Letterbox Spanish Disc Subtitle 4:3 Panscan Italian Disc Menu 16:9 Wide Code Aspect Language Scan Chinese Rating Polish Country Hungarian TV 5.
Before Operation (Continued) Speaker Setup 5.1 Auto Speaker settings DVD-V You DVD-A Play can DVD-V DVD-A set up the DVD/CD receiver so a DVD disc starts playing whenever the DVD is insert- automatically Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setup", page 28.) ed.
Before Operation (Continued) Parental Control Rating DVD-V Enter the code of DVD-V Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain Code Country scenes on the disc. These scenes are are Rating Country TV 7 Disc Menu 6 TV Language Progressive Scan Speaker Setup Others 5 Rating Country Code Aspect Menu 5.1 8 Disc Subtitle 1 4 Code 3 Aspect 2 5.
Operation Playing a with DVD and Video CD DVD and Video CD Playback Setup Turn on DVD-V General Features VCD2.0 DVD-A the TV and select the video input VCD1.1 ote source con- nected to the DVD/CD receiver. Audio the 1 system: Turn input source on the audio 2 Load your chosen disc in the playback side facing down. 3 Press OPEN/CLOSE to close the READING appears starts available system and select connected to the DVD/CD receiver. Press OPEN/CLOSE to open the disc automatically.
DVD and Video CD General Features Still Picture and VCD2.0 DVD-V 1 To VCD1.1 go into PAUSE mode. now picture frame-by-frame by repeatedly on the remote control. The using operation 3 To exit 1 To permitted in some pictures, picture Repeat The VCD2.0 1 Press SLOW SCAN m The Repeat or The VCD1.1 M during playback. On 2UsetheSLOWSCANmorMtoselectthe required speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (forward).
DVD and Video CD General Features 3D Surround This unit Operation (continued) VCD2.0 DVD-V 3 VCD1.1 4 3D Surround effect, which simulates multi-channel audio playback from two produce can speakers, instead of the speakers normally required to listen to more channel audio from 1 a home theater five 5 or MODE during play- Zoom VCD2.0 DVD-V Press ZOOM or the repeatedly, still playback to acti- magnification the 1 Press TITLE.
DVD and Video CD DVD Audio Discs Operation DVD-A Viewing another PAGE Since DVD Audio discs DVD Audio is a new disc format building on the success can hold DVD-A a lot of content, there on the disc. of DVD to various ways to see what's available 1 Press DISPLAY during playback. new 2 Press 3/4 to select be 3 Press 1/2 to select provide high quality, multi-channel audio for a experience in audio quality.
Audio and MP3/WMA Disc Playing CD an Operation Audio CD and MP3/WMA Disc MP3 play can MP3/WMA MPEG1 audio files that have on disc and close the tray. CD; Audio CD menu appears on the TV screen go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 The player compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files".
Audio and MP3/WMA Disc CD Pause 1 MP3 Press PAUSE/STEP Operation (Continued) WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To 1 press repeat Press SKIP/SCAN . or > Press SKIP/SCAN . twice In previous case MP3 WMA briefly during or step back to Repeat icon and "A Repeat to of audio CD, to go directly to any track, enter using the numbered buttons (0-9) during playback. " appears again the on menu screen. at your chosen end point.
JPEG Disc Viewing Operation JPEG disc a Press SKIP/SCAN . This DVD/CD receiver play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert 1 a can disc and close the The MP3/WMA-JPEG choice TV to another File Moving JPEG menu appears on the during The DVD/CD receiver will 2 To return to the slide screen. > once or during viewing a previous file. to the Still Picture 1 Press PAUSE/STEP tray.
Programmed Playback CD VCD2.0 with Audio CD Programmed Playback VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program a setup Video CD with PBC, you must set PBC to Off on the menu to use the Program function. See page 18. contain 30 tracks. can Press PROGRAM mode to enter the E The the on with Video CD ote On Program 1 WMA Programmed Playback and MP3/WMA Disc The MP3 during playback or in Program Edit mode.
Additional Information Speaker Setup Adjust the following settings for the built-in 5.1 channel Last Condition surround decoder. DVD Disc Audio R Disc Menu Code Volume Menu Language Progressive Scan switch off the player. If you load a disc that tings memorized, the latest stop position is ly recalled. 0 dB Size Aspect Small Distance settings user for the last disc that you have viewed.
Radio Operation the radio stations Presetting You can tuning, 30 stations for FM and AM preset make (MW). Before that you have turned down the vol- sure Preset radio stations in the DVD/CD receiver's memory (see "Presetting radio stations" on the left). first ume. Press BAND 1 on the remote control FM 2 3 repeatedly on (MW) appears in the display AM or And then every time you press AM (MW) changes alternately.
Other Function Sleep Timer You set the DVD/CD receiver to turn off automati- can cally 1 at a specified Selecting input source You other units connected to the can use VCRs or VIDEO1, VIDEO2 connectors, Coaxial time. Press SLEEP to set the desired The SLEEP indicator and play 2 Setting sleep sleep time. time appears in the dis- window. Each time you press SLEEP the in the following order.
Language Code Enter the (See appropriate 17).
Code List Country Enter the appropriate code number for the initial setting "Country Code" (See page 19).
Troubleshooting Check the following guide for the possible cause of a before problem contacting Cause Symptom Correction No power. ? The power cord is disconnected. ? The power is on, but the DVD/CD receiver ? No disc is inserted. ? Plug the power cord wall outlet. securely Insert that the DVD or, a disc. (Check ? The TV is not set to receive DVD signal ? output. Select the on the TV The video cable is not connected ? securely.
Troubleshooting (Cont'd) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? ? Connect the antenna Adjust securely. the antennas and connect an external antenna if necessary. ? The signal strength of the stations is (when tuning in with automatic tuning). too ?T une in the station weak ? No stations have been preset preset or ? Preset the stations manually. (page 29).
Specification Power Power [Genral] Refer to main label Mass External dimensions (W x H x D) conditions [CD/VD] AM [MW] 55 x 350 cover) cover) mm 5°C to 35°C, Semiconductor laser, Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL 625/50, NTSC 525/60 Operation status: Horizontal 650 wavelength REF NC nm 150 Hz to 18 kHz More than 70 dB 20 kHz (1 kHz, NOP, LPF/A-Filter) More than 70 dB (1 kH
P/N: 3834RH0025B
