User Manual
Table Of Contents
- 1 Getting Started
- 2 Connecting
- 3 System Setting
- 4 Operating
- Using the Home Menu
- Basic Operations
- Other Operations
- Displaying Disc Information on-screen
- To display the DVD Menu
- To display the DVD title
- 1.5 times speed playback
- Screen Saver
- Starting play from selected time
- Resume playback
- Changing subtitle code page
- Marked Playback
- Viewing a PHOTO file
- Sleep Timer Setting
- Dimmer
- Turn off the sound temporarily
- Last Scene Memory
- Power Resume - Optional
- System Select - Optional
- Adjust the speaker level settings
- VOCAL FADER
- Auto power down
- How to disconnect the wireless network connection or the wireless device.
- Radio Operations
- Sound adjustment
- Advanced Operations
- Using a Bluetooth wireless technology
- Auto function change
- AUTO POWER On
- 5 Troubleshooting
- 6 Appendix
System Setting22
System Setting
3
Language
Menu Language
Select a language for the Setup menu and on screen
display.
Disc Audio / Disc Subtitle / Disc Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the disc
was recorded.
[Other]
To select another language, press numeric
buttons and then
b
ENTER to enter the
corresponding 4-digit number according to the
language code list on the page 40. If you
enter the wrong language code, press CLEAR.
[Off (for Disc Subtitle)]
Turns off Subtitle.
Display
TV Aspect
Select the screen aspect to use based on the shape
of your TV screen.
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Display Mode
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Letterbox]
Displays a wide picture with bands on the upper
and lower portions of the screen.
[Panscan]
Automatically displays the wide picture on the
entire screen and cuts off the portions that do
not t. (If the disc/le is not compatible with Pan
Scan, the picture is displayed at Letterbox ratio.)
Resolution
Sets the output resolution of HDMI video signal.
Refer to “Resolution Setting” for details about the
resolution (page 18).
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV. If VIDEO OUT is only
connected, this changes the resolution to 480i
(or 576i) as default resolution.
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[480p (or 576p)]
Outputs 480 (or 576) lines of progressive video.
[480i (or 576i)]
Outputs 480 (or (576) lines of interlaced video.