LGESL_LH-W753TA_ENG_102V WIRELESS DVD RECEIVER SYSTEM OWNER'S MANUAL MODEL: LH-W753TA LH-W753, LHS-W75TAF, LHS-W75TAC, LHS-W75TAR, LHS-W75TAL, LHS-W75TAW, ACC75T R Before connecting up, operating or repairing product, please read this instruction booklet carefully and completely.
Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within an user about the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient to constitute magnitude a risk of electric shock to persons.
Table of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 AudioCDandMP3/WMADisc...............23 Playing an Audio CD and MP3/WMA Disc . . . . . 23 BeforeUse..............................4-5 Pause.............................23 PlayableDiscs...........................4 Precautions.............................5 MovingtoanotherTrack...............23 RepeatTrack/All/Off...................23 NotesonDiscs..........................
Before Use Playable Discs ote When (8cm/12cmdisc) DVD audio discs gradually, and keep the volume level low. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the unit.
Before Use (Continued) After the unit Handling When shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position the unit away from the TV, VCR, unit after removing the disc.
Front Panel and Rear Panel Connect a MIC 2 to both sockets. or PHONES connector STANDBY/ON MIC 1/MIC 2 microphone to MIC 1 or STANDBY indicator DISC Lights red when the receiver is in Standby mode (off). Tray FUNCTION/PLAY Press and hold down this button about 3 seconds, then press repeatedly to select other function.
Remote Control Overview POWER OPEN/CLOSE Opens DVD Select the output source (CD/DVD) or Selects DVD System's (FM SLEEP and AM 0-9 numerical buttons directly or options in at AUDIO SOUND MRAKER - SEARCH an an PRESET/ Marks CH language (DVD) audio channel (CD). or menu Accesses On-Screen Selects the TV's b/B/v/V - . Selects DVD disc. menu on a or REVERSE forward. playback. Displays the disc's Title VOLUME To Starts D.
Connections TV Connections Make the of the following connections, depending capabilities of your existing equipment. one on Progressive Scan (ColorStream connection If your television is ips Depending your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connection on methods described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.
Connections (Continued) Optional Equipment Connections 1 2 3 4 Connect a VCR to the AV IN connectors. Connect a additional VCR to the AV2 connectors. Connect an optical output Connect the USB port of of DVD a USB Player (or Digital Memory (or MP3 Device etc) player, etc.) Prepa tion to the OPTICAL IN connector. to the USB HOST on the front of the unit.
Connections (Continued) Aerial Connections Connect the Connect supplied FM/AM aerial for listening to the radio. the AM Loop aerial to the AM aerial connector. Connect the FM Wire aerial to the FM aerial connector. AM FM Wire aerial Loop aerial (supplied) (supplied) L AUDIO R AV2 IN AV1 IN otes To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components. Be sure After 10 fully extend the FM wire aerial.
Connections (Continued) Speaker System Assembling and Connecting the Speakers Connection ote If there is a strong electromagnetic wave The front and product speaker interference may be occurred. nearby, an (Ex : Micro speakers are detached from the stands. Connect the ble the front and oven) wave rear to rear speaker cords and assemspeakers from speaker stands as illustrated. Transmitter Connect the LED indicator Displays the operated status.
Connections (Continued) Speaker System Connection Speaker Connections Connect the speakers to the front (right, left) or center speaker connectors. Connect the subwoofer to the woofer connector. Connect the power cord of the wireless speaker to the outlet. Connect the DC IN connector of transmitter and the transmitter connector of Connect the SOUND SIGNAL connector of transmitter and the rear panel with the DC power cable.
Connections (Continued) Speaker Positioning In the of normal case position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and subto play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should If you want connect a subwoofer. woofer). ? ? Front speakers According to your listening position speakers to 45 degree. for speakers equal distance.
Before Mini Operation Glossary for Audio Stream & Surround mode Sound Mode You DVD VCD2.0 VCD1.1 CD enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high audio from DTS program sources such as DVD and compact discs, etc.bearing the trade- quality digital discs, mark.
Before Operation (Continued) On-Screen You Display general playback status on the TV screen. Some items can be changed using the menu. To use the on-screen display: display can the Example: On-Screen Display during playing DVD Video Selection Method Items Title Number 1/3 b / B,Numbers ENTER Press DISPLAY during playback. 1 2Pressv/Vtoselectanitem. highlighted.
Before Initial Operation (Continued) LANGUAGE Settings the menu, you can make various adjustments to items such as picture and sound. You can also By using Setup LANGUAGE language for the subtitles and the Setup menu, among other things. For details on each Setup menu set a item, To see display the menu. SET UP will take you back to initial To go to the next level: v / 4 5 Select menu V to screen v v audio), appears.
Before Operation (Continued) Progressive Scan AUDIO Progressive Scan Video provides pictures with less flickering. the highest quality Each DVD disc has set Progressive Select 1 menu scan set signal, the type of audio system you Scan to Off. Progressive "Progressive Scan" of audio on output options. options according to use.
Before LOCK Operation (Continued) Password (Parental Control) You LOCK Unlock Rating **** Password 2 Follow control information certain scenes on to that may not be suitable of these discs contain parental scenes Many that applies to the complete the disc. Movies and disc scenes are or rated control feature allows you to block access below the rating you input, thereby preventing your children from being able to view material you believe is unsuitable.
Before DVD Operation (Continued) OTHERS or Playing Video CD a Operation DVD and Video CD OTHERS Playback Setup PBC On DivX(R) Registration Select Turn on DVD VCD2.0 the TV and select the video VCD1.1 input source con- nected to the DVD/CD Receiver. Audio system: Turn and select the on input the audio source Operation system connected to the DVD/CD Receiver. Select Move PBC Set 1 VCD Playback Control to On (PBC) On: Video CDs with PBC or Off.
DVD Video CD or Operation (Continued) Still Picture and General Features DVD-V ote Unless stated otherwise, all operations described use move a to another TITLE/GROUP disc has to another DVD-V title/group, one title/group as you can follows: DISP., then press the appropriate numbered button (0-9) Moving DVD-V to select title disc has a VCD2.0 on a more as Press . or VCD1.1 one more track, you chapter can move Then, press 3/4 to select the chapter/track icon.
DVD Video CD or General Features Repeat To repeat 1 2 A-B (continued) DVD-A a briefly Press A-B VCD1.1 DVD-V You from on again A-B appears briefly begins. the TV starting point. 1 screen. at your chosen end on start can points To enter title: Press A-B at your chosen A- appears VCD2.0 Marker Search nine sequence in a sequence 3 DVD-V Operation (Continued) the TV screen, and the a playback VCD2.0 2 VCD1.1 1 Press DISP. during playback.
DVD Video CD or Operation (Continued) DVD Features Special DVD-V A typical DVD Audio disc contains up to seven data capacity of a CD. This additional space is DVD-A the contents of DVD Video discs: Menus DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. option. Alternatively, use light your selection, then to select the 1/2/3/4 buttons to an quality that is closer to the artist's master recording or for longer recordings.
Audio CD Playing Disc an MP3/WMA Disc or Audio CD and MP3/WMA MP3 CD Operation Repeat You WMA can play recordings on MP3/WMA formatted play can CD-ROM, CD-R, or CD-RW discs. 2 Press REPEAT to select ? Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press ? ENTER and playback a disc. on a disc. The repeat icon ? desired a repeat mode. TRACK: repeats the current track ALL: repeats all the tracks on a disc.
JPEG Disc Viewing This unit a Operation JPEG disc JPEG JPEG disc as play discs with JPEG files. Before playing JPEG recordings, read the JPEG Recordings on right. 1 can Insert disc and close the tray. The JPEG menu appears on the TV notes on ? a screen. with this is limited player follows: upon the size and number of JPEG files, it could take a long time for the DVD/CD Receiver to read the disc's contents.
Programmed Playback MP3 CD WMA The program function enables you to store your favorite tracks from any disc in the receiver memory. A program contain 300 tracks. 1 Insert disc. a REPEAT PROGRAMMED TRACKS 1. Audio CD and MP3/WMA Discs: Audio CD or MP3/WMA menu appears as 1/12 0:00:00 Audio CD Press REPEAT when below. Press REPEAT to select disc. The repeat a desired repeat mode. JPEG ? Program a 1/104 MP3 List playing icon appears. 2.
DivX Disc Using this DVD/CD Receiver you Insert 1 Operation a appears disc and close the on the TV can play DivX disc. DivX disc tray. The DivX menu as compatibility with this player is limited follows: screen. ?A vailable resolution size of the DivX file is under 0:00:00 720x576 1/12 (W x H) pixel.
Speaker Setup Adjust the for the built-in 5.1 channel following settings surround decoder. 1 If you connected speakers to your DVD/CD Receiver, setting the distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the Press SET UP. The 2 Use 3 Use setup v menu v appears. listener at the / V to select the AUDIO B to move to Distance option then press then press B to is highlighted.
Additional Information Last Condition Memory Controlling DVD This DVD/CD Receiver memorizes the user for settings the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the If you load the latest stop player. tings memorized, ly recalled. a the TV Your remote control is DVD/CD Receiver as capable well of operating your limited functions of LG TV. as Follow the instructions below to operate for your LG TV.
Operation Presetting You can the radio stations 50 stations for FM and AM preset make tuning, with Radio sure Before (MW). that you have turned down the vol- Preset radio stations in the DVD/CD Receiver's memory first (see "Presetting radio stations" on the left). ume. Press BAND 1 AM 2 3 on the remote control until FM in the (MW) appears display or 2 until the 3 then release. when the DVD/CD Receiver tunes in station.
Other Functions XTS Sleep Timer You set the DVD/CD Receiver to turn off automati- can cally 1 at a specified time. Press SLEEP to set the desired The SLEEP indicator and sleep sleep time. time appears in the dis- window. play 2 Setting Each time you press SLEEP the setting changes in the following order. SLEEP 180 →150 →120→90→80→70 →60→50→ 40→30→20→10 →OFF ote You can check the time remaining before the DVD/CD receiver turns off. Press SLEEP.
Language Codes Use this list to your desired language for the Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Check the following guide for the possible of cause a before problem contacting service. Cause Symptom Correction No power. ? The power cord is disconnected. ? the power cord wall outlet. The power is on, but the DVD/CD Receiver ? No disc is inserted. ? Insert does not work. No Plug (Check lit.) picture. ? The TV is not set to receive DVD signal ? output.
Troubleshooting (Cont'd) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The signal strength weak (when tuning tuning). of the stations is too ?T une in the station in with automatic No stations have been preset or preset manually.
Specifications Power Power External dimensions CD/ VD [MW] H x D) 430 x x 350 Semiconductor Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL output output Video mm 5°C to output Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency laser, wavelength More than 75 dB (1 kHz, NOP, (1 kHz, at 12W position) (20 kHz LPF/A-Filter) 1.
P/N: 3834RH0102V
