OWNER’S MANUAL 3D Blu-ray™ / DVD Home Cinema System Please read this manual carefully before operating your set and retain it for future reference.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. Disposal of your old appliance 1. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 2. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 3.
Getting Started Declaration of Conformity 1 Getting Started Hereby, LG Electronics European Shared Service Center B.V., declares that this 3D BLU-RAY WIRELESS HOME CINEMA is compliant with the essential requirements and other relevant provisions of Directive 1999/5/EC. The complete Declaration of Conformity may be requested through the following postal address: LG Electronics European Shared Service Center B.V.
Getting Started 5 Important Notice for TV colour system The colour system of this player differs according to currently playing discs. Only the multi system colour TV can receive all signals output from the player. yy If you have a PAL colour system TV, you will see just distorted images when using discs or video contents recorded in NTSC. yy The multi system colour TV changes the colour system automatically according to input signals.
Table of Contents Table of Contents 1 Getting Started 2 8 8 9 9 9 10 11 11 Safety Information Introduction – Playable discs and symbols used in this manual – About the “7” symbol display – Regional code – System Select Remote Control Front Panel Rear Panel 2 Connecting 12 13 13 13 Positioning the system Speaker Connection – Attaching the speakers to the player – Attaching the rear speakers to the wireless receiver Wireless speakers connection – Setting up the wireless receiver for the first time
Table of Contents 48 49 49 50 50 50 51 51 52 52 52 52 53 53 53 53 53 53 53 54 55 56 56 57 – Changing the TV Aspect Ratio – Changing subtitle Code Page – Changing the Picture Mode – Viewing content information – Changing content list view – Selecting a subtitle file – Listening to music during slide show – Playing file encoded in 3D Advanced Features – Enjoying BD-Live™ – LG AV Remote – Private Sound Mode Radio Operations – Listening to the radio – Presetting the Radio Stations – Deleting a saved station –
Getting Started Introduction 1 Playable discs and symbols used in this manual Getting Started Media/Term Logo Symbol e Description yy Discs such as movies that can be purchased or rented. yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs. yy BD-R/RE discs that are recorded in BDAV format. Blu-ray y u i r DVD-ROM yy BD-R/RE discs that contain Movie, Music or Photo files. yy ISO 9660+JOLIET, UDF and UDF Bridge format yy Discs such as movies that can be purchased or rented.
Getting Started ,,Note yy Depending on the recording software & the finalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable. yy BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.
Getting Started Remote Control 1 • • • • • • a • • • • • • Getting Started 1 (POWER): Switches the player ON or OFF. B (OPEN/CLOSE): Opens and closes the disc tray. FUNCTION: Changes input mode. 0-9 numerical buttons: Selects numbered options in a menu. CLEAR: Removes a number when setting the password or network connection. ENTER (b): Acknowledges menu selection. BACK ( ): Exits the menu or returns to the previous screen.
Getting Started 11 Front Panel a b c a Disc Tray f f Operation buttons R (OPEN/CLOSE) T (PLAY / PAUSE) I (STOP) F (Function) Changes the input source or function.
C G Connecting 12 F A D 2 A A Positioning the system E A The following illustration shows an example of positioning the system. Note that the illustrations Ain these instructions differ from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (A). A B C D E F G Connecting B C A A A GB B A yy Before using the subwoofer, remove the protective vinyl.
Connecting Speaker Connection Attaching the speakers to the player 1. Connect speaker wires to the player. Each speaker wire is color-coded. Use matching color wires for corresponding speakers. Connect a woofer cord to the player. When connecting a woofer cord to the player, insert the connector until it clicks. Color Speaker Position Green Center Center Orange Sub woofer Any front position Red Front Front right White Front Front left 2.
Connecting Wireless speakers connection 2 ,,Note yy If there is a strong electromagnetic wave product nearby, interference may occur. Put the unit (wireless receiver and main unit) away from there. Setting up the wireless receiver for the first time yy It takes a few seconds (and may take longer) for the main unit and the wireless receiver to communicate with each other. 1. Connect the power cord of the wireless receiver to the outlet.
Connecting Connecting to your TV If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Speed HDMI™ Cable). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor. 15 Additional information for HDMI yy When you connect a HDMI or DVI compatible device make sure of the following: -- Try switching off the HDMI/DVI device and this player.
Connecting What is SIMPLINK? Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection. 2 Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc. Connecting Refer to the TV owner’s manual for the details of SIMPLINK function. LG TV’s with SIMPLINK function has the logo as shown above. Resolution setting The player provides several output resolutions for HDMI OUT jack.
Connecting ,,Note yy If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows: 1. Press B to open the disc tray. 17 Antenna connection Connect the supplied antenna for listening to the radio. 2. Press Z (STOP) for more than 5 seconds. yy If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].
Connecting Connections with external device AUX Connection You can enjoy the sound from an external component through the speakers of this system. 2 Connecting Connect the analog audio output jacks of your component into the AUX L/R (INPUT) on this unit. And then select the [AUX] option by pressing FUNCTION. You can also use the F (Function) button on the front panel to select the input mode.
Connecting 19 HDMI IN 1/2 connection You can enjoy the pictures and sound from your component through this connection. Connect the HDMI OUT jack of your component into the HDMI IN 1 or 2 jack on this unit. And then select the [HDMI IN 1/2] option by pressing FUNCTION. You can also use the F (Function) button on the front panel to select the input mode. To the HDMI OUT jack of your component (set-top box, digital satellite receiver, video game machine, etc.
Connecting Connecting to your Home Network 2 Connecting This player can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module. By connecting the unit to a broadband home network, you have access to services such as software updates, BD-Live interactivity and online content services.
Connecting Wired network setup Advanced Setting If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow. If you want to set the network settings manually, use W/S to select [Advanced Setting] on the [Network Setting] menu and press ENTER (b). 21 1.
Connecting Wireless network connection Another connection option is to use an Access Point or a wireless router. The network configuration and connection method may vary depending on the equipment in use and the network environment. Preparation Before setting the wireless network, you need to: -- connect the broadband internet to the wireless home network. -- set the access point or wireless router. -- note the SSID and security code of the network. 2 Connecting 1.
Connecting 23 Advanced Setting If you want to set the network settings manually, use W/S to select [Advanced Setting] on the [Network Setting] menu and press ENTER (b). 1. Use W/S to select [Wireless] and press ENTER (b). ,,Note yy WEP security mode generally have 4 keys available on an access point setting. If your access point or wireless router use WEP security, enter the security code of the key “No.1” to connect on your home network. 4.
Connecting Notes on network connection yy Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/ or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.
System Setting 25 Initial Setup When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language and network settings on the initial setup wizard. 5. Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. 1. Press 1 (POWER). The initial setup wizard appears on the screen. 2. Use W/S/A/D to select a display language and press ENTER (b). 6.
System Setting 9. You can listen to TV sound through this unit’s speaker automatically when TV is turned on. Settings Adjust the setup settings You can change the settings of the player in the [Settings] menu. 1. Press HOME ( ). Press W to move and press A/D to select [On] or [Off ]. Select [Next] and press ENTER (b). 10. Check all the settings that you have set in the previous steps. 3 System Setting 2. Use A/D to select the [Settings] and press ENTER (b). The [Settings] menu appears.
System Setting 27 [NETWORK] menu Smart Service Setting The [NETWORK] settings are needed to use the software update, BD-Live and online content services. [Country Setting] Connection Setting [Initialize] If your home network environment is ready to connect the player, the player needs to be set the wired or wireless network connection for network communication. (See “Connecting to your Home Network” on page 20.) Depending on the region, [Initialize] function may not be available.
System Setting [DISPLAY] menu Resolution TV Aspect Ratio Sets the output resolution of the HDMI video signal. Refer to page 16 for details about the resolution setting. Select a TV aspect ratio option according to your TV type. 3 [Auto] Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture.
System Setting 29 HDMI Color Setting [LANGUAGE] menu Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. Display Menu [YCbCr] Select when connecting to a HDMI display device. [RGB] Select when connecting to a DVI display device. 3D Mode Disc Menu / Disc Audio / Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu.
System Setting [AUDIO] menu DRC (Dynamic Range Control) Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use. This function allows you to listen to a movie at a lower volume without losing clarity of sound. ,,Note Since many factors affect the type of audio output, see “Audio Output Specifications” on page 68 for details.
System Setting 31 Speaker Setup To obtain the best possible sound, use the speaker setup display to specify the volume of the speakers you have connected and their distance from your listening position. Use the test to adjust the volume of the speakers to the same level. Select a speaker that you want to adjust. [Volume] Adjust the output level of each speaker. [Distance] Adjust the distance between each speaker and the listening position. [Test/ Stop test tone] The speakers will emit a test tone.
System Setting [LOCK] menu DVD Rating The [LOCK] settings affect only Blu-ray Disc and DVD playback. Blocks playback of rated DVD based on their content. (Not all discs are rated.) To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created. If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password twice, and press ENTER (b) to create a new password. Password You can create or change the password.
System Setting 33 [OTHERS] menu TV Sound Connecting Quick Start You can listen to TV sound through this unit’s speaker automatically when TV is turned on. This player can stay in standby mode with low power consumption, so that the player can instantly boot without delay when you turn on this unit. Set this option to [On] for activating [Quick Start] function. ,,Note yy When [Quick Start] is set to [On], power consumption will be higher than when [Quick Start] is set to [Off ].
System Setting Software [Information] Displays the current software version. [OSS Notice] LGE Open Source Software Notice is displayed. [Update] You can update the software by connecting the unit directly to the software update server (page 63). SIMPLINK / ARC 3 -- The SIMPLINK function allows you to control this unit with LG TV’s remote control. System Setting -- The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of this player.
Operating 35 Sound Effect You can select a suitable sound mode. Press SOUND EFFECT repeatedly until the desired mode appears on the front panel display or the TV screen. The displayed items for the equalizer maybe different depending on sound sources and effects. Setting the [User EQ] You can adjust the sound by raising or lowering the level of specific frequency. Press USER EQ. [Standard]: You can enjoy optimized sound. [Music]: You can enjoy comfortable and natural sound.
Operating Home Menu Display Playing the Linked Devices Using [HOME] menu The home menu appears when you press HOME ( ). Use W/S/A/D to select a category and press ENTER (b). Playing a disc erot 1. Press B (OPEN/CLOSE), and place a disc on the disc tray. 2. Press B (OPEN/CLOSE) to close the disc tray. For the most Audio CD, BD-ROM and DVD-ROM discs, playback starts automatically. 3. Press HOME ( ). 4. Select [Movie] or [Music], and select disc icon. a [Movie] - Plays video content.
Operating 37 Playing Blu-ray 3D disc e This player can play the Blu-ray 3D disc which contains separate views for the left and right eyes. Preparation In order to playback Blu-ray 3D title in stereoscopic 3D mode, you need to: Playing a file on disc/USB device yui This player can play video, audio and photo files contained in the disc or USB device. 1. Insert a data disc on the tray or connect an USB device. yy Check your TV is 3D capable and has HDMI input(s).
Operating Notes on USB device yy This player supports USB flash drive/external HDD formatted in FAT32 and NTFS when accessing files (music, photo, movie). However, for BD-Live, use the USB flash drive / external HDD formatted in FAT32. yy This unit can support up to 4 partitions of the USB device. yy Do not extract the USB device during operation (play, etc.). yy An USB device which requires additional program installation when you have connected it to a computer, is not supported.
Operating 39 Playing a file on Android device yui Notes on Connecting Android device This player can play video, audio and photo files contained in the Android device. yy Do not extract the Android device during operation (play, etc.). 1. Connect the Android device to the unit with USB cable. Make sure that MTP is activated on Android device. yy Video, audio and photo files can be played. For details of playing each file, refer to relevant pages.
Operating Playing a file on a network server yui This player can play video, audio and photo files located in a DLNA-compatible digital media server through your home network. 1. Check the network connection and settings (page 20). 2. Press HOME ( ). 3. Select [Movie], [Photo] or [Music] using A/D, and press S. ,,Note yy The file requirements are described on page 65. yy The thumbnail of the unplayable files can be displayed, but those cannot be played on this player.
Operating Using Home Network Server for PC Before connecting to PC to play a file, SmartShare PC software should be installed on your PC. About SmartShare PC Software SmartShare PC Software is for sharing video, audio and photo files stored on your computer to this unit as a digital media server. Downloading SmartShare PC Software ,,Note 1. Start up your computer, visit http://www.lg.com. If necessary, select your region. 2. Click support tab. 3.
Operating System requirements Minimum System yy CPU : Intel® 2.0 GHz or AMD Sempron™ 2000+ processors yy Memory : 1 GB of free RAM yy Graphics card : 64 MB video memory, minimum resolution of 1024 x 768 pixels, and 16 bit color settings yy Free Disk Space : 200 MB yy Windows® XP (Service Pack 2 or higher), Windows Vista®, Windows® 7 or higher yy Windows® Media Player® 11.0 or higher yy Network environment: 100 Mb Ethernet, WLAN Recommended System 4 yy CPU : Intel® Core™ Duo or AMD Athlon™ 64X2, 1.
Operating 43 General Playback Basic operations for photo content Basic operations for video and audio content To play a slide show To stop playback To stop a slide show Press Z (STOP) during playback. To pause playback Press M (PAUSE) during playback. Press d (PLAY) to resume playback. To play frame-by-frame (Video) Press M (PAUSE) during video playback. Press M (PAUSE) repeatedly to play Frame-by-Frame playback.
Operating Resume playback eroyt u The unit records the point where you pressed the Z (STOP) depending on the disc. If “MZ (Resume Stop)” appears on the screen briefly, press d (PLAY) to resume playback (from the scene point). If you press Z (STOP) twice or unload the disc, “Z(Complete Stop)” appears on the screen. The unit will clear the stopped point. ,,Note yy The resume point may be cleared when a button is pressed (for example; 1 (POWER), B (OPEN/CLOSE), etc).
Operating 45 On-Screen Display Displaying content information onscreen You can display and adjust various information and settings about the content. eroy To control video playback eroy 2. Select an [Option] using A/D, and press ENTER (b). 1. During playback, press INFO/MENU (m). You can control playback and set options while watching videos. During playback, press INFO/MENU (m). 4 a Title – Current title number/total number of titles b [Disc Menu] - Accesses menu on a disc.
Operating ,,Note yy If no button is pressed for a few seconds, the on-screen display disappears. yy A title number cannot be selected on some discs. yy Available items may differ depending on discs or titles. Setting the slide show option You can use various options during viewing a photo in full screen. 1. While viewing pictures, press INFO/MENU (m). 2.
Operating 47 Advanced Playback Repeating a specific portion eroy Repeat playback erotu y This player can repeat a portion you have selected. Blu-ray Disc / DVD / Video files During playback, press REPEAT (h) to select a desired repeat mode. A-B – Selected portion will be repeated continually. Chapter – The current chapter will be played back repeatedly. (BD / DVD only) Title – The current title will be played back repeatedly. All – All the titles or files will be played back repeatedly.
Operating Selecting a subtitle language eroy 1. During playback, press INFO/MENU (m). 2. Select an [Option] using A/D, and press ENTER (b) 3. Use W/S to select the [Subtitle] option. 4. Use A/D to select desired subtitle language. By pressing ENTER (b), you can set various subtitle options. 5. Press BACK (1) to exit the On-Screen display. ,,Note yy Some discs allow you to change subtitle selections only via the disc menu.
Operating 49 ,,Note Even if you change the value of the [TV Aspect Ratio] option in On-Screen display, the [TV Aspect Ratio] option in the [Settings] menu is not changed. Changing the Picture Mode eroy You can change the [Picture mode] option during playback. 1. During playback, press INFO/MENU (m). Changing subtitle Code Page y 2. Select an [Option] using A/D, and press ENTER (b) If the subtitle is displayed in broken letter, you can change the subtitle code page to view the subtitle file properly.
Operating Viewing content information y Selecting a subtitle file y The player can display the content information. If the subtitle file name is different from the video file name, you need to select the subtitle file on the [Movie] menu before playing the movie. 1. Select a file using W/S/A/D. 2. Press INFO/MENU (m). The file information appears on the screen. During video playback, you can display the file information by pressing TITLE/POPUP. 1.
Operating Listening to music during slide show i You can display photo files while listening to audio files. 1. While viewing a photo in full screen, press INFO/ MENU (m) to display the option menu. 2. Select an [Option] using A/D, and press ENTER (b). 3. Use W/S to select [Music Select] option, and press ENTER (b) to display the [Music Select] menu. 4. Use W/S to select a device, and press ENTER (b).
Operating Advanced Features Enjoying BD-Live™ e BD-ROM supporting BD-Live that has a network extension function allows you to enjoy more functions such as downloading new movie trailers by connecting this unit to the internet. 1. Check the network connection and settings (page 20). 2. Insert an USB storage device to the USB port on the front panel. An USB storage device is needed to download bonus content. 4 3. Press HOME ( ), and set the [BD-LIVE connection] option on the [Settings] menu (page 27).
Operating 53 Radio Operations Be sure that the antenna is connected. (Refer to the page 17) Listening to the radio 1. Press FUNCTION until TUNER (FM) appears in the display window. The last received station is tuned in. Deleting a saved station 1. Press PRESET (- / +) to select a preset number you want to delete. 2. Press CLEAR, the preset number will blink in the display window. 3. Press CLEAR again, to delete the selected preset number. Deleting all the saved stations 2.
Operating Using the Premium You can use various content services via Internet with the Premium feature. 1. Check the network connection and settings (page 20). 2. Press HOME ( ). 3. Select the [Premium] using A/D, and press ENTER (b). 4. Select an online service using W/S/A/D, and press ENTER (b). 4 ,,Note Operating yy For detailed information of each service, contact the content provider or visit support link of the service.
Operating 55 Enjoying with LG Multi-room Audio (LG Music Flow) ,,Note yy If you use this unit with MUSIC flow, at least one unit should be connected by LAN cable. For more detail for use with MUSIC flow, refer to the MUSIC flow’s user manual. tu yy It is recommended to connect up to 4 speakers for smooth playback. LG smart Hi-Fi audio system MUSIC flow allows you to enjoy music with several speakers wirelessly. yy Signal interference may cause the playback to stop.
Operating Using BLUETOOTH® wireless technology About BLUETOOTH Bluetooth is wireless communication technology for short range connection. (The sound may be interrupted when the connection interfered by the other electronic wave or you connect the Bluetooth in the other rooms.) Connecting individual devices under Bluetooth wireless technology does not incur any charges.
Operating 57 ,,Note yy The sound may be interrupted when the connection interfered by the other electronic wave. yy You cannot control the Bluetooth device with this unit. yy Pairing is limited to one Bluetooth device per unit and multi-pairing is not supported. yy If there are obstacles between your Bluetooth device and the set, your Bluetooth device cannot be connected. yy Depending on the type of the device, you may not be able to use the Bluetooth function.
Operating 1. Turn on the unit by pressing 1 (Power) on the remote control. 2. Select LG TV function by using FUNCTION on the remote control or F on the unit until the function is selected. 3. Set up the sound output of TV to listen to the sound through this unit : TV setting menu [ [Sound] [ [TV Sound output] [ [LG Sound Sync (Wireless)] “PAIRED” appears on the display window for about 3 seconds and then you can see “LG TV” on the display window if connecting normally between this unit and your TV.
Troubleshooting 59 Troubleshooting General Symptom Cause & Solution The unit does not work properly. yy Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again. yy Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. The Power does not turned on. yy Plug the power cord into the wall outlet securely. The unit does not start playback.
Troubleshooting Network Symptom Cause & Solution BD-Live feature does not work. yy The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. yy Ensure that the unit is correctly connected to the local area network and can access the internet (page 20). yy Your broadband speed may not fast enough to use the BD-Live features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended.
Troubleshooting 61 Picture Symptom Cause & Solution There is no picture. yy Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. yy Connect the video connection securely. yy Check the [HDMI Color Setting] in the [Settings] menu is set to the appropriate item that conforms to your video connection. yy Your TV may not support the resolution you have set on the player. Change the resolution that your TV accepts.
Appendix Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. By pressing You can 1 (TV POWER) Turn the TV on or off. AV/INPUT Switch the TV’s input source between the TV and other input sources. PR/CH W/S Scan up or down through memorized channels. VOL +/– Adjust the volume of the TV ,,Note 6 Appendix Depending on the unit being connected, you may not be able to control your TV using some of the buttons.
Appendix 63 Network Software Update Network update notification From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows. Option 1: 1. The update menu will appear on the screen when you turn on the player. 2.
Appendix 4. If newer version exists, the message “A new update was found. The update takes a few minutes. Do you want to update?” appears. 5. Select [OK] to start update. (Selecting [Cancel] will end the update.) 6. The player starts downloading the newest update from the server. (Downloading will takes several minutes depending on your home network condition) 7. To update software the next time, the software update procedure has to be started from the beginning again.
Appendix 65 Additional Information File requirement Video files File Location Disc, USB DLNA File Extension Audio Format Codec Format Subtitle “.avi”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.asf”, “.wmv”, “.m4v” (DRM free), “.vob”, “.3gp”, “.mov”, “.trp”, “.m2t”, “.mpe”, “.m1v”, “.m2v”, “.wm”, ”.flv”, “.ts”, “.dat” XVID, MPEG1 SS, H.264/ MPEG-4 AVC, MPEG2 PS, MPEG2 TS, VC-1 SM (WMV3) Dolby Digital, DTS, MP3, WMA, AAC, AC3 SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.
Appendix ,,Note yy The file name is limited to 180 characters. yy Maximum files/Folder: Less than 2000 (total number of files and folders) yy Depending on the size and number of the files, it may take several minutes to read the content on the media. yy This player supports UTF-8 files even it contains Unicode subtitle content. This player can not support the pure Unicode subtitle files. yy File compatibility may differ depending on the server.
Appendix 67 About DLNA Compatibility notes This Player is a DLNA Certified digital media player that can display and play video, photo and audio content from your DLNA-compatible digital media server (PC and Consumer Electronics). yy Because BD-ROM is a new format, certain disc, digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Center.
Appendix Audio Output Specifications Jack/Setting Source HDMI OUT PCM DTS Re-encode *3 Dolby Digital PCM 5.1ch DTS Dolby Digital Dolby Digital Plus PCM 5.1ch DTS Dolby Digital Plus Dolby TrueHD PCM 5.1ch DTS Dolby TrueHD DTS PCM 5.1ch DTS DTS DTS-HD PCM 5.1ch DTS DTS-HD Linear PCM 2ch PCM 2ch DTS Linear PCM 2ch Linear PCM 5.1ch PCM 5.1ch DTS Linear PCM 5.1ch Linear PCM 7.1ch PCM 7.1ch DTS Linear PCM 7.
Appendix 69 Area Code List Choose an area code from this list.
Appendix Language Code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix 71 Trademarks and Licenses All other trademarks are trademarks of their respective owners. Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™, BONUSVIEW™ and the logos are trademarks of the Blu-ray Disc Association. DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or certification marks of the Digital Living Network Alliance. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
Appendix Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com.
Appendix 73 Specifications General Power requirements Power consumption Refer to main label on the bottom panel. Refer to main label on the bottom panel. Networked standby : 0.5 W (If all network ports are activated.) Dimensions (W x H x D) Approx. 410 mm x 55 mm X 260 mm Net Weight (Approx.) 2.7 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Inputs/Outputs HDMI IN/OUT (video/audio) 19 pin (Type A, HDMI™ Connector) ANALOG AUDIO IN 2.
Appendix Speakers Front speaker (Left/ Right) Type Impedance 2 Way 3 speaker Max. Input power 388 W 4Ω Net Dimensions (W x H x D) 290 mm X 1150 mm X 290 mm Net Weight 4.2 kg 2 Way 3 speaker Max. Input power 388 W 4Ω Net Dimensions (W x H x D) 290 mm X 1150 mm X 290 mm Net Weight 4.2 kg 2 Way 3 speaker Max. Input power 388 W 4Ω Net Dimensions (W x H x D) 342.5 mm X 86 mm X 87 mm Net Weight 1 kg 1 Way 1 speaker Max.
Appendix 75 Maintenance Notes on discs Handling discs Handling the unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Cleaning the unit To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution.
Appendix Important Information relating to Network Services All information, data, documents, communications, downloads, files, text, images, photographs, graphics, videos, webcasts, publications, tools, resources, software, code, programs, applets, widgets, applications, products and other content (“Content”) and all services and offerings (“Services”) provided or made available by or through any third party (each a “Service Provider”) is the sole responsibility of the Service Provider from whom it ori
