LH-T553TB_NA4MLLA DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-T553TB (Main Unit: LH-T553 Speakers: LHS-55TBS, LHS-55TBC, LHS-55TBW) R Before connecting up, operating or repairing product, please read this instruction booklet carefully and completely.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE About the REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Ta ble of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 AudioCDandMP3/WMADisc...............21 Playing an Audio CD and MP3/WMA Disc . . . . . 21 BeforeUse..............................4-5 Pause.............................21 PlayableDiscs...........................4 Precautions.............................5 MovingtoanotherTrack................21 RepeatTrack/All/Off...................21 NotesonDiscs..........................
Before Use Playable Discs ote When (8cm/12cmdisc) DVD audio discs gradually, and keep the volume level low. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the unit.
Before Use (Continued) After the unit Handling When shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position the unit away from the TV, VCR, unit after removing the disc.
Front Panel and Rear Panel Connect a MIC 2 to both sockets. or PHONES connector STANDBY/ON MIC 1/MIC 2 to MIC 1 microphone or STANDBY indicator DISC Lights red when the receiver is in Standby mode (off). Tray FUNCTION/PLAY Press and hold down this button about 3 seconds, then press repeatedly to select other function. VOLUME controller DISPLAY Window OPEN/CLOSE button Remote sensor USB host Connect to a (USB of MONO/STEREO/ multimedia PAUSE/STEP USB port memory etc.
Remote Control Overview POWER OPEN/CLOSE Opens DVD Select the output source (CD/DVD) or Selects DVD System's (FM directly or options in Set the MUTE at Selects AUDIO SOUND MRAKER - SEARCH Removes the PRESET/ Marks CH an audio an language (DVD) audio channel (CD). Accesses On-Screen Selects the TV's or removes Accesses the setup menu b/B/v/V . Selects DVD disc. menu on a source. SCAN-/+(bb/BB) Search backward or REVERSE forward. playback.
Connections TV Connections Make the of the following connections, depending capabilities of your existing equipment. one on Progressive Scan (ColorStream connection If your television is ips Depending your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connection on methods described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.
Connections (Continued) Optional Equipment Connections 1 2 3 Connect a VCR to the AV1 IN connectors. Connect a additional VCR to the AV2 IN connectors. Connect the USB port of a USB Memory (or MP3 player, etc.) to the USB HOST on the front of the unit. Prepa tion VCR OUT IN Additional VCR Front of DVD/CD Receiver IN OUT To AUDIO OUT VIDEO (L/R)/ VIDEO OUT AUDIO (L) AUDIO (R) To AUDIO OUT (L/R)/ VIDEO OUT USB Memory, MP3 Player (or Memory Card Reader, etc.
Connections Assembling the (Continued) and Connecting to Connect the Speakers The front and speaker rear speakers rear speakers using the supplied speaker cords. are detached from the stands. Connect the ble the front and Speaker System Connection speaker cords and assemspeakers from speaker stands as To obtain the best possible surround sound, adjust speaker parameters (volume, distance, etc.). illustrated.
Connections (Continued) Speaker Positioning In the of normal case position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers to play the excellent bass sound, DTS digital surround or Dolby Digital surround, If you want connect a subwoofer. woofer). ?F set up the for speakers equal distance. And by hearing position set up the interval between Centre The ? you should r ont speakers According to your listening position speakers to 45 degree.
Before Mini Operation Glossary for Audio Stream & Surround mode Sound Mode You VCD2.0 DVD VCD1.1 CD enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high audio from DTS program sources such as DVD and compact discs, etc.bearing the trade- quality digital discs, mark.
Before Operation (Continued) On-Screen You Display the general playback status on screen. Some items can be changed using the To use the on-screen display: display can the TV menu. Example: On-Screen Display during playing DVD Video Selection Method Items Title Number 1/3 b / B,Numbers ENTER Press DISPLAY during playback. 1 2Pressv/Vtoselectanitem. highlighted.
Before Initial Operation (Continued) LANGUAGE Settings the menu, you can make various adjustments to items such as picture and sound. You can also By using set Setup for the subtitles and the language among other things. a item, To see For details on display the menu. SET UP will take you back to initial To go to the next level: v Select menu v 4 5 v audio), appears. option then the second level.
Before Operation (Continued) Progressive Scan Progressive AUDIO Scan Video tures with less provides the highest quality pic- flickering. set Progressive Select 1 menu scan set signal, the variety of audio type of audio system you Scan to Off. Progressive "Progressive Scan" on output options. options according to use.
Before LOCK Operation (Continued) Password (Parental Control) You LOCK Unlock Rating **** Password Country can control information certain scenes on on 2 Follow shown left to that may not be suitable of these discs contain parental scenes Many that applies to the complete the disc. Movies and disc scenes are or 3 4 Press SET UP to exit the rated your children from being able to view material you believe is unsuitable.
Before DVD Operation (Continued) OTHERS or Playing Video CD a Operation DVD and Video CD OTHERS Playback Setup PBC On DivX(R) Registration Select Tu rn on DVD VCD2.0 the TV and select the video VCD1.1 input source con- nected to the DVD/CD Receiver. Audio system: Turn and select the on input the audio source Operation system connected to the DVD/CD Receiver. Select Move PBC Set 1 VCD Playback Control to On (PBC) On:Video CDs with PBC or Off.
DVD Video CD or Operation (Continued) Still Picture and General Features DVD-V ote Unless stated otherwise, all operations described use move a DVD-V to another TITLE/GROUP disc has to another title/group (0-9) DVD-V to select DVD-A title disc has a VCD2.0 on a more as you can follows: as Press . or can one more than track, you chapter can move DVD-V during VCD2.0 t 1/4 1/8, 1/16, T 1/8, T 1/4 e xit slow motion To To playback DVD-V 3 mode, press PLAY.
DVD Video CD or General Features Repeat To repeat 1 2 A-B a (continued) briefly Press A-B VCD1.1 Marker Search DVD-V You from can nine a on again A-B appears briefly begins. the TV starting point. 1 screen. at your chosen end on start points To enter title: Press A-B at your chosen A- appears VCD2.0 DVD-A sequence in sequence 3 DVD-V Operation (Continued) the TV screen, and the a playback VCD2.0 2 VCD1.
DVD Video CD or Operation (Continued) DVD Features Special DVD-V A typical DVD Audio disc contains up data capacity of a CD. This additional DVD-A the contents of DVD Video discs: Menus for Then, appropriate option. Alternatively, use the 1/2/3/4 buttons light your selection, then press ENTER. to an DVD-V 2 Some DVD Audio video clips. enjoy DVD a menu, the Otherwise, the disc The menu can list camera guage and subtitle title. menu menu will appear on may appear.
Audio CD Playing Disc MP3/WMA Disc or Operation Audio CD and MP3/WMA an MP3 CD Repeat You WMA can play recordings on MP3/WMA formatted play can CD-ROM, CD-R, or CD-RW discs. 2 Press REPEAT to select Audio CD Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press ? ENTER and playback a disc. disc. The repeat icon ? desired a repeat mode. TRACK: repeats the current track ALL: repeats all the tracks on a disc.
JPEG Disc Viewing This unit a Operation JPEG disc JPEG JPEG disc as play discs with JPEG files. Before playing JPEG recordings, read the JPEG Recordings on right. can Insert disc and close the tray. The JPEG menu appears on the TV 1 notes on ? a screen. with this is limited player follows: upon the size and number of JPEG files, it could take a long time for the DVD/CD Receiver to read the disc's contents.
Programmed Playback MP3 CD WMA The program function enables you to store your favorite tracks from any disc in the receiver memory. A program contain 300 tracks. 1 Insert a disc. REPEAT PROGRAMMED TRACKS 1. Audio CD and MP3/WMA Discs: Audio CD or MP3/WMA menu appears as 1/12 0:00:00 Audio CD Press REPEAT when Press REPEAT to select disc. The repeat icon a desired repeat mode. JPEG ? Program a 1/104 MP3 List playing appears. below. 2.
DivX Disc Using this DVD/CD Receiver you Insert 1 Operation a appears disc and close the on the TV 0:00:00 can play DivX disc. DivX disc tray. The DivX menu compatibility as follows: ?A v ailable with this player is limited screen. 720x576 1/12 resolution size of the DivX file is under (W x H) pixel.
Speaker Setup Adjust the for the built-in 5.1 channel following settings surround decoder. 1 If you connected speakers to your DVD/CD Receiver, setting the distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the Press SET UP. The 2 Use 3 Use setup v menu v appears. listener at the / V to select the AUDIO B to move to Distance option then press then press B to is highlighted.
Additional Information Last Condition Memory This DVD/CD Receiver Controlling DVD memorizes the settings user for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the If you load a disc that has its setthe latest stop position is automatical- the TV Your remote control is DVD/CD Receiver as capable well as of operating your limited functions of LG TV. Follow the instructions below to operate for your LG TV. player.
with Radio Operation Presetting You can preset make tuning, the radio stations 50 stations for FM and AM Before (MW). that you have turned down the vol- sure Preset radio stations in the DVD/CD Receiver's memory first (see "Presetting radio stations" on the left). ume. Press BAND 1 AM 2 3 the remote control until FM on in the (MW) appears display or 2 until the 3 then release. when the DVD/CD Receiver tunes in station.
Other Functions Sleep Timer Setting XTS You You cally 1 set the DVD/CD Receiver to turn off automati- can at a Press SLEEP to set the desired The SLEEP indicator and play 2 time. specified sleep sleep time. time appears in the dis- window. Each time you press SLEEP the setting changes in the following order. SLEEP 180 →150 →120→90→80→70 →60→50→ 40→30→20→10 →OFF ote You can check the time remaining before the DVD/CD receiver turns off. Press SLEEP.
Language Codes Use this list to your desired language for the Disc Audio, Disc Subtitle, Disc Menu.
Tr oubleshooting Check the following guide for the possible cause of a before problem contacting service. Cause Symptom Correction No power. ? The power cord is disconnected. ? the power cord wall outlet. The power is on, but the DVD/CD Receiver ? No disc is inserted. ? Insert does not work. No Plug that the DVD or, audio CD indicator in the DVD display is a disc. (Check lit.) picture. ? The TV is not set to receive DVD signal ? output.
Troubleshooting (Cont'd) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The signal strength weak (when tuning tuning). of the stations is too ?T une in the station in with automatic No stations have been preset or preset ? Preset the stations manually. Refrnce (page 27).
Specifications Power Power Refer to main label Mass Genral External dimensions CD/ VD x H x D) AM [MW] x 54 x 350 Laser Semiconductor Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL mm 5°C to More than 75 dB (1 kHz, NOP, output 87.5 10.
