LH-T6440D JA9LPLS_ENG DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-T6440 (Main Unit: LH-T6440D, Speakers: LHS-T6440T, LHS-T6440C, LHS-T6440W) CD-R/RW Before connecting up, operating or repairing this read this instruction booklet carefully and please completely.
Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute risk of electric a shock to persons.
Table of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 Precautions.............................5 NotesonDiscs..........................5 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . . . . . . . . . . . Operation with Audio CD and MP3/WMA Disc. Playing an Audio CD and MP3/WMA Disc NotesonMP3/WMARecordings. . . . . . .
Before Use Disc-related terms Discs Playable Title (8cm/12cmdisc) or you to locate it Video CD (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) play a DVD-RW, DVD+RW, Kodak PICTURE CD, SVCD and CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files. otes Depending or itself, some cannot be -- -- on the conditions of the the CD-R/RW ment CD-R/RW played on recording equip(or DVD-RW, DVD+RW) disc (or DVD-RW, DVD+RW) discs the unit.
Before Use (Continued) Precautions Storing After the unit Handling discs playing, store the disc in its case. When Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- The light, shipping the unit original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory.
Front Panel and Display Window STANDBY indicator OPEN/CLOSE button Lights red when the receiver is in Standby mode (off). FUNCTION/PLAY button MONO/STEREO/PAUSE/STEP STANDBY/ON button STOP/MEMO.
Remote Control Overview POWER OPEN/CLOSE FUNCTION SELECTOR You also select the desired can function with the FUNCTION/PLAY on the front panel. Press and hold down this button about seconds, then press select other function. 3 NUMBER SLEEP (p. 14) AUDIO (p. 14) (p. 14) (p. 17) SOUND SETUP INTRODUC to (p. 31) SUBTITLE PRO LOGIC II repeatedly (p. 22) RETURN (p. 24) DISPLAY (p. 15) ENTER TITLE ARROW For use on a GUI in highlighting menu a MENU screen. (p.
Rear Panel POWER CORD SPEAKER Connectors COAXIAL DIGITAL IN Connector AV2 AUDIO Input (L/R)/VIDEO AV1 AUDIO IN Connectors Input (L/R)/VIDEO IN Connectors VIDEO OUT SELECTOR Select either COMPONENT VIDEO OUT or RGB signal of EURO AV OUTPUT(TO TV) terminal depending on how you connect the DVD/CD Receiver to the TV. OPTICAL IN Connector S-VIDEO OUT Connector FM Antenna Connector MONITOR VIDEO OUT Connector COMPONENT VIDEO OUT Terminals AM ConnecttoaTVwithYPbPr inputs.
Connections TV Connections Make one of the following connections, depending capabilities of your existing equipment. When using the COMPONENT VIDEO OUT on Progressive the jacks, using the SCART socket, set the VIDEO OUT video resolution SELECTOR to SCART. ips Depending to on (ColorStream a pro) high-definition or connection "digital ready" television, you may take advantage of the DVD/CD Receiver's progressive scan output for the highest set the VIDEO OUT SELECTOR to COMPONENT.
Connections (Continued) Optional Equipment Connections 1 2 3 4 Connect a VCR to the AV1 connectors. Connect a additional VCR to the AV2 connectors. Connect an optical output Connect an coaxial of DVD Player (or Digital Device etc) output of DVD Player (or Digital Device etc) to the OPTICAL IN connector. to the COAXIAL DIGITAL IN connector.
Connections Aerial Connections Connect the supplied FM/AM aerial for listening to the radio. Loop aerial to the AM aerial connector. Connect the AM Connect he FM Wire aerial to the FM aerial connector. AM Loop aerial PREATION (supplied) FM Wire aerial (supplied) otes To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components. Be sure After to fully extend the FM wire aerial. connecting the FM Wire aerial, keep it as horizontal as possible.
Connections (Continued) Speaker System Connection Connect the speakers using To obtain the best possible the supplied speaker surround sound, cords. adjust the speaker parameters (volume, distance, etc.). Front Front speaker (Right) Center speaker (Left) speaker Rear speaker (Left surround) Rear speaker (Right surround) Subwoofer otes Be sure to match the speaker cable to the appropriate terminal on the components: + to + and -- to --.
Connections (Continued) Speaker Positioning In the of normal case position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and sub- woofer). If you want to subwoofer. ? ? play Front speakers According to your listening position speakers to 45 degree. Centre speaker speakers The centre ? the excellent bass sound, DTS and front set up the speakers are digital for speakers ideally the surround equal same or Dolby Digital surround, distance.
Before Operation Glossary for Mini Audio Stream & Surround mode Sound Mode You enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD compact discs, etc.bearing the trademark.
Before General This manual Operation (Continued) Te mporary Feedback Field Icons Explanation basic instructions for operating the require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by gives the DVD/CD receiver is not available or on Repeat TITLE DVD/CD receiver. Some DVDs Repeat Chapter CHAPT Repeat Group (DVD GROUP Repeat TRACK General screen.
Before Operation (Continued) On-Screen Display (Continued) d DVD-A Items Group Function (Press 3/4 to select desired item) Number 2/6 Track Number 1 /12 Time search 0:10:15 DVD Audio Output Shows the current group number and total number of groups, and skips to the desired group number. 1/2,or Numbers, ENTER Shows the current track number and total number 1/2,or Numbers, ENTER of tracks, and Shows the skips to the desired track number. elapsed playing time.
Before Initial Operation (Continued) Picture Setup You can set your own Personal Preferences DVD/CD Receiver. on the TV Aspect nected. Initial 1 General and Settings Operation Setup menu Displays appears. Disc Subtitle Russian Disc Menu English Rating French Country German Code style picture are is played off). screen selected 4:3 Letterbox 4:3 Panscan Disc Menu 16:9 Wide Rating TV Code Aspect Menu Language option.
Before Operation (Continued) Speaker Setup 5.1 Auto Speaker settings DVD-V You DVD-A Play can DVD-V DVD-A set up the DVD/CD Receiver so a DVD disc starts playing whenever the DVD is insert- automatically Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 28.) ed.
Before Operation (Continued) Parental Control Rating DVD-V Enter the code of DVD-V Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain Code Country scenes on the disc. These scenes are are Rating Country TV Menu 5.1 Language Scan Speaker Setup Others 7 Disc Menu 6 5 Rating TV Code Aspect Progressive 8 Disc Subtitle Country 1 4 Code 3 Aspect 2 5.
Operation Playing a with DVD and Video CD DVD and Video CD Playback Setup Turn on DVD-V General Features VCD2.0 DVD-A the TV and select the video input VCD1.1 ote source con- nected to the DVD/CD Receiver. Audio the 1 system: Turn input source the audio on 2 Load your chosen disc in the playback side facing down. 3 Press OPEN/CLOSE to close the READING appears starts available system and select connected to the DVD/CD Receiver. Press OPEN/CLOSE to open the disc automatically.
Operation with DVD and Video CD General Features Still Picture and VCD2.0 DVD-V VCD1.1 go into PAUSE mode. now picture frame-by-frame by repeatedly on the remote PAUSE/STEP con- trol. 3 To return to normal The a during playback. advance the pressing repeat play, Repeat The The 1 To When DVD audio disc that includes this may be permitted in some - m Repeat The + during playback. The DVD/CD Receiver will enter SLOW mode.
with DVD and Video CD Operation General Features 3D Surround This unit produce can VCD2.0 DVD-V a 3 (continued) 3D SUR BYPASS VCD1.1 4 3D Surround effect, which playback from two conventional stereo five more speakers, instead of the speakers normally required to listen to multi- a home theater again 5 VCD2.0 DVD-V during playback. effect, press SOUND press the appropriate number button to select an option.
Operation with DVD and Video CD DVD Audio Discs DVD-A Viewing another PAGE Since DVD Audio discs DVD Audio is building on the success of DVD to provide high quality, uncompressed, multichannel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself. a new disc format DVD Audio can provide higher quality stereo than Audio sampling rate of up to 192kHz (compared to 44.1kHz for CDs).
with Audio and MP3/WMA Disc Operation Playing an Audio CD and MP3/WMA Disc CD MP3 can play MP3/WMA MPEG1 audio files that have on disc and close the tray. CD; Audio CD menu appears on the TV screen go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 The player compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". can not read extension other than About MP3 file that has a technology.
Operation CD Pause with Audio and MP3/WMA Disc MP3 1 Press PAUSE/STEP WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To 1 press repeat Press SKIP/SCAN . or > Press SKIP/SCAN . twice In previous case MP3 WMA briefly during or step back to sequence. Repeat icon and "A Repeat to of audio CD, to go directly to any track, enter using the numbered buttons (0-9) during playback. " appears again on the menu screen. at your chosen end point.
Operation Viewing with JPEG Disc JPEG disc a Press SKIP/SCAN . This DVD/CD Rceiver play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert 1 a can disc and close the The MP3/WMA-JPEG choice TV to another File Moving JPEG menu appears on the during The DVD/CD Receiver will 2 To return to the slide screen. once or during viewing a previous file. to the Still Picture 1 Press PAUSE/STEP tray.
Programmed Playback CD VCD2.0 with Audio CD Programmed Playback VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program contain 30 tracks. can 1 mode to enter the in the during playback Program Edit mode. or E The mark will appear to the right of the word the right side of the menu screen. on with Video CD ote On a setup Video CD with PBC, you must set PBC to Off on the menu to use the Program function. See page 18.
Additional Information Speaker Setup Adjust the following settings for the built-in 5.1 channel Last Condition surround decoder. DVD Disc Audio R Disc Menu Code Volume Menu Scan player. If you load a disc that tings memorized, the latest stop position is ly recalled. Small Distance Language Progressive switch off the 0dB Size Aspect user settings for the last disc that you have viewed.
Operation Presetting You can tuning, preset make with Radio the radio stations 50 stations for FM and AM sure (MW). Before Preset radio stations in the DVD/CD Receiver's memory (see "Presetting radio stations" on the left). that you have turned down the vol- first the remote control until FM 1 ume. Press BAND 1 AM on appears in the (MW) 2 And then every time you press AM (MW) changes alternately. 3 Press and hold TUNING or window.
Operation RDS with Radio (Continued) Programme Search (PTY) Operation This unit is A which equipped with RDS (Radio Data System), brings a wide range of information to FM radio. casts with Now in use in many countries, RDS is a system for transmitting station call signs or network information, a description of station programme type text message about the station or specifics of musical selection and the correct time.
Other Function Sleep Timer You set the DVD/CD Receiver to turn off automati- can cally at a Setting specified Selecting input time. Press SLEEP to set the desired 1 The SLEEP indicator and play sleep time. setting changes SLEEP 90→80→70→60→50→40→30→20→10→ OFF ote Yo u can check the time remaining before the DVD/CD receiver turns off. Press SLEEP. The remaining time appears in the display window.
Language Code Enter the (See appropriate 17).
Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 19).
Troubleshooting Check the following guide for the possible cause of a before problem contacting Cause Symptom Correction No power. ? The power cord is disconnected. ? The power is on, but the DVD/CD Receiver ? No disc is inserted. ? Plug the power cord wall outlet. Insert a disc. (Check securely that the DVD or, ? The TV is not set to receive DVD signal ? output. Select the on ? The video cable is not connected ? securely. so The connected TV power is turned off.
Troubleshooting (Cont'd) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? ? Connect the antenna Adjust securely. the antennas and connect an external antenna if necessary. ? ? The of the stations is too weak in with automatic signal strength (when tuning tuning). No stations have been preset preset or ?T ? une in the station Preset the stations manually. (page 29).
Specification Power Power Refer to main label Mass Genral External dimensions (W x H x D) conditions CD/ VD AM [MW] x 55 x 350 mm 5°C to 35°C, Laser Semiconductor laser, Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL 625/50, NTSC 525/60 Operation (1 kHz, NOP, LPF/A-Filter) (1 kHz, at 12W position) (20 kHz LPF/A-Filter) (p-p), 75 Ω, negative sync., RCA jack x 2/ SCART (TO TV) 1.
