LH-T2240A_NA5SALS_ENG DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-T2240 (Main Unit: LH-T2240A, Speakers: LHS-T2240T, LHS-T2240W) Before repairing this product, booklet carefully and connecting up, operating please read completely.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric This shock to persons.
Contents Introduction.....................4-9 STILL PICTURE AND FRAME-BY-FRAME PLAYBACK.............................17 SymbolusedinthisManual...............4 AbouttheSymbolDisplay.............4 SLOWSCAN...........................17 NotesonDiscs.........................4 REPEATA-B...........................17 HANDLINGDISCS.......................4 REPEAT...............................17 STORINGDISCS.........................4 TIMESEARCH..........................17 CLEANINGDISCS.......................
Introduction To proper use of this product, please read this owner's manual carefully and retain for future About the ensure reference. " Symbol Display " may appear on your TV display during operation and indicates that the function explained in this owner's manual is not available This manual provides information on the operation on that specific DVD video disc. and maintenance of your DVD/CD receiver. Should the unit require service, contact an authorized service location.
Types of Playable Discs DVD (8cm/12cmdisc) Video CD (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) In addition, this unit plays DVD -R, DVD +R, DVD -RW, DVD +RW, and CD-R / CD-RW that This DVD/CD Receiver is contains audio titles, MP3, and/or JPEG files. manufactured for REGIONAL CODE designed and playback of region "5" encoded DVD software.
Disc-related terms PBC: DVD±R/DVD±RW DVD -R and DVD +R are two different standards for recordable DVD drives and discs. This format allows information to be recorded onto the DVD disc DVD +RW and DVD -RW once. are only two standards for re-writable media, meaning the DVD content can be erased and re-recorded. Single-sided discs can hold 4.38 Gigabytes much.
Front Panel VOLUME Control Press "v" to increase volume or press "V" to decrease the volume. TUNING (-/+)/SKIP/SCAN STOP Introducin MONO/STEREO/PAUSE/STEP FUNCTION/PLAY Press and hold down this button about 3 seconds, then press repeatedly to select other function. DISC OPEN/CLOSE Tray MIC VOL. MIC DOWN STANDBY/ON DISPLAY Window Remote Display a microphone. sensor MIC VOL. MIC To connect UP Adjust the (DOWN/UP) microphone volume.
Remote Control OPEN/CLOSE POWER FUNCTION SELECTOR You also select the desired can function with the FUNC./PLAY on the front panel. NUMBER SOUND (p. 24) AUDIO (p. 16) SETUP SUBTITLE an option in the menu. PRESET DISPLAY (p. 12) TITLE (p. 18) to display (+/-): Use included Select programme. TUN-/+ (p. 16) ENTER (left/right/up/down) Selects RETURN (p. 13) b/B/v/V (p. 18) on the title screen DVD video discs. (b/B): To tune in the desired radio SCAN-/+ station.
Rear Panel POWER CORD SPEAKER Connectors FM Antenna Connector Introducin MONITOR OUT Connector AUXILIARY INPUT Connectors AM Do not touch the inner cause Loop Antenna Connectors pins of the jacks permanent damage to the unit. on the rear panel.
Installation and Setup TV Connections Make the of the following connections, depending capabilities of your existing equipment. one on Rear of TV VIDEO INPUT AUDIO INPUT SCART INPUT Tips: ? L your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connections Depending R L on VIDEO Cable V described below.
External Equipment Connections Rear of VCR (or Connection Connect the AUX IN the DVD/CD (L/R) jacks receiver to the AUDIO OUT (L/R) jacks LD player, etc using the audio cables. on on LD AUDIO OUTPUT L the VCR, player, etc) VIDEO OUTPUT R Tip: Press AUX these on the remote control to select input to jacks. AUX appears on the Display Window. Speaker System Connection Connect the the speakers using supplied speaker Front speaker Left speaker InstaliodSeup & Woofer cords.
On-Screen Display general playback status on the TV screen. Some items can be changed using the menu. To use the on-screen display: You display can the Example: On-Screen Display during playing DVD Selection Method Items Title Number 1/3 b / B, Numbers ENTER Press DISPLAY 1. during playback. Press v / V to select 2. The selected item is Press b / B to 3. Chapter item. an highlighted. inputting change the title number).
Initial LANGUAGE Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 13 to 15. To display LANGUAGE English Disc Audio Original Disc Subtitle Off Disc Menu Original and exit the Menu: Press SET UP to display the menu. SET UP will take you back to initial A second press of screen.
AUDIO LOCK Each DVD disc has Set the receiver's (Parental Control) LOCK variety of audio output options. AUDIO options according to the a type of audio system you use. Rating Unlock Password **** Country LK Code AUDIO DRC On Vocal On Move DVD Rating Some movies contain Move Select Select for children to view. that may not be suitable of these discs contain scenes Many parental control information that applies to the complete disc or to certain scenes on the disc.
Password You enter or can OTHERS (Security Code) change password. The PBC Registration settings 1. Select "Password" on the LOCK menu then press B. step "New" is 2 as shown left (Rating). "Change" changed. On or highlighted. 3. Enter the new 4-digit code, then press ENTER. Input it again to verify. 4. Press SETUP to exit the menu. If you be OTHERS PBC 2.
Operation Playing a DVD or Video CD General Features Note: PLAYBACK SETUP Press OPEN/CLOSE to open the disc tray and load your chosen disc in the tray, with the 1. playback 2. side down. Unless stated otherwise, all operations described the remote control. Some features may also be available on the Setup menu. MOVING TO ANOTHER TITLE Press OPEN/CLOSE to close the tray. Playback starts automatically. If playback does not start, When press PLAY. another title.
STILL PICTURE AND FRAME-BY-FRAME PLAYBACK REPEAT You Press 1. Press PAUSE/STEP the remote control during playback. Advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly. on DVD Video Discs ? To exit still motion mode, press PLAY. ? SLOW SCAN Press SLOW SCAN - t or T + during playback. ? ? The DVD/CD Receiver will enter SLOW mode. 2. Use the SLOW - t or T + to select the speed: t 1/2, t 1/4, t 1/8, t 1/16 (backward), or T 1/2, T 1/4, T 1/8, T (forward). required 3.
ZOOM Use to zoom enlarge Press ZOOM 1. the video image. during playback or still playback to Each press of the ZOOM button changes the TV screen in the sequence: 400% size 800% size → →1600% size Use the bBvVbuttons to 3. zoomed move through CHECKING THE CONTENTS OF DVD DISCS: MENUS activate the Zoom function. The square frame appears briefly in the right bottom of the picture. 2. DVD Features Special DVDs may offer menus that allow you to access special features.
Playing Audio CD an The DVD/CD Receiver recordings can MP3 Disc MP3 formatted play CD-ROM, CD-R, on or or CD-RW discs. MP3 disc Audio CD Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press PLAY or ENTER and playback starts. 0:00:00 1/12 Audio CD limited follows: within 32 48 kHz (MP3) Sampling frequency: Bit rate: within 32 320kbps (MP3) ?T he player cannot read an MP3 file that has a file extension other than ".mp3".
Audio CD and MP3 Disc Features SEARCH PAUSE Press PAUSE/STEP 1. during playback. To return to 2. press 1. playback, press PLAY, PAUSE/STEP again. ENTER or (. >) briefly during playback track or to return to the beginning or to go to the next of the current track. 2. 3. Press SKIP . twice previous track. You play can any track briefly to go back to the by inputting its number. REPEAT TRACK/ALL/OFF You 1. can play a track/all on a Press REPEAT when disc. playing a disc.
Programmed Playback The programme function enables you to store your favorite tracks from any disc in the receiver memory. A programme 1. Insert a can contain 300 tracks. REPEAT PROGRAMMED TRACKS 1. or AUDIO CD or 2. MP3 Discs: MP3 menu appears.
Viewing JPEG Disc a Using this DVD/CD Receiver you JPEG files. 1. can view discs with Press b / B picture disc and close the tray. The JPEG appears on the TV screen. Insert a during showing clockwise or picture a to rotate the counter clockwise.
the Radio Stations Presetting You can Before Listening Preset radio stations in the DVD/CD Receiver's preset 50 stations for FM and AM (MW). tuning, make that you have turned down sure the volume. (MW) memory first on the remote control until FM appears in the display or AM Press BAND until AM 1. window. display Press and hold TUN. - for about two seconds until the indication starts to Scanning stops change, then release. station. "TUNED" and "STEREO.
Additional Features DIMMER LAST SCENE MEMORY This function will change the brightness of the display window on the front panel during in power-on status. Press the DIMMER This receiver memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the receiver or switch off the receiver. If you load a disc that has the scene memorized, the scene is automatically recalled.
Maintenance and Service Cleaning Refer to the information in this To clean the DVD/CD receiver, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly contacting a chapter before the unit moistened with service technician. Do not HANDLING THE UNIT or use thinner, a mild detergent strong solvents such as these solution. as might damage alcohol, benzine, the surface of the unit.
Language Use this list to Codes your desired language for the Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Check the following guide for the possible cause a before problem contacting No power. ? The power is on, but the DVD/CD Receiver does not work. ? ? picture. Correction The power cord is disconnected. ? No disc is inserted. ? The TV is not set to receive DVD ? signal output. the power cord wall outlet. Plug ? The video cable is not connected ? sound or only a very low-level sound is heard. no ? The connected TV power is turned off.
Cause Symptom Radio stations cannot be tuned in. ? The antenna is Correction positioned or connected poorly. ? ? ? The signal strength of the stations is too weak (when tuning in with automatic Connect the antenna securely. the antennas and connect external antenna if necessary. Adjust ?T une in the station an manually. tuning). ?N stations have been preset or preset stations have been cleared (when o ? Preset the stations (page 23). tuning by scanning preset stations).
Specifications Power Power External dimensions CD/ VD Video FM AM Refer to main label Mass Gen ral Tuner Refer to main label supply consumption [MW] Amp Speakrs Suplied Acesori Designs (W x H D) x 4.
P/N: 3834RH0069A
