Owner's Manual

11
Installation and Setup
Displaying
Disc Information
on-screen
You can
display
various information about the disc
loaded on-screen.
1. Press DISPLAY to show various
playback
information.
The items
displayed
differ
depending
on the disc
type
or
playing
status.
2. You can select an item
by pressing
v / V and
change
or select the
setting by pressing
b / B.
Title
(Track)
--
Current title
(or track).
number/total number of titles
(or tracks).
Chapter
--
Current
chapter
number/total number
of
chapters.
Time
--
Elapsed playing
time.
Audio
--
Selected audio
language
or channel.
Subtitle
--
Selected subtitle.
Angle
--
Selected
angle/total
number of
angles.
Sound
--
Selected sound mode.
Note:
If no button is
pressed
for a few
seconds,
the on-
screen
display disappears.
Initial
Settings
By using
the
Setup
menu,
you
can make various
adjustments
to items such as
picture
and sound. You
can also set a
language
for the subtitles and the
Setup
menu,
among
other
things.
For details on each
Setup
menu
item,
see
pages
11 to 14.
To
display
and exit the Menu:
Press SETUP to
display
the menu. A second
press
of
SETUP will take
you
back to initial screen.
To
go
to the next level:
Press B on the remote control.
To
go
back to the
previous
level:
Press b on the remote control.
GENERAL OPERATION
1. Press SETUP. The
Setup
menu
appears.
2. Use v / V to select the desired
option
then
press
B to move to the second level. The screen shows
the current
setting
for the selected
item,
as well as
alternate
setting(s).
3. Use v / V to select the second desired
option
then
press
B to move to the third level.
4. Use v /
V
to select the desired
setting
then
press
ENTER to confirm
your
selection. Some items
require
additional
steps.
5. Press SETUP or PLAY to exit the
Setup
menu.
LANGUAGE
OSD
Select a
language
for the
Setup
menu and on-screen
display.
Disc Audio / Subtitle / Menu
Select the
language you prefer
for the audio track
(disc audio),
subtitles,
and the disc menu.
Original
--
Refers to the
original language
in which
the disc was recorded.
Other
--
To select another
language, press
number
buttons then ENTER to enter the
corresponding
4-
digit
number
according
to the
language
code list
on
page
23. If
you
enter the
wrong language
code,
press
CLEAR.
OSD
Original
English
Off
Original
Disc Audio
Disc Subtitle
Disc Menu
Move Select
LANGUAGE