Owner's Manual

10
Make one of the
following
connections,
depending
on
the
capabilities
of
your existing equipment.
Tips:
?
Depending
on
your
TV
and other
equipment you
wish
to
connect,
there are various
ways you
could connect
the DVD/CD Receiver. Use one of the connections
described below.
?
Please refer to the manuals of
your
TV, VCR,
Stereo
System
or other devices as
necessary
to make the
best connections.
Caution
?
Make sure the DVD/CD Receiver is connected
directly
to the
TV.
Select the correct
AV
input
on
your
TV.
?
Do not connect
your
DVD/CD Receiver to
TV
via
your
VCR. The
DVD
image
could be distorted
by
the
copy
protection system.
Video connection
Connect the MONITOR OUT
jack
from the DVD/CD
Receiver to the VIDEO
IN
jack
on the
TV
using
the
video cable
supplied (V).
Tip:
If
you
want to connect the DVD/CD receiver to a
TV
with
SCART
socket,
use the SCART-RCA
adapter (T).
Aerial Connections
Connect the
supplied
FM/AM
aerial for
listening
to the
radio.
Connect the
AM
loop
aerial to the
AM
aerial
connector.
Connect he
FM
wire aerial to the
FM
aerial
connector.
Notes:
?T
o
prevent
noise
pickup, keep
the
AM
loop
aerial
away
from
the DVD/CD receiver and other
components.
?
Be sure to
fully
extend the
FM
wire aerial.
?
After
connecting
the
FM
wire
aerial,
keep
it
as horizontal as
possible.
TV
Connections
L
R
AUDIO INPUT
L
VIDEO
INPUT
Rear of TV
Rear of
DVD/CD
receiver
V
SCART INPUT
T
TV/MONITOR
(SCART type)
VIDEO Cable
SCART-RCA
Adaptor
Rear of DVD/CD receiver
Installation and
Setup
FM Wire aerial
(supplied)
AM
Loop
aerial
(supplied)