Owner's Manual

7
Installation and Setup
Make one of the
following
connections,
depending
on
the
capabilities
of
your existing equipment.
Tips:
Depending
on
your
TV and other
equipment you
wish to
connect,
there are various
ways you
could
connect the DVD/CD Receiver. Use one of the
connections described below.
Please refer to the manuals of
your
TV, VCR,
Stereo
System
or other devices as
necessary
to
make the best connections.
Caution:
Make sure the DVD/CD Receiver is connected
directly
to the TV. Select the correct AV
input
on
your
TV.
Do not connect
your
DVD/CD Receiver to TV via
your
VCR. The DVD
image
could be distorted
by
the
copy protection system.
SCART connection
Connect the EURO AV OUTPUT
(TO TV)
socket on
the DVD/CD Receiver to the
corresponding
in
jacks
on the TV
using
the scart cable
(T).
If
your
television is a
high-definition
or
"digital
ready"
television,
you may
take
advantage
of the
DVD/CD Receiver's
progressive
scan
output
for the
highest
video resolution
possible.
If
your
TV does not
accept your
resolution
setting,
abnormal
picture appears
on the screen. Please
read TV's owner's manual then set the resolution
that
your
TV can
accept.
Note:
A
picture
via scart
input
is not
supported.
TV
Connections
Rear of DVD/CD Receiver
SCART INPUT
T
Rear of TV
AUDIO
L
R
Installation and
Setup