Owner's Manual

14
4
88
888
Speaker
System
Connection
Connect the
speakers
to the front
(right, left)
or center
speaker
connectors.
Connect the subwoofer to the woofer connector.
Connect the
power
cord of the wireless
speaker
to the
outlet,
then
press
the
power
button on the wireless
speaker.
Connect the
adaptor (DC 7V)
to the outlet and transmitter.
Connect the
ground
cable to the transmitter and rear
(right, left) speaker
connectors.
Set the distance between this unit and wireless
speaker (right, left)
within
10m.
Notes:
Optimum performance
can be
implemented only
when the transmitter and the wireless
speaker
within
distance of
2m
through
10m is used since communication failure
may
occur
if
closely approaching
distance between them.
Be sure to match the
speaker
cable to the
appropriate
terminal on the
components:
+
to
+
and
--
to
--. If
the cables are
reversed,
the sound
will
be distorted and
will
lack base.
If
you
use front
speakers
with
low maximum
input rating, adjust
the volume
carefully
to avoid excessive
output
on the
speakers.
Do not remove the front cover of
supplied speaker.
It
takes about five seconds
(and may
take
longer)
for the transmitter and wireless
speaker (left, right)
to
communicate
with
each other.
When the unit is turned
off,
the transmitter is also turned off
automatically
after about
twenty
seconds.
If
either wireless
speaker (left. right)
is turned
off,
the wireless
speaker
will
not function.
Transmitter
Wireless
Speaker
(Right)
Wireless
Speaker
(Left)