Owner's Manual

4 Using External device
Using External device 11
Using External device
4
USB MP3 Playback
USB Storage Device
1. Insert the USB storage device to the USB port on the unit.
2. Select the USB function by pressing F on the unit or F on the remote control. When you select USB function,
the USB storage device will be played automatically.
3. Select a file you want to play by pressing Y/U on the unit or C/V on the remote control.
,
MP3 Playback Requirement
y
Bitrate : 32 kbps - 448 kbps
y
Sampling Frequency : 8 KHz - 48 KHz
Removing the USB Device from the unit :
1. Choose a different function or press Z on the remote control.
2. Remove the USB device from the unit.
To Do this
Stop
Press Z on the remote control.
Playback
Press T on the unit or d/M on the remote control.
Skipping to the next/previous
file
Press Y/U on the unit or C/V on the remote control to skip
the file in stop state.
During playback, press U on the unit or V on the remote control to go
to the next file.
Playing less than 3 seconds, press Y on the unit or C on the remote
control to go to the previous file.
Playing after 3 seconds, press Y on the unit or C on the remote
control to go to the beginning of the file.
Pause
During playback, press T on the unit or d/M on the remote control.
Playing repeatedly or randomly
Press REPEAT on the remote control repeatedly, the display changes in the
following order.
ONE
h /
ALL
h /
SHUFFLE
G /
OFF
,
Note
y
If you use an USB extension cable or USB hub, the USB device is not recognized.
y
Some USB device may not work with this unit.
y
During random playback, a same le that was being played may be played again.
y
You can play only MP3 le.
LH64B_LH62B_LH64G_LH62G.AINDLLK_ENG.indd 11 2016-06-30 �� 4:05:21