Owner's Manual

Before
Operation (Continued)
PREPARATION
17
Initial
Setup
You can set
your
own Personal Preferences on the
DVD/CD Receiver.
Initial
Settings
General and
Operation
1
Press SETUP.
The
Setup
menu
appears.
2
Use 3/4 to select the menu
option.
The screen will show the current
setting
for the
selected menu
option,
as well as alternate
setting(s).
3
While the menu
option
is
selected,
press
2,
then
3/4 to select the desired
setting.
4
Press ENTER to confirm
your
selection.
Some menu
option require
additional
steps.
5
Press
SETUP, RETURN,
or PLAY to move the
Setup
menu.
Language
Disc
Language
Select a
language
for the disc's
Menu, Audio,
and
Subtitle.
Original
: The
original language
set for the disc is selected.
Other : To select another
language,
use the number buttons to
enter the
corresponding 4-digit
number
according
to the lan-
guage
code list on
page
32. If
you
enter the
wrong language
code,
press
CLEAR.
Menu
Language
Select a
language
for the
Setup
menu. This is the menu
you
see when
you press
SETUP.
Picture
TV
Aspect
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected.
Displays
theatrical
images
with
masking
bars
above and below the
picture.
4:3 Panscan: Select when a conventional TV set is
connected. The video material formatted in the Pan &
Scan
style
is
played
back in that
style (Both
sides of the
picture
are cut
off).
16:9 Wide: Select when a 16:9 wide TV is connected.
Progressive
Scan
Progressive
Scan Video
provides
the
highest quality
pictures
with less
flickering.
If
you
are
using
the COMPONENT VIDEO OUT
jacks,
but are
connecting
the DVD/CD
player
to a standard
(analog)
television,
set
Progressive
Scan to Off.
If
you
are
using
the
Component
Video
jacks
for
connection to a TV or monitor that is
compatible
with a
progressive
scan
signal,
set
Progressive
Scan to On.
Caution
Once the
setting
for
progressive
scan
output
is
entered,
an
image
will
only
be visible on a
progressive
scan
compatible
TV or monitor. If
you
set
Progressive
Scan
to On in
error,
you
must reset the unit.
1)
Remove
any
disc from the unit and close the disc
tray.
See that "NO DISC" is
displayed
on the
display
window.
2)
Press STOP and hold it for five seconds before
releasing
it. The video
output
will be restored to the
standard
setting
and a
picture
will once
again
be
visible on a conventional
analog
TV or monitor.
DVD-A DVD-V
DVD-A DVD-V
DVD-A DVD-V
Disc Subtitle
Disc Menu
Rating
Country
Code
TV
Aspect
Menu
Language
Disc Audio
English
Spanish
German
Italian
Portuguese
Greek
Disc Subtitle
Disc Menu
Rating
Country
Code
TV
Aspect
Menu
Language
Progressive
Scan
5.1
Speaker Setup
Others
Disc Audio
4:3
4:3
16:9
Letterbox
Panscan
Wide
Disc Subtitle
Disc Menu
Rating
Country
Code
TV
Aspect
Menu
Language
Progressive
Scan
5.1
Speaker Setup
Others
Disc Audio
Original
German
Greek
Portuguese
Chinese
French
English
Spanish
Italian
Other--------
Disc Subtitle
Disc Menu
Rating
Country
Code
TV
Aspect
Menu
Language
Progressive
Scan
5.1
Speaker Setup
Others
Disc Audio
Off
On
Disc Subtitle
Disc Menu
Rating
Country
Code
TV
Aspect
Menu
Language
Progressive
Scan
5.1
Speaker Setup
Others
Disc Audio
Original
German
Greek
Portuguese
Chinese
French
English
Spanish
Italian
Other--------