LH-T1000A NA6BBLS DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-T1000 (Main Unit: LH-T1000A, Speakers: LHS-T1000T, LHS-T1000C LHS-T1000W) CD-R/RW Before repairing this product, booklet carefully and connecting up, operating please read completely.
Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric This shock to persons.
Table of Contents DVDAudioDiscs...........................23 Introduction Precautions.............................5 MovingtoanotherGROUP..............23 ViewinganotherPAGE.................23 Audio CD and MP3/WMA Disc Operation 24-25 24 Playing an Audio CD and MP3/WMA Disc .24 NotesonMP3/WMARecordings. NotesonDiscs..........................5 Pause.............................25 AboutSymbols..........................5 Front Panel Buttons and Display Window 6 MovingtoanotherTrack...............
Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or you to locate it Video CD (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) play a only) or accompanying feature content additional feature content, or music album. Each title is assigned a title reference number (8cm/12cmdisc) can video discs DVD video discs DVD audio discs In addition, this unit (DVD DVD-RW, DVD+RW, SVCD, CD and CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files.
Before Use (Continued) Storing Precautions After the unit Handling shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position When the unit away from the TV, VCR, unit after removing the disc.
Front Panel Buttons and DISC Display Window DISPLAY Window Tray Microphone FUNCTION Jack VOLUME controller Microphone PHONES Volume Control connector OPEN/CLOSE Remote sensor OPEN/CLOSE MIC R MIC VOL STANDBY/ON MIN P/STEP MONO/ST. PLAY STOP/MEM. - TUNING FUNCTION + MAX DOWN TUNING red when the receiver is in Standby mode STOP/MEMORY (off).
Remote Control Buttons OPEN/CLOSE POWER AUX BAND CD/DVD MUTE DIMMER KARAOKE INTRODUC SLEEP NUMBER REPEAT A-B REPEAT SOUND MODE PROGRAM PRO LOGIC II CLEAR AUDIO VOLUME PRESET(+/-) (+/-) SUBTITLE ZOOM RETURN ENTER ARROW For use on a GUI in highlighting menu a selection DISPLAY screen, TITLE and MENU screen.
Rear Panel POWER CORD SUBWOOFER LINE OUT Connector SPEAKER Connectors VIDEO 1 AUDIO Input (L/R) Connectors VIDEO 2 AUDIO Input (L/R) Connectors AUDIO OUT (L/R) Connectors MONITOR VIDEO OUT Connector COMPONENT VIDEO OUT/ PROGRESSIVE SCAN Connect to SUBWOOFER AUDIO MON TOR VIDEO OUT LINE OUT a (Y TV with Y Pb Pr COMPONENT VIDEO OUT (PROGRESSIVE SCAN) YP b Pr DIGITAL VID 88 48 8 8 OUT COAXIAL VIDEO OUT DIGITAL IN E O SPEAKERS COAXIAL DIGITAL IN Connector S-VIDEO OUT Connector VIDEO
Connections Connecting Make the to a TV of the following connections, depending capabilities of your existing equipment. one ips Depending on Progressive Scan (ColorStream If your television is your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD receiver. Use one of the connections described below. best connections. 1 Caution -- Make sure the DVD/CD receiver is connected to the TV. Select the correct AV -- directly your TV.
Connections Connecting Connect 1 Connect 2 Connect 3 Connect 4 Connect 5 to (Continued) Optional Equipment a VCR to the VIDEO 1 connectors. a additional VCR to the VIDEO 2 connectors. of DVD an optical output an optical input an coaxial output of DVD of DVD Player (or Digital Player (or Digital Device Device Player (or Digital etc) Device to the OPTICAL IN connector. etc) to the OPTICAL OUT connector. etc) to the COAXIAL DIGITAL IN connector.
Connections Aerial Connections Connect the supplied FM/AM aerial for listening to the radio. Connect the AM loop aerial to the AM aerial connector. Connect he FM wire aerial to the FM aerial connector.
Connections (Continued) Speaker System Connection Connect the the speakers using To obtain the best possible supplied speaker surround sound, cords. adjust the speaker parameters (volume, distance, etc.).
Connections (Continued) Speaker Positioning In the case of normal position the 6 use speakers (2 front centre speakers, speaker, 2 rear speakers and sub- woofer). If you want to subwoofer. ? ? ? play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a Front speakers According to your listening position speakers to 45 degree. set up the speakers for equal distance.
Before Mini Operation Glossary for Audio Stream & Surround mode Sound Mode You enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark.
Before General This manual Operation (Continued) Temporary Explanation basic instructions for operating the DVD/CD receiver. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by gives the DVD/CD receiver is not available or on TITLE CHAPT GROUP TRACK General screen. playback 2 3 AB displayed on the TV changed on the menu.
Before Operation (Continued) On-Screen Display (Continued) d DVD-A Items Group Function (Press 3/4 to select desired item) Number 2/6 Track Number 1 /12 Time search 0:10:15 Selection Method Shows the current group number and total number of groups, and skips to the desired group number. 1/2,or Numbers, ENTER Shows the current track number and total number of tracks, and skips to the desired track number. 1/2,or Numbers, ENTER Shows the elapsed playing time.
Before Initial Yo u Operation (Continued) Picture Settings set your own Personal Preferences on the can player. TV Aspect Initial Settings General Operation appears. Scan Disc Subtitle English 16:9 Wide: Select when Disc Menu French Rating German Disc Audio 4:3 Letterbox Spanish Disc Subtitle 4:3 Panscan Italian Disc Menu 16:9 Wide Chinese Rating Polish Country Hungarian TV Other------------ Menu Code Aspect Language Scan Speaker Setup played cut off).
Before Operation (Continued) Speaker Setup 5.1 Auto Speaker settings DVD-V Play DVD-V DVD-A set up the DVD/CD receiver so a DVD disc automatically starts playing whenever the DVD is insert- You DVD-A Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setup", page 28.) can ed.
Before Operation (Continued) Parental Control Country Rating Enter the code of Movies DVD-V DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control on information that certain to the applies the disc.
Operation Playing a with DVD and Video CD DVD and Video CD Playback Setup Turn on DVD-V General Features VCD2.0 DVD-A the TV and select the video input VCD1.1 ote source con- nected to the DVD/CD receiver. available Audio system: Turn on the audio system and select the input source connected to the DVD/CD receiver. 1 DVD-V 2 Load your chosen disc in the tray, with the playback side facing down. 3 Press OPEN/CLOSE to close the tray. READING appears on the TV screen, and automatically.
DVD and Video CD General Features Still Picture and VCD2.0 DVD-V DVD Audio Discs (continued) 1 To Frame-by-frame playback a during playback. The DVD/CD receiver will now go into PAUSE mode. advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote can 3 To return to normal play, The Repeat Group icon appears 3 To exit 2 To using a DVD audio disc that includes pictures, operation may be permitted in some picture The VCD1.
DVD and Video CD General Features 3D Surround (continued) VCD2.0 DVD-V Operation 3 4 3D Surround effect, which simulates multi-channel audio playback from two This unit produce can speakers, instead of the speakers normally required to listen to five more multi- channel audio from home theater system. 1 Press SOUND MODE to select "3D SUR" 5 or a during play- back. VCD2.0 or still playback to acti- 1 Press TITLE. steps. If the current title has move the zoomed through picture.
DVD and Video CD DVD Audio Discs Operation DVD-A Viewing another PAGE Since DVD Audio discs DVD Audio is a new disc format building on the success of DVD to provide high quality, multi-channel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself. DVD Audio provide higher quality stereo than Audio CDs with a sampling rate of up to 192kHz (compared to 44.1kHz for CDs).
Audio and MP3/WMA Disc Playing CD an Operation Audio CD and MP3/WMA Disc MP3 MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes MP3/WMA Recordings on right. Insert Audio 1 on MP3/WMA An MP3 file is audio data play can disc and close the tray. CD; Audio CD menu appears compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files".
Audio and MP3/WMA Disc Pause CD MP3 1 Press PAUSE/STEP Operation (Continued) WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or press The Moving Press SKIP/SCAN . or > playback to go to the next track beginning of the current track. Press SKIP/SCAN . twice the previous track.
JPEG Disc Viewing Operation JPEG disc a Press SKIP/SCAN . This DVD/CD receiver play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert to another File Moving JPEG can disc and close the tray. The MP3/WMA-JPEG choice menu appears TV screen. on the during viewing a to the previous file. once to advance to the next file or picture Still Picture 1 Press PAUSE/STEP a > or during The DVD/CD receiver will slide show.
Programmed Playback Programmed Playback CD VCD2.0 with Audio CD VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program On Video CD with PBC, you must set PBC to Off on the setup menu to use the Program function. See page 18. a contain 30 tracks. can Press PROGRAM mode to enter during playback or in the Program Edit mode. the stop E mark will appear to the right of the word the right side of the menu screen.
Additional Information Speaker Setup Adjust the following settings for the built-in 5.1 channel Last Condition surround decoder. DVD Disc Audio Disc Menu Country TV Code Volume 0dB Size Aspect Menu R Front L Rating Progressive Scan tings memorized, ly recalled. Small Distance Language VCD1.1 This DVD/CD receiver memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player.
Additional Using 1 2 Information(Continued) the Karaoke Function Load a 8 karaoke disc. 3 ( 3.5mm). a microphone Press PLAY to start Adjust MIC VOL melody, 5 song. playback. If you want to set KARAOKE 6-8. Press KARAOKE 6 KARAOKE menu option a display changes as desired item (ECHO, EFFECT). Voice1 V2 Voice2 Voice2 V1+V2 Voice1 Voice2 Off None voice None voice Karaoke Special Effects.
Radio Operation the radio stations Presetting You can tuning, preset 30 stations for FM and AM (MW). Before make sure that you have turned down the vol- Preset radio stations in the DVD/CD receiver's memory first (see "Presetting radio stations" on the left). ume. Press BAND 1 on the remote control or to the radio Listening 1 press Press the remote control BAND on FUNCTION repeatedly on AM FM or AM The last received station is tuned in.
Other Function Sleep Timer You set the DVD/CD receiver to turn off automati- can cally 1 at a Setting specified Selecting input can use VCRs or other units connected to the VIDEO1, VIDEO2 connectors, Coaxial time. Press SLEEP to set the desired The SLEEP indicator and sleep sleep time appears time. in the dis- play window. 2 You source Each time you press SLEEP the setting changes in the following order.
Language Code List Enter the appropriate (See page 17).
Country Enter the Code List appropriate code number for the initial setting "Country Code" (See page 19).
Troubleshooting Check the following guide for the possible cause a before problem contacting No power. ? The power is on, but the DVD/CD receiver does not work. picture. ? Correction The power cord is disconnected. ? No disc is inserted. ? ? The TV is not set to receive DVD signal ?T he video cable is not connected ? ? securely. sound or only a very low-level sound is heard.
Troubleshooting (Cont'd) Cause Symptom Radio stations cannot be tuned in. ? The antenna is Correction positioned or connected poorly. ? ? ? The signal strength of the stations is too weak (when tuning in with automatic Connect the antenna securely. the antennas and connect external antenna if necessary. Adjust ?T une in the station an manually. tuning). ? No stations have been preset or preset stations have been cleared (when ? Preset the stations (page 30).
Specification Power Power [Genral] Refer to main label supply consumption Refer to main label Mass External dimensions [CD/VD] (W x H x D) [Tuner] [MW] 55 x 350 at the bottom cover) cover) mm Semiconductor laser, Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL 625/50, NTSC 525/60 to 35°C, Operation status: Horizontal 5% to 85% 650 wavelength nm 150 Hz to 18 kHz More than 70 dB 20 kHz (1 k
