OWNER’S MANUAL DVD Wireless Home Theater System Please read this manual carefully before operating your set and retain it for future reference. LHD655W (LHD655W, S63T1-S, S63T1-C, S75T1-W, W4-2) www.lg.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started 3 POWER: This unit operates on a mains supply of 200 - 240 V ~, 50 / 60 Hz. Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Table of Contents Table of Contents 1 Getting Started 2 Connecting 2 6 6 6 6 6 6 7 7 7 7 7 8 9 10 11 Safety Information Unique Features – Portable In – USB Direct Recording – Full HD up-scaling – Home Theater Speaker ez Setup Accessories Introduction – Playable Discs – About the “7” Symbol Display – Symbols Used in this Manual – Regional Codes Playable file Requirement Remote control Front panel Rear panel 12 14 15 16 17 17 18 18 19 19 20 20 20 20 21 21 21 22 22 22 Assembling the speaker Attachin
Table of Contents 5 1 4 Operating 5 Troubleshooting 27 27 28 28 28 28 28 28 28 28 29 29 30 31 31 31 31 31 31 31 31 31 Using the Home Menu Basic Operations Other Operations – Displaying Disc Information on-screen – To display the DVD Menu – To display the DVD title – 1.
Getting Started Unique Features 1 Portable In Accessories Please check and identify the supplied accessories. Getting Started Listen to music from your portable device. (MP3, Notebook, etc.) USB Direct Recording Records music from CD to your USB device. Remote control (1) Battery (1) FM antenna (1) Speaker cables (5) HDMI cable (1) Video cable (1) Full HD up-scaling Views Full HD picture quality with simple setup.
Getting Started Introduction Playable Discs DVD-VIDEO (8 cm/12 cm disc) Discs such as movies that can be purchased or rented. DVD±R (8 cm/12 cm disc) Video mode and finalized only. DVD-RW (8 cm/12 cm disc) Video mode and finalized only. DVD+R: Video mode only Supports the double layer disc also.
Getting Started Playable file Requirement 1 Getting Started Music file requirement MP3/ WMA file compatibility with this unit is limited as follows : yy Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA) yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA) yy Support Version : v2, v7, v8, v9 yy Maximum files : Under 999 yy File extensions : “.mp3”/ “.
Getting Started 9 Remote control B OPEN/CLOSE : Opens and closes the disc tray. m INFO/DISPLAY : Accesses OnScreen Display. n HOME : Displays the [Home Menu]. DISC MENU : Accesses the menu on a DVD disc. • • • • • • b • • • • • • W/S/A/D (up/ down/ left/ right) : Used to navigate on-screen displays. MUTE : Mutes the sound. • • • • • • e • • • • • • 0-9 numerical buttons : Selects numbered options in a menu. h REPEAT : Selects a play mode.
Getting Started Front panel 1 Getting Started a Disc Tray b Display window Shows the current status of the unit. c PORT. IN Connects to a portable player with audio outputs. d USB Port Connects a USB device. e R (OPEN/CLOSE) Opens or closes the disc tray. f T (PLAY/PAUSE) Starts playback. Pauses playback temporarily, press again to exit pause mode. g I (STOP) Stops playback. h F (FUNCTION) Changes the input source or function. i -/+(Volume) Adjusts speaker volume.
Getting Started 11 Rear panel 1 Getting Started a Power cord b Speaker connectors Connects the speaker cables. c HDMI OUT Connects to TV with HDMI inputs. (Interface for digital audio and video) d AUX (L/R) INPUT Connects to an external source with 2 channel audio outputs. e VIDEO OUT Connects to a TV with video inputs. f ANTENNA FM- Connects the FM wired antenna g OPTICAL IN Connects to optical audio equipment.
Connecting Assembling the speaker 2. Draw the speaker cord through the hole on the base. Before connecting the speakers, assemble the speakers. Please check the items for assembling the speakers. 2 Preparation Connecting Pole Base Screw Speaker Speaker cables 1. Attach the pole to the base, then secure the connection with a supplied screw. ,,Note Make sure speaker cable unfolded or in straight condition before insert it to the hole.
Connecting 3. Attach the speakers to the speaker stands by rotating the screws. 13 4. Connect the speaker wire to the terminal on the speaker. Make sure the wire marked black goes in to the terminal marked “-”(minus) and the other wire goes in to the terminal marked “+”(plus) 2 Connecting ,,Note Do not catch the speaker cord between speaker and the pole. >>Caution Be careful that the speaker does not fall down.
Connecting Attaching the speakers to the unit 2 Connecting 1. Connect the wires to the unit. Match each wire’s colored band to the same colored connection terminal on the rear of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad.
Connecting Positioning the system The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position ( ). A G F A A Center speaker: Place the center speaker above or below the monitor or screen.
Connecting 16 2 Wireless speakers connection Manually pairing wireless receiver LED indicator of wireless receiver When your connection is not completed, you can see the red LED on the wireless receiver and rear speakers are not made sound. To solve the problem, follow the below steps. Connecting LED Color Operation Yellow-Green The wireless receiver is receiving the signal of the wireless TX. Red The Wireless Receiver is in standby mode.
Connecting How to Affix the Ferrite Core Ferrite core may not be provided depending on each nation’s regulations. Affix the Ferrite Core for power cord ,,Note yy If there is a strong electromagnetic wave product nearby, interference may occur. Put the unit (Wireless Receiver and main unit) away from there. yy If there is no audio signal for longer than 10 minutes, the Wireless Receiver will automatically switch to standby mode. In power saving mode, both LEDs will turn red.
Connecting Connections to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. ,,Note 2 Connecting yy Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual. HDMI Out Connection If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable (Type A, High Speed HDMI™ Cable).
Connecting ,,Note yy If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output. yy When you connect a HDMI or DVI compatible device make sure of the following: ,,Note yy Depending on the disc type or playing status, some SIMPLINK operation may differ from your purpose or not work.
Connecting Resolution Setting The unit provides several output resolutions for HDMI OUT. You can change the resolution using [Setup] menu. 1. Press n HOME. 2. Use A/D to select the [Setup] and press b ENTER. The [Setup] menu appears. Optional Equipment Connection AUX (L/R) INPUT Connection Connect an Output of auxiliary device to the AUX (L/R) INPUT Connector. 2 Connecting Unit 3. Use W/S to select [Display] option then press D to move to the second level. 4.
Connecting PORT. IN (Portable Input) Connection Connect an output of portable device (MP3 or PMP etc.) to the PORT. IN connector. 21 USB Connection Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. 2 MP3 player, etc... Listening to music from your portable player or external device Compatible USB Devices The unit can be used to play the music from many types of portable player or external devices.
Connecting OPTICAL IN connection Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN connector. Antenna Connection Connect the supplied FM antenna for listening to the radio. Connect the FM Wire antenna to the FM antenna connector. 2 Connecting To the digital optical output jack of your component Home theater speaker ez setup Listen to sound from TV, DVD and Digital Device with 5.1(2.1 or 2)ch mode.
System Setting 23 Adjust the setup settings By using the Setup menu, you can make various adjustments to items such as picture and sound. To display and exit the Setup menu 1. Press n HOME. Displays the [Home Menu]. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 23 to 26. OSD Initial language settings - Optional 1. Press 1 (POWER) to turn the unit on. The language setup menu will appear on the screen. 3.
System Setting Language Menu Language Select a language for the Setup menu and on screen display. Disc Audio / Disc Subtitle / Disc Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] 3 Refers to the original language in which the disc was recorded. System Setting [Other] To select another language, press numeric buttons and then b ENTER to enter the corresponding 4-digit number according to the language code list on the page 42.
System Setting 25 Audio DRC (Dynamic Range Control) 5.1 Speaker Setup Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Make the following settings for the built-in 5.1 channel surround decoder. Vocal 1. Select [5.1 Speaker Setup] on the [Audio] menu. Select [On] to mix karaoke channels into normal stereo. 2. Press b ENTER. The [5.1 SPEAKER] appears. This function is effective for multi-channel karaoke DVDs only. HD AV Sync 4.
System Setting Lock (Parental Control) Password You can enter or change password. Initial Setting the Area Code: When you use this unit for the first time, you have to set the Area Code. 1. Select the [Lock] menu and then press D. 2. Press D. To access the [Lock] options, you must input the password you have created. Input a password and press b ENTER. Enter it again and press b ENTER to verify. If you make a mistake before pressing b ENTER, press CLEAR. 3. Select the first character using WS buttons.
Operating 27 Using the Home Menu 1. Press n HOME. Displays the [Home Menu]. 2. Select an option by using AD. 3. Press b ENTER then selected option menu. [Music] – Displays [MUSIC] menu. [Movie] – Start video media’s playback or displays the [MOVIE] menu. [Photo] – Displays [PHOTO] menu. [Setup] – Displays the [Setup] menu. ,,Note Stop 2. Press n HOME. Displays the [Home Menu]. Press d PLAY, MONO/ STEREO. Pause Press M PAUSE/STEP.
Operating Other Operations Displaying Disc Information on-screen You can display various information about the disc loaded on-screen. r The 1.5 speed allows you to watch the pictures and listen to the sound quicker than playing at a normal speed. 1. During playback, press d PLAY, MONO/ STEREO to play at 1.5 times speed. “dX1.5” appears on the screen. 1. Press m INFO/DISPLAY to show various playback information. The displayed items differ depending on the disc type or playing status. 2.
Operating 29 ,,Note yy The resume point may be cleared when a button is pressed (for example; 1 (POWER), B OPEN/CLOSE, etc). yy This function may not work on some disc or title/track. Changing subtitle code page y If the subtitle is not displayed properly, you can change the subtitle code page to view the subtitle file properly. 1. During playback, press m INFO/DISPLAY to display the On-Screen display. 2. Use WS to select the [Code Page] option. 2.
Operating Viewing a PHOTO file About help menu in the full screen Menu Buttons Operation Menu m INFO/ DISPLAY Displaying the Option menu. a/d Prev./ Next A/D Moving to another file. i This unit can play discs with photo files. 1. Select [Photo] on the [Home Menu] and press b ENTER. Moving to the previous or next file list. x x RETURN List Returning to the [Photo] menu. Options while viewing a photo You can use various options during viewing a photo in full screen. 1.
Operating Sleep Timer Setting Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. To check the remaining time, press SLEEP. To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press SLEEP once again while “SLEEP 10” is displayed. ,,Note You can check the remaining time before the Unit turns off. Press SLEEP The remaining time appears in the display window.
Operating Radio Operations Be sure that FM antenna is connected. (Refer to the page 22.) Listening to the radio 1. Press P RADIO&INPUT until FM appears in the display window. The last received station is tuned in. 2. Press and hold TUNING (-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when the unit tunes in a station. or Press TUNING (-/+) repeatedly. 3. Adjust the volume by pressing VOL (-/+) repeatedly.
Operating 33 Sound adjustment Setting the surround mode This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT. ,,Note yy In some of surround modes, some speakers, there’s no sound or low sound. It depends on the mode of surround and the source of audio, it is not defective. yy This function is not operated when the microphone is connected to the unit.
Operating Advanced Operations Recording to USB You can record music or sound souce to USB device by connecting in to the port on the unit. yy During recording MP3/WMA, there is no sound. 1. Connect the USB device to the unit. yy When you stop recording during playback, the file that has been recorded at that time will be stored. (Except MP3/WMA files) 2. Select a mode in which you want to record. Playback a sound source first. 3. Start the recording by pressing X REC. 4.
Troubleshooting 35 Troubleshooting PROBLEM The unit does not work properly. CORRECTION yy Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again. yy Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. No power yy Plug the power cord into the wall outlet securely.
Appendix Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.
Appendix 37 Area Code List Choose an area code from this list.
Appendix Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix 39 Trademarks and Licenses All other trademarks are trademarks of their respective owners. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Notes on Copyrights yy This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Appendix Specifications General (LHD655W) Power requirements Refer to main label. Refer to main label. Power consumption Networked standby 0.4 W (If all network ports are activated.) Dimensions (W x H x D) (360 x 60.5 x 299) mm without foot Net Weight (Approx.) 2.69 kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 % Bus Power Supply 5 V 0 500 mA Inputs/ Outputs VIDEO OUT 1.
Appendix 41 Front Speaker (S63T1-S) Type 1 way 1 speaker Impedance Rated 3Ω Input Power 167 W Max. Input Power 334 W Net Dimensions (W x H x D) (250 x 1100 x 250) mm Net Weight 3.5 kg Rear Speaker (S63T1-S) Type 1 way 1 speaker Impedance Rated 3Ω Input Power 167 W Max. Input Power 334 W Net Dimensions (W x H x D) (250 x 1100 x 250) mm Net Weight 3.5 kg Centre Speaker (S63T1-C) Type 1 way 1 speaker Impedance Rated 3Ω Input Power 167 W Max.
