LH-T7634TF_JA1CLLA_ENG http://www.lg.ca DVD RECEIVER OWNER'S MANUAL MODEL: LH-T7634TF (Main Unit: LH-T7634 Speakers: LHS-76TFS, LHS-76TFC, LHS-76TFW) R USB Before connecting, operating or repairing this product, carefully and read this instruction booklet please completely.
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER'S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE. This has been designed and manufactured to assure personal safety. Improper use can result in electric safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing. This product does not contain any parts that can be repaired by the user.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is CAUTION CAUTION: TO REDUCE THE RISK made.
Introduction Maintenance and Service MaintenanceandService.................4 Beforeuse.............................5 FrontPanel/RearPanel...................6 RemoteControl.........................7 Installation and a chapter before service technician. HANDLING THE UNIT Setup TVConnections.........................8 Optional Equipment Refer to the information in this contacting Connections . . . . . . . . . . .9 When shipping AntennaConnections....................
Introduction Before of Types use Playable Discs DVD To ensure proper use of this product, please read this owner's manual carefully and retain for future (8cm/12cmdisc) reference. Video CD This manual provides information on the (VCD) (8cm/12cmdisc) operation Audio CD and maintenance of your DVD/CD Receiver. Should the unit require service, contact an authorized service location.
Front Panel/Rear Panel PHONES connector STANDBY/ON DISC FUNC./PLAY Tray Press and hold down this button about 3 STANDBY indicator Lights receiver is in mode OPEN/CLOSE button red when the seconds, then press repeatedly to select other function. Standby (off). VOLUME controller DISPLAY Window Remote sensor USB Port Connect to a USB MONO/ST./ port of (USB memory TUNING(-/+)/ SKIP( . bb/BB > ) P./STEP memory device etc.
AUX Selects DVD output To BAND Select the System' s tuner (FM enjoy Marks 0-9 numerical buttons directly select numbered or options in Displays Selects a more b/B/v/V sound effect. Selects VIRTUAL audio an Displays the disc's Title menu VOLUME To . or removes Program menu. MEMO. Enter forward. playback. radio station's frequency into the CLEAR Removes a track number on the program menu or a mark on the MARKER SEARCH menu. ( .
Installation and Setup TV Connections Make the one of the following connections, depending existing equipment. on of your capabilities S-Video connection Connect the S-VIDEO OUT Receiver to the S-VIDEO IN Tips: S-Video cable Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the the (S). Video connection Connect the MONITOR OUT from the DVD/CD connections described below.
Antenna Connections Optional Equipment Connections 1. Connect Connect the VCR to the AV IN connectors. a 2. Connect the USB player, etc.) to supplied FM/AM antenna for listening to the radio. port of USB Memory (or MP3 the USB port on the front of the unit. Connect the AM Loop antenna to the AM antenna connector. Connect the FM Wire antenna to the FM antenna connector.
Assembling and Connecting the Speakers to The speakers are detached from the speaker stands. Connect the speaker cables and assemble the front and rear speakers from speaker stands as illustrated. How to connect the 1. Connect the terminal 2. 3. speaker cables to the appropriate Fix the speaker and the stand by inserting (4 mm) in the speaker hole. Close the holder on the stand. cover of the Open Remove the 2 3. Remove the 4. Remove the 4 cover screws speaker of the in the speaker.
To mount the speaker on Speaker System Connections the wall 1. Connect the SYSTEM to the SYSTEM CONNECTOR For Front or Rear from the stand Speaker : Remove the speaker (Follow steps 1-3 of "To change the stand"). For Center Speaker : Remove the 4 from screws For Front speaker or Rear Speakers :Disconnect the cable from the terminal on For Front or cable to the the 4. 5. For Front 6. or of the For Front of the speakers using the supplied speaker cables.
HDMI Connection HDMI If you have a HDMI TV or monitor, you can connect it to this DVD/CD Receiver using a HDMI cable. 1. Connect the HDMI OUT jack on jack on a Receiver to the HDMI TV or monitor 2. Set the TV's compatible TV HDMI the DVD/CD HDMI compatible (H). H source to HDMI (refer to TV's Owner's manual). 3. In stop mode, select HDMI mode by pressing HDMI. Press RESOLUTION the resolution you wish to to select repeatedly change.
Displaying Disc Information LANGUAGE on-screen You loaded LANGUAGE various information about the disc display can on-screen. Press DISPLAY to show various 1. OSD English Disc Audio Original Disc Subtitle Off Disc Menu Original playback information. The items 2. displayed differ depending playing status. type or You can change Title select an (Track) -- Move by pressing v / V and setting by pressing b / B.
AUDIO 5.1 Each DVD disc has variety of audio output options. AUDIO options according to the Set the receiver's a type of audio system you Press ENTER and 5.1 On Speaker Front L 0ms Sync Size Small Volume 0 dB Distance 0 m Test Move Off Select Select With the DVD* 1 Control (DRC) format, you can hear a program's soundtrack in the most accurate and realistic thanks to audio 3.
LOCK Area Code (Parental Control) Enter the code of the LOCK Rating Unlock Password **** Area Code US whose standards area used to rate the DVD video disc, based on were the list on page 25. Select "Area Code" 1. on the LOCK menu then press B. Follow 2. Move step 2 as shown previous paragraph (Rating). Select Select the first character 3. using Rating Blocks of rated DVDs based playback content. Not all discs are 1.
Operation General features Buttons Z (OPEN X (PAUSE) / CLOSE) Opens (. closes the disc or During playback, Press X SKIP Discs Operations / >) tray. press X to pause repeatedly to playback. play Frame-by-Frame. During playback, press next chapter/track or to current chapter/track. SKIP Press SKIP . twice briefly (. to >) to go to the beginning of the or return to the step back to the previous chapter/track.
Notes general features: on Last Scene If you press SKIP (>) once during Repeat Chapter (Track) playback, the repeat playback This receiver memorizes last that is viewed. The last The A-B on some scene from the last disc remains in memory the disc from the receiver or cancels. Zoom may not work Memory scene even if you remove switch off the receiver. If you load a disc that has the scene memorized, the scene is automatically recalled. DVDs.
Playing This unit an Audio CD Audio CDs play can or or MP3/WMA file MP3/WMA files The program function enables you to store your favorite tracks from any disc in the receiver memory. A recorded media. program MP3/ WMA/ Audio CD Once you insert Audio MP3/WMA files recorded media an or appears on the TV screen. Press v / V to select a track/file then press PLAY or ENTER and playback starts. You can use variable CD, playback Programmed Playback 1. 2.
Viewing a JPEG file JPEG JPEG disc limited with this player is This unit Before JPEG can play discs with JPEG files. playing JPEG recordings, read the Recordings on right. compatibility follows: as Insert 1. disc and close the a The PHOTO menu notes on ? see an on-screen the TV on screen.
Playing DivX Movie file a DivX disc this DVD/CD Receiver you Using play can compatibility with this player is limited follows: as DivX disc. ?A vailable resolution size of the DivX file is under Insert 1. a appears disc and close the on the TV tray. The MOVIE menu 800x600 screen. ? The file (W x name H) pixel. of the DivX subtitle is available by 45 characters.
DVD Audio Discs DVD Audio is success disc format building provide high quality, a new of DVD to Moving multi-channel audio for on Some DVD Audio discs divide content into different the uncompressed, experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on a new groups. Your player enables you to quickly access different groups during playback via the on-screen display. 1. Press DISPLAY 2. Press 3/4 to select the disc itself.
the Radio Stations Presetting You can Before preset 50 stations for FM and AM make tuning, sure Preset radio stations in the DVD/CD Receiver's (MW). that you have turned down the volume. AM (MW) on the Remote Control until FM appears in the or display Press and hold about two seconds until the starts to TUN.
Timer Sleep You can XTS/XTS pro Setting set the DVD/CD Receiver to turn off at automatically specified a The SLEEP indicator and sleep changes in the following The order. When playing the movie with the relatively to the general music, it can check the time remaining before the DVD/CD sense Receiver turns off. Press SLEEP. The remaining Press the DIMMER mute your unit in Connect a stereo headphone PHONES connector. can use VCRs or plug ( 3.
Controlling You can Your TV with the control the sound source, and remote. level, input power switch of your LG TV with the Code numbers of controllable TVs supplied If You can control your TV using Remote Supplied the buttons below. more them than one at code number is one a listed, try entering time until you find the one that works with your TV. TV Control Buttons By pressing You POWER Turn the TV can on or off.
Language Codes Use this list to Disc input your desired language for the following initial settings: Audio, Disc Subtitle, Disc Menu.
Troubleshooting Check the following guide for the possible cause of a before problem contacting Correction Cause Symptom No power. ? The power cord is disconnected. ? The power is on, but the DVD/CD Receiver ? No disc is inserted. ? Plug the power cord wall outlet. securely Insert that the DVD or, is ? picture. a disc. (Check into the audio CD indicator in the DVD does not work. No service. The TV is not set to receive DVD signal ? Select the mode output. display lit.
Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The of the stations is too weak in with automatic signal strength (when tuning tuning). No stations have been preset or preset ?T ? une in the station Preset the stations manually. (page 22). stations have been cleared (when tuning by scanning preset stations).
Specifications Power Genral Refer to main label supply consumption Weight Power Refer to main label Net 3.9 kg 430 x External dimensions (W x H x D) conditions CD/ VD AM [MW] Amplifer mm 5°C to Laser Semiconductor Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input NTSC 525/60 35°C, Operation NOP -6 (1 kHz, (1 kHz, at 1W position) (20 kHz LPF) (p-p), 75 Ω, negative sync., RCA jack x 2 1.
