LH-T753TB JA8CLLA_English DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-T753TB (Main Unit: LH-T753 Speakers: LHS-75TBS, LHS-75TBC, LHS-75TBW) R Before connecting up, operating or repairing product, please read this instruction booklet carefully and completely.
Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric This shock to persons.
Table of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 AudioCDandMP3/WMADisc...............21 Playing an Audio CD and MP3/WMA Disc . . . . . 21 BeforeUse..............................4-5 Pause.............................21 PlayableDiscs...........................4 Precautions.............................5 MovingtoanotherTrack...............21 RepeatTrack/All/Off...................21 NotesonDiscs..........................
Before Use Playable Discs ote on DTS-encoded CDs playing DTS-encoded CDs, excessive audio level may be heard from the analog stereo output. To avoid possible damage to the audio system, turn down the volume before playing back such discs, adjust the volume gradually, and keep the volume level low. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the unit.
Before Use (Continued) Storing Precautions After the unit Handling shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position When the unit away from the TV, VCR, unit after removing the disc.
Front Panel and Rear Panel MIC 1/MIC 2 Connect a MIC 2 to both sockets. or PHONES connector STANDBY/ON microphone to MIC 1 or STANDBY indicator DISC Lights red when the receiver is in Standby mode (off). Tray FUNCTION/PLAY Press and hold down this button about 3 seconds, then press repeatedly to select other function. VOLUME controller DISPLAY Window OPEN/CLOSE button Remote sensor USB host Connect to (USB a MONO/STEREO/ USB port of multimedia memory PAUSE/STEP etc.
Remote Control Overview POWER OPEN/CLOSE Opens DVD Select the output source (CD/DVD) Selects input TV or at a directly or select numbered options in Selects enjoy great sound effect. Marks audio an language (DVD) audio channel (CD). Accesses the Accesses On-Screen Selects the TV's DVD disc. Acknowledges the forward. REVERSE Select programme of TV playback.
Connections TV Connections Make the of the following connections, depending capabilities of your existing equipment. one on Progressive Scan (ColorStream connection If your television is ips Depending your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connection on methods described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.
Connections (Continued) Optional Equipment 1 2 3 4 Connections Connect a VCR to the AV IN connectors. Connect a additional VCR to the AV2 connectors. Connect an of DVD optical output Connect the USB port of a USB Player (or Digital Memory (or MP3 Device etc) player, etc.) Prepa tion to the OPTICAL IN connector. to the USB HOST on the front of the unit.
Connections Assembling the (Continued) and Connecting to Speakers The front and speaker rear stands are detached from the stands. Connect the as Connection Connect the the speakers using supplied speaker cords. speakers assemble the front and Speaker System rear speaker speakers cords and from To obtain the best possible surround sound, adjust speaker parameters (volume, distance, etc.). speaker illustrated.
Connections (Continued) Speaker Positioning In the case of normal position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and subto play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should If you want connect a subwoofer. woofer). ? ? ? Front speakers According to your listening position speakers to 45 degree. set up the speakers for equal distance.
Before Mini Operation for Audio Stream & Glossary Surround mode Sound Mode You DVD VCD2.0 VCD1.1 CD enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark.
Before Operation (Continued) On-Screen Display general playback status on the TV screen. Some items can be changed using the menu. To use the on-screen display: You display can the Example: On-Screen Display during playing DVD Video Selection Method Items Title Number 1/3 b / B, Numbers ENTER Press DISPLAY 1 during playback. Chapter 2Pressv/Vtoselectanitem. The selected item is highlighted.
Before Initial Operation (Continued) LANGUAGE Settings the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu By using item, To see display the menu. SET UP will take you back to initial To go to the next level: The setup Select v / menu V to audio), appears.
Before Operation (Continued) Progressive Scan AUDIO Progressive Scan Video provides pictures with less flickering. the highest quality Each DVD disc has of audio output options. Set the DVD/CD Receiver's AUDIO options according to If you are using the COMPONENT VIDEO OUT jacks, but are connecting the receiver to a standard (analog) 1 Select menu set signal, Progressive Scan "Progressive Scan" on use.
Before LOCK Operation (Continued) Password (Parental Control) You LOCK Rating Unlock Password **** 1 2 Code Country can 3 highlighted. Enter the new 4-digit code, Input it again to verify. 4 Press SET UP to exit the control information certain scenes on that may not be suitable of these discs contain parental scenes Many that applies to the complete the disc.
Before DVD Operation (Continued) OTHERS or Playing Video CD a Operation DVD and Video CD OTHERS Playback Setup PBC On DivX(R) Registration Select Turn on DVD VCD2.0 the TV and select the video VCD1.1 input source con- nected to the DVD/CD Receiver. Audio system: Turn on the audio system and select the input source connected to the Operation DVD/CD Receiver. Select Move PBC Set Press OPEN/CLOSE 1 VCD Playback Control (PBC) On: Video CDs with PBC to On or Off.
DVD Video CD or Operation (Continued) Still Picture and General Features DVD-V ote Unless stated otherwise, all operations described the remote control. Some features may also be available on the Setup use 1 2 Moving DVD-V DVD-A When move disc has to another more than title/group one as title/group, you can 1 follows: Press DISP., then press the appropriate numbered button (0-9) to select a title number. Moving DVD-V When a disc has title VCD2.0 on a more as Press .
DVD or Video CD General Features Repeat To repeat 1 2 A-B a (continued) DVD-A a briefly Press A-B VCD1.1 DVD-V You from can on the TV start points To enter title: Press A-B at your chosen A- appears VCD2.0 Marker Search nine sequence in a playback starting point. screen. on a To cancel the sequence, press A-B. During VCD1.1 1 2 3 during playback. play appears on the The playing at on-screen dis- elapsed playing time of SEARCH.
DVD Video CD or Special Operation (Continued) DVD Features DVD-V DVD-A the contents of DVD Video discs: Menus Checking DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. Then, press the appropriate number button to select an option. Alternatively, use the 1/2/3/4 buttons to highlight your selection, then press ENTER. A typical DVD Audio disc contains up to seven times the data capacity of a CD.
Audio CD Playing Disc an CD MP3/WMA Disc or Operation Audio CD and MP3/WMA MP3 Repeat You WMA can Track/All/Off play a title/chapter/all/track 1 Press REPEAT when The DVD/CD Receiver recordings CD-ROM, CD-R, on MP3/WMA formatted play can or CD-RW discs. 2 Press REPEAT to select Audio CD Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press PLAY or ENTER and playback starts.
JPEG Disc Viewing a Operation JPEG disc JPEG JPEG disc play discs with JPEG files. Before playing JPEG recordings, read the JPEG Recordings on right. This unit Insert disc and close the tray. The JPEG menu appears on the TV 1 notes on ? a is limited player upon the size and number of JPEG files, it could take a long time for the DVD/CD Receiver to read the disc's contents.
Programmed Playback CD MP3 WMA The program function enables you to store your favorite tracks from any disc in the receiver memory. A program contain 300 tracks. 1 Insert disc. a REPEAT PROGRAMMED TRACKS 1. Audio CD and MP3/WMA Discs: Audio CD or MP3/WMA menu appears as 1/12 0:00:00 Audio CD Press REPEAT when below. Press REPEAT to select a disc. The repeat desired repeat mode. JPEG ? Program a 1/104 MP3 List playing icon appears. 2.
DivX Disc Using 1 Operation this DVD/CD Receiver you can play DivX disc. DivX disc disc and close the tray. The DivX appears on the TV screen. Insert a 0:00:00 menu as compatibility with this player is limited follows: ?Available resolution size of the DivX file is under 720x576 1/12 (W x H) pixel.
Speaker Setup Adjust the for the built-in 5.1 channel following settings surround decoder. 1 2 3 4 If you connected speakers to your DVD/CD Receiver, setting the distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the Press SET UP. The setup Use v / menu B to move to Use v / appears. listener at the select the AUDIO V to option then press then press B to is highlighted.
Additional Information Last Condition Memory Controlling DVD This DVD/CD Receiver memorizes the user for settings the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or If you load memorized, the latest stop switch off the player. tings ly recalled. a the TV Your remote control is DVD/CD Receiver as capable well of operating your limited functions of LG TV. as Follow the instructions below to operate for your LG TV.
Operation Presetting You can tuning, with Radio the radio stations preset 50 stations for FM and AM (MW). Before make sure that you have turned down the vol- Preset radio stations in the DVD/CD Receiver's memory first (see "Presetting radio stations" on the left). ume. Press BAND on the remote control until FM or 1 AM 2 And then every time you press BAND, FM and AM (MW) changes alternately.
Other Functions XTS Sleep Timer You set the DVD/CD Receiver to turn off automati- can cally at a Setting specified time. Press SLEEP to set the desired The SLEEP indicator and sleep sleep time appears time. in the dis- play window. Each time you press SLEEP the setting changes in the following order. SLEEP 180 →150 →120→90→80→70 →60→50→ 40→30→20→10 →OFF You (Excellent enjoy the vivid stereophonic sound of the digital original source without any signal distortion.
Language Use this list to Codes your desired language for the Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Check the following guide for the possible cause a before problem contacting No power. ? The power is on, but the DVD/CD Receiver does not work. picture. ? Correction The power cord is disconnected. ? No disc is inserted. ? ? ? The TV is not set to receive DVD signal ? The video cable is not connected ? securely. sound or only a very low-level sound is heard.
Troubleshooting (Cont'd) Cause Symptom Radio stations cannot be tuned in. ? The antenna is Correction positioned or connected poorly. ? ? ? The signal strength of the stations is too weak (when tuning in with automatic Connect the antenna securely. the antennas and connect external antenna if necessary. Adjust ?T une in the station an manually. Refrnce tuning). ? No stations have been preset or preset stations have been cleared (when ? Preset the stations (page 27).
Specifications Power Power Refer to main label supply consumption Refer to main label Mass Gen ral External dimensions CD/ VD (W x H x D) Tuner [MW] 54 x 350 mm Semiconductor laser, Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL 625/50, NTSC 525/60 35°C, Operation to wavelength More than 75 dB (1 kHz, NOP, 32 20 kHz LPF/A-Filter) (1 kHz, at 12W position) (20 kHz LPF/A-Filter) 1.